• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.486-490
• /
• 2017

도심지에서의 침수피해는 이상홍수 및 국지성 호우 시 우수관거 시설기준 미달, 펌프장 등 배수시설이 설치되지 않아 하천의 계획홍수위보다 제내지의 지반고가 낮은 저지대 지역에서 많이 발생하고 있다. 특히, 내수침수의 경우는 외수에 따른 범람보다는 국민의 재산과 인명피해에 직접적인 영향을 미치므로 침수피해 위험도가 높은 지역의 주민에게 그 지역의 침수빈도와 범위를 인지시키고 사전대응 능력을 향상시킬 필요가 있다. 따라서 연구의 목적으로 매년 피해가 발생한 이력이 있는 위험지구에 대해 전국단위 시군구별 침수피해 지도를 작성하여 침수심 산정과 피해액 예측할 수 있는 기초자료로 활용하고, 주민들의 신속한 대처를 통해 그들의 생명과 재산을 보호하여 재난 안전 국가 이미지 제고에 기여하고자 한다. 본 연구에서는 도심지 유출모형인 XP-SWMM을 활용하여 내수재해 위험요인에 대한 전국을 해석하는 것에 한계가 있어 풍수해저감종합계획에 수록된 XP-SWMM모의 분석 결과 값을 활용하고자 하였다. 기 수립된 전국 풍수해저감종합계획의 과거 피해 자료를 바탕으로 이상 집중호우나 태풍의 내습 시 풍수해 피해 발생 가능성이 제일 높은 지역을 연구범위 대상지역으로 선정하였다. 그 중 풍수해의 주요 원인으로서 태풍, 집중호우 및 해일로 인한 피해발생 빈도가 높은 지역이면서 하천재해 및 내수침수 피해가 많은 경기도 동두천시를 연구대상 지역으로 선정하였으며, 대상지 유역 현황과 지형정보 및 빈도별 침수심을 조사하였다. 수록된 내용에 따르면 경기도 동두천시는 우수관망의 밀도가 높은 4개 위험지구를 내수재해 발생가능성 지역으로 선정하여 10년, 20년, 30년, 50년, 100년, 200년 6개 빈도에 대해 XP-SWMM 모의를 실시하였다. 이와 같이 수록된 각 빈도에 대한 모의 결과 값을 GIS기술을 이용하여 디지털화 하고 부가적인 분석을 위한 GIS데이터화 하는 내삽법을 선정하여 침수면적 및 침수심을 산출하였다. 그러나 면적비교를 통해 모의 결과 값을 디지털화 하는 과정에서 많은 오차가 발생되는 것을 확인하였고, 이를 보완하기 위해 좌표보정 자동화 프로그램을 개발하여 이러한 문제점을 제거하여 신뢰도를 향상시켰다. 이렇게 계산된 연구 대상지역의 침수심과 침수면적을 활용하여 지도제작 표준 지침서 및 가이드라인을 제시하여 한국형 호우피해 지도제작 기술개발에 기여하고, 비구조적 대책으로서 이상홍수에 대한 위험도를 파악하여 지역별 도심침수 방지를 위한 대비체계를 구축하는 등 위험지역에 대한 사전분석 및 활용에 기초자료로 도움이 되고자 한다.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.4
• /
• pp.289-299
• /
• 2011

We studied the characteristics of pollutant concentrations in 9 streams that flow into Shihwa Lake in order to provide the scientific data for effective implementation of total pollution loads management system (TPLMS) of the Lake. Suspended solid (SS), chemical oxygen demand (COD), dissolved nutrients ($NO_2$, $NO_3$, $NH_4$, $PO_4$ and $SiO_2$), total phosphorus (TP) and total nitrogen (TN) in stream water from industrial complexes, urban and agricultural regions were determined. Pollutant concentrations in December were higher than that in other sampling periods. COD concentration from industrial complex region with average of 12.6 mg/L was 2 times higher those from urban region (6.6 mg/L) and agricultural region (5.9 mg/L). TP concentration from industrial region also showed higher concentration than other regions. TN concentration in stream water was 5.89 mg/L for industrial region, 3.02 mg/L for urban region and 5.27 mg/L for agricultural region, respectively, suggesting inflow of TN due to fertilizer usage in agricultural field. Relative percentage of nitrogen compounds in TN follows the sequence: $NH_4$ (35.1%) > $NO_2$ (20.0%) > DON (22.8%) > PON (8.9%) > $NO_2$ (3.2%). Concentrations of dissolved nutrients, TP and TN in stream water were 3.2~37.2 times higher than that in Shihwa Lake seawater, therefore large amount of pollutants may be directly entered into Shihwa Lake without any treatment. For Gunja stream of industrial region, pollutants at midstream showed relatively higher concentration compared to upstream and downstream. It is necessary to manage the illegal discharging of sewage and waste water. Our results provide valuable informations on the estimation and reduction of total pollutant loads in the process of establishing adequately strategic and implemental plan of Shihwa Lake TPLMS.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.3 no.3 s.10
• /
• pp.151-163
• /
• 2003

In this study, the algorithm of groundwater flow process was established for koreanized groundwater program development dealing with the geographic and geologic conditions of the aquifer have dynamic behaviour in groundwater flow system. All the input data settings of the 3-DFM model which is developed in this study are organized in Korean, and the model contains help function for each input data. Thus, it is designed to get detailed information about each input parameter when the mouse pointer is placed on the corresponding input parameter. This model also is designed to easily specify the geologic boundary condition for each stratum or initial head data in the work sheet. In addition, this model is designed to display boxes for input parameter writing for each analysis condition so that the setting for each parameter is not so complicated as existing MODFLOW is when steady and unsteady flow analysis are performed as well as the analysis for the characteristics of each stratum. Descriptions for input data are displayed on the right side of the window while the analysis results are displayed on the left side as well as the TXT file for this results is available to see. The model developed in this study is a numerical model using finite differential method, and the applicability of the model was examined by comparing and analyzing observed and simulated groundwater heads computed by the application of real recharge amount and the estimation of parameters. The 3-DFM model is applied in this study to Sehwa-ri, and Songdang-ri area, Jeju, Korea for analysis of groundwater flow system according to pumping, and obtained the results that the observed and computed groundwater head were almost in accordance with each other showing the range of 0.03 - 0.07 error percent. It is analyzed that the groundwater flow distributed evenly from Nopen-orum and Munseogi-orum to Wolang-bong, Yongnuni-orum, and Songja-bong through the computation of equipotentials and velocity vector using the analysis result of simulation which was performed before the pumping started in the study area. These analysis results show the accordance with MODFLOW's.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.4
• /
• pp.71-80
• /
• 2009

Although desire for living without hazardous damages grows these days, threats from natural disasters which we are currently exposed to are quiet different from what we have experienced. To cope with this changing situation, it is necessary to assess the characteristics of the natural disasters. Therefore, the main purpose of this research is to suggest a methodology to estimate the potential property loss and assess the flood risk using a regional regression analysis. Since the flood damage mainly consists of loss of lives and property damages, it is reasonable to express the results of a flood risk assessment with the loss of lives and the property damages that are vulnerable to flood. The regional regression analysis has been commonly used to find relationships between regional characteristics of a watershed and parameters of rainfall-runoff models or probability distribution models. In our research, however, this model is applied to estimate the potential flood damage as follows; 1) a nonlinear model between the flood damage and the hourly rainfall is found in gauged regions which have sufficient damage and rainfall data, and 2) a regression model is developed from the relationship between the coefficients of the nonlinear models and socio-economic indicators in the gauged regions. This method enables us to quantitatively analyze the impact of the regional indicators on the flood damage and to estimate the damage through the application of the regional regression model to ungauged regions which do not have sufficient data. Moreover the flood risk map is developed by Flood Vulnerability Index (FVI) which is equal to the ratio of the estimated flood damage to the total regional property. Comparing the results of this research with Potential Flood Damage (PFD) reported in the Long-term Korea National Water Resources Plan, the exports' mistaken opinions could affect the weighting procedure of PFD, but the proposed approach based on the regional regression would overcome the drawback of PFD. It was found that FVI is highly correlated with the past damage, while PFD does not reflect the regional vulnerabilities.