• Title/Summary/Keyword: 유입구

Search Result 598, Processing Time 0.028 seconds

Hydraulic Characteristics of the Wave Chamber Installed Rubble Mound Seawater Exchange Breakwater (유수실 내장 경사식 해수교환방파제의 수리특성)

  • 이달수;오영민;전인식;김창일
    • Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
    • /
    • 2003.08a
    • /
    • pp.110-117
    • /
    • 2003
  • 해수교환방파제란 방파제에 설치된 통수구를 통해 해수가 항내로 일방향으로 유입되거나 통수구에서 양방향 흐름이 발생함으로써 종국에는 항내ㆍ외간의 해수교환이 활발하게 이루어지게 하는 방파제를 말한다. 그리고 방파제를 통한 순유입유량이 클수록 해수교환의 영향은 항내의 넓은 수역까지 미친다. (중략)

  • PDF

Heating and cooling properties in cultivation room and cultural characteristics of oyster mushroom according to type of air exchange (외부공기 유입방식에 따른 느타리버섯 생육실의 온도변화 및 자실체의 생육특성)

  • Jang, Myoung-Jun;Lee, Yun-Hae;Ju, Young-Cheol
    • Journal of Mushroom
    • /
    • v.11 no.4
    • /
    • pp.214-218
    • /
    • 2013
  • This study was carried out to find out suitable input method for air exchange about bottle cultivation of oyster mushroom. There was no difference of average temperature in cultivation room, but T1(direct introduction of outside air) was higher than T2(heat exchanger) and T3(air buffer) in the standard deviation. The ratio of cooling operating was the highest in August and in the descending order, T1 54%, T3 43%, T2 33%. At ratio of energy reduction, T2 and T3 were higher than T1. The operating ratio of heater was highest in January and in the descending order, T1 53%, T3 37%, T2 30%. At ratio of energy reduction(%), T2 and T3 were higher than T1 similar to result of cooling operating. Therefore there were largest in August about Cooling Degree-Hour and in January about Heating Degree-Hour. And fruitbody yields quality was excellent in T2 and T3 than T1. The suitable effective type of air exchange in oyster mushroom cultivation are heat exchange and air buffer system.

Recirculation Characteristics by the Inlet Angle and Dome Size of a Liquid Ramjet Combustor using PIV Method (PIV측정을 통한 램제트 연소기의 유입각과 돔 크기에 따른 선회 유동 특성)

  • Kim, Gyu-Nam;Lee, Choong-Won;Sohn, Chang-Hyun
    • Journal of the Korean Society of Propulsion Engineers
    • /
    • v.11 no.1
    • /
    • pp.51-56
    • /
    • 2007
  • Flow characteristics in a liquid fuel ramjet combustor were investigated using the PIV method. The combustor has two rectangular inlets that form a $90^{\circ}$ angle each other. Three cases of test combustors are made in which those inlet angles are $30^{\circ},\;45^{\circ}\;and\;60^{\circ}$. The experiments were performed in a water tunnel test with the same Reynolds number as Mach 0.3 at the inlet. PIV software was developed to measure the characteristics of the flow field in the combustor. A large and complex recirculating flow was measured in the dome area with 4 different dome size. Experimental results shows that 1/3 dome size of combustor diameter is suitable and smaller inlet angle provide large recirculation flow at the dome of combustor as a frame holder in this experimental ranges but need to consider secondary recirculation flow in a junction region to optimize the configuration of ramjet combustor.

A Study on Flow Distribution in a Clean Room with Multiple Exits (다수의 출구를 가지는 크린룸 내부의 기류분포에 관한 연구)

  • Lee, Jae-Heon;Lee, Sie-Un;Kim, Sukhyun
    • The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
    • /
    • v.17 no.4
    • /
    • pp.418-425
    • /
    • 1988
  • Since conventional computer program is workable only with velocity boundary condition, in practical fluid passage such as clean room which usually have wide inlets and outlets, it is not easy to measure velocity itself because of its vector property. Furthermore a certain assumption of velocity at boundaries may lead to physically unreasonable results. From this motivation, we have developed a computer program to predict whole flow field imposed on pressure-based boundary condition which can be measured by relatively simple method. The only additional velocity boundary condition that should be imposed on to make the problem unique, are no slip condition at all walls and zero cross stream velocity at inlet. The result of present study was compared with that by Bernoulli equation being used practically. They were coincident well each other within 5%, therefore the validity of the present method is proved. In the present work, the flow field in a clean room subject to pressure-based boundary conditions at an inlet and two exits was predicted numerically. The pressure difference between the inlet and the left exit which keeps relatively low pressure among two exits is fixed as 150[Pa] and the pressure at the right exit is varied from zero to 150[Pa] by the increment of 25[Pa]. For each cases the flow characteristics in the clean room, the velocity profile at the inlet, and the flow rate through the two exits was predicted. The flow rate through the right exit imposed on relatively higher pressure than the left exit decreased linearly according to the increase of pressure of the right exit. When the pressure of the right exit is increased enough to cause back flow at the exit, the flow rate is rapidly decreased.

  • PDF

An Analysis of Interception Efficiency at Transverse Grate Inlets (횡유입부의 차집효율 분석)

  • Kim, Jea-Kwon;Kim, Jung-Soo;Lee, Joon-Ho;Yoon, Sei-Eui
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2006.05a
    • /
    • pp.519-523
    • /
    • 2006
  • 간선도로의 유입부 설계에는 도로 표면에 떨어진 강우만을 고려하여 빗물받이 간격, 형태 등을 결정하고 있으나, 현실적으로는 간선도로와 연결된 소규모 도로에서 횡유입부로 유입되지 않는 유량이 간선도로의 침수를 가중시키고 있는 실정이다. 이러한 점들을 고려할 때, 침수피해에 의한 시민들의 재산을 보호하고 불편을 덜어주기 위해 소규모 도로의 합리적인 배수시설이 필요하며, 이런 배수시설로 부각되는 횡유입부의 차집효율을 분석할 필요가 있다. 본 연구에서는 횡유입부의 설계 실태를 조사하고, 현장조사를 실시하여 수리인자들을 실측하여, 실험장치의 제작과 효율적인 실험조건을 선정하였다. 도로에서 횡방향으로 설치되어 있는 빗물받이 유입구의 규모에 따른 가능 최대 차집유량과 그에 따른 효율을 분석하기 위하여 도로 종경사$(2{\sim}11.5%)$, 유량$(1.5{\sim}24{\ell}/sec)$, 빗물받이 유입구의 규모 및 형태(TYPEⅠ, TYPEⅡ)를 변화시키면서 실험을 실시하였다. 실측 자료를 분석한 결과, 도로의 종경사가 6%이상이 되면, 횡유입부의 차집효율이 급히 감소되는 것을 알 수 있었으며, 빗물받이 유입구 TYPEⅠ의 형태가 TYPEⅡ의 경우보다 차집효율이 현저하게 감소하고 있음을 알 수 있었다.

  • PDF

Spatio-temporal Variation of Incoming Nutrient into Shindu Coastal Dune, Korea (신두해안사구지대로 유입되는 영양염류의 시공간적 특성)

  • Yu, Keun-Bae;Shin, Young-Ho;Kim, Dae-Hyun;Kim, Sung-Hwan
    • Journal of the Korean Geographical Society
    • /
    • v.47 no.2
    • /
    • pp.193-207
    • /
    • 2012
  • This study discussed characteristics of Shindu Coastal Dune as habitat, and relationship between geodiversity and biodiversity. It was identified spatio-temporal variation of incoming nutrients depended on geomorphic differences of foredunes. The main incoming path of nutrients into coastal dune was considered as influx with movement of wind blown sands from the beach and tidal f lat. Concentrations of Na, Mg, K, Ca, and P in blown sands were compared. Concentrations of Na, Mg, and K showed high and irregular pattern in favorable condition of influx of blown sand. So these nutrients were related with geomorphic characteristics of foredunes. However, Na was also influenced by other factor such as salt spray. P was independent from effects of sea water and blown sands. In the case of Ca, a large coastal dune system rather than localized forms of foredunes made differences in the variation. Due to differences in spatio-temporal variation of nutrients, patterns of major vegetation could be inferred to appear differently. This study shows geomorphic dynamics of coastal dunes as habitat, and will provide information for coastal dune management and for understanding biological distribution and growth pattern in coastal dune.

  • PDF

Study on Pollutant Diffusion in the Midstream of Youngsan River (영산강 중류부의 오염물질 이송특성 연구)

  • Kim, Jung-Min;Park, Sung-Chun;Kim, Dong-Soo;Moon, Byoung-Seok
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2006.05a
    • /
    • pp.1646-1650
    • /
    • 2006
  • 본 연구에서는 영산강의 수질이 가장 심각한 광주하수처리장 방류구 직하류부에 대한 오염물질 확산에 시.공간적 분포양상을 파악하기 위하여 대상하천 영산강 본류의 25km구간에 RMA4 모델을 적용하여 오염 물질의 농도변화를 예측하였다. RMA4 모델의 적용을 위하여 RMA2 모델을 수행하여 구한 출력자료를 입력자료 사용하였으며, 수치모델의 적용을 위하여 연구 대상하천의 25km구간에 대하여 유한요소망은 2,304개의 절점과 7,635개의 요소로 구성하였다. 광주하수처리장 방류구 직하류부에 대한 오염물질 확산에 시.공간적 분포양상을 파악하기 위하여 광주하수종말처리장의 방류수에 의한 오염물질유입에 대한 4개의 시나리오를 작성하여 RMA4 모델을 수행하였으며, 광주하수종말처리장의 평균방류량 6.13cms와 BOD 수질기준 110mg/L(2004년 하수종말처리장 유입원수의 평균농도)의 농도를 유입 오염물질로 가정하여 영산강의 저수기의 유출량을 대상으로 오염물질 유입시간에 따라 4개의 시나리오에 대한 오염물질의 확산의 시.공간적 분포양상, 유하길이에 대한 오염물질의 최대 오염원농도 도달시간을 제시하였다.

  • PDF

Internal Flow Characteristics for Tangential Entry Conditions in a Swirl Injector (스월 인젝터에서 접선방향 유입구 조건에 따른 내부유동의 특성 연구)

  • Kim, Sung-Hyuk;Khil, Tae-Ock;Cho, Seong-Ho;Yoon, Young-Bin
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2008.05a
    • /
    • pp.115-118
    • /
    • 2008
  • Many theoretical and experimental studies have been conducted to investigate elements of the hydrodynamic process, such as variations in liquid film thickness or air core diameter. From these studies, some theoretical relationships have been established through an approximated analytical solution of flow hydrodynamics in a swirl nozzle. However, experimental studies on elements such as internal flow have not produced conclusive results. In this study, the variations and stability of the internal flow were examined by visualizing the air core and measuring the liquid film thickness.

  • PDF

Internal Flow Stability for Tangential Entry Conditions in a Swirl Injector (스월 인젝터에서 접선방향 유입구 조건이 내부유동의 안정성에 미치는 영향에 대한 연구)

  • Kim, Sung-Hyuk;Khil, Tae-Ock;Cho, Seong-Ho;Yoon, Young-Bin
    • Journal of the Korean Society of Propulsion Engineers
    • /
    • v.12 no.6
    • /
    • pp.30-37
    • /
    • 2008
  • Many theoretical and experimental studies have been conducted to investigate elements of swirl injector hydrodynamics, such as variations in liquid film thickness or air core diameter. From these studies, some theoretical relationships have been established through an approximate analytical solution of flow hydrodynamics in a swirl nozzle. However, experimental studies on elements such as the stability of internal flow have not produced conclusive results. In this study, the stability of the internal flow under tangential entry conditions was examined by visualizing the formation of the air core in the swirl chamber and measuring the liquid film thickness in the orifice.

Installation of Wastewater reuse System for Supply of Agricultural Use (하수처리수의 농업용수 재이용 공급시스템 시범설치)

  • Lee, Kwang-Ya;Kim, Hae-Do;Chung, Kwang-Kun
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2007.05a
    • /
    • pp.662-666
    • /
    • 2007
  • 하수처리수를 농업용 목적으로 재이용하기 위한 기술을 실제 현장에 보급하기 위해 하수처리수가 주 수원공인 양수장에 하수처리수 재처리시스템인 $\ulcorner$농업용수 재이용공급시스템$\lrcorner$을 설치하였다. 본 양수장은 1992년 준공되었으며 양수장 유입구 상류 200m지점에 하수종말처리장 방류구가 위치해 있어 직접적으로 하수처리수가 양수장에 유입되어 농경지에 관개수를 공급하고 있었다. 본 시스템을 설치하기 위해 연간 사용량을 조사하여 적정 처리유량 및 운전시간을 설계하였고 유입수 수질분석을 바탕으로 하수재이용 공급시스템을 설치하여 관개목적에 적합한 수질로 공급할 수 있도록 하였다. 또한 수질 모니터링 시스템을 설치하여 공급 기간 동안 수질변동 상황에 대해 신속한 대처가 가능하도록 시스템을 구성하였다. 현재 농촌지역은 주변상황으로 인해 하수처리수를 관개용수로 이용할 수밖에 없는 지역이 발생하고 있고 앞으로도 하수처리장이 계속 증설되고 있는 한 기존의 농업수리시설물은 하수처리수의 영향이 더욱 커질 것으로 판단되므로 이러한 깨끗한 용수가 위협을 받고 있는 지역에 대해서는 안전한 농산물 생산 도모가 가능한 $\ulcorner$농업용수 재이용 공급시스템$\lrcorner$의 도입이 고려되어야 할 것이다.

  • PDF