• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.10
• /
• pp.45-52
• /
• 1997

An analysis method for the electromagnetic scattering of a gaussian beam wave by finite periodic conducting strip grating on a groudned dielectric slab is considered. The intergral equation for the unknown current induced on the conducting strip surface is derived and solbed numerically by use of the method of moment. From knowledge of the strip current, the quantities of interest such as radiation pattern, the space wave power radiated into the free space, and the coupled surface wave power propagating along the dielectric slab are computed for the appropriately chosen parametes Some similarity between scattering behaviours of the present geometry and the infinite geometry is examined by observing the Off-bragg as well as bragg blaxing penomena in both geometries.The validity of the numerical results are assured by a check of the power conservation relations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.5
• /
• pp.727-737
• /
• 1999

Printed microstrip antennas are known to have limitations in terms of bandwidth and efficiency all imposed by the presence of the dielectric substrate. In this paper, to overcome these limitations, rather than using a superstrate geometry, the printed circuit is etched out of metal and supported in "strategic points" by(metallic or nonmetallic) post. The main motivation for this work was to obtain the wide bandwidth microstrip antennal which exhibits a higher efficiency than conventional ones. In this paper, to increase the bandwidth, patch sizes, electrical thickness and impedance matching are considered.

• Journal of Advanced Navigation Technology
• /
• v.10 no.2
• /
• pp.152-158
• /
• 2006

In this paper, electromagnetic scattering problems by a resistive strip grating with zero resistivity at the strip-edges on a grounded 2 dielectric layers according as strip width and spacing, relative permittivity, thickness of dielectric layers, and incident angles of a electric wave are analyzed by applying the FGMM(Fourier-Galerkin Moment Method) known as a numerical procedure. The scattered electromagnetic fields are expanded in a series of floguet mode functions. The boundary conditions are applied to obtain the unknown field coefficients and the resistive boundary condition is used for the relationship between the tangential electric field and the electric current density on the strip. The tapered resistivity of resistive strips varies zero resistivity at strip edges. Then the induced surface current density on the resistive strip is expanded in a series of Chebyshev polynomials of the second kind. The normalized reflected power with zero resistivity in this paper show in good agreement with those of existing paper.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.2
• /
• pp.247-256
• /
• 1999

The leaky wave emanated from the dielectric-coated parallel-plate waveguide with finite periodic thick slot in its upper plate is investigated theoretically for H-polarization case. For this structure, fields in slot regions are expressed as a summation of the parallel-plate waveguide TM modes, and in other regions are expressed in the spectral domain by use of the inverse Fourier transform. Boundary conditions at the interfaces are enforced, and the simultaneous linear equations are derived. The influences of the slot width, slot thickness, thickness of a dielectric coating, and finite slot number on the radiation characteristics (phase constant, leakage constant, radiation pattern) are examined. The results of the finite periodic slot are compared with those of the infinite extent structure and good agreement has been found.

• Korean Journal of Materials Research
• /
• v.11 no.4
• /
• pp.305-311
• /
• 2001

$PbO-B_2O_3-SiO_2-Al_2O_3$, system was investigated for optical, thermal and electrical properties of transparent dielectric. We also studied the reaction between transparent dielectric and transparent electrode(Indium Tin Oxide, ITO) during firing. For the evaluation of properties, dielectrics were prepared under the conditions fired at 520~58$0^{\circ}C$ with 12$\mu\textrm{m}$ thickness. In the reaction between dielectrics and electrode(ITO), In ions diffused into dielectric layer, while Sn ion diffusion was not observed. The coefficient of thermal expansion, the dielectric constant, the glass transition temperature and the transmittance of the dielectric were greatly dependent on PbO content. The increase of the coefficient of thermal expansion and the dielectric constant were monitored by increasing PbO, while the glass transition temperature and the transmittance were decreased. With the increased $Al_2O_3/B_2O_3$ ratio, the coefficient of thermal expansion and the transmittance were decreased, while the dielectric constant was increased. The glass transition temperature did not change significantly.

• Journal of the Korean Ceramic Society
• /
• v.39 no.3
• /
• pp.226-232
• /
• 2002

We searched thermal stability of ${\alpha}-Fe_2O_3$ using red color filter for display. In the PDP(Plasma Display Panel), the color filter layer is lied normally between front glass and transparent dielectric materials, so it might be needed to study the reaction of ${\alpha}-Fe_2O_3$ and transparent dielectric materials. The transparent dielectric materials containing ZnO has good transparency. Red colorlayer of ${\alpha}-Fe_2O_3$ contacted with dielectric material layer containing ZnO is changed to colorlessness over 500$^{\circ}$C because ZnO defuse ${\alpha}-Fe_2O_3$, the dielectric materials without ZnO, however, maintain red color at the same condition. We suggest that a layer contacting with ${\alpha}-Fe_2O_3$ red color layer has to lie with transparent dielectric materials without ZnO, then the materials containing ZnO is coated over to get color of ${\alpha}-Fe_2O_3$ for red color filter