• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.1
• /
• pp.55-64
• /
• 2002

Due to the friction characteristics of cylinders and the rail of a passenger car, in the system actuated with hydraulic systems, there exist dead zones, which can not be controlled by a PID controller. In this paper, the friction characteristics of a cylinder is examined, which may cause the abrupt increase of the acceleration in the zero-crossing speed region. To overcome the drawbacks of a PID controlled hydraulic system, a zooming fuzzy logic controller is designed and finally an improved hybrid controller is Proposed. The proposed controller is composed of the PID controller and the zooming fuzzy controller. The effectiveness of the proposed control scheme is shown by simulation and experimental results, In which the proposed hybrid control method yields good control performance not only in the zero-crossing speed region but also In the overall control region including steady-state region.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.4738-4744
• /
• 2011

This study proposes the system of new small sluice gate operated without the upper concrete structure. The new mechanism is composed of hydraulic system, driving mechanism to feed the floodgate up and down, hydrological locking device, safety device and etc. The hydraulic pumps and control systems away from the location of the sluice gate systems are installed and controled in place. The feed device with the hydraulic rack, pinion and hydraulic actuator is installed on the side of the sluice gate. The following results take the advantages of cost reduction, operation safety and compact product.

• Tribology and Lubricants
• /
• v.35 no.4
• /
• pp.215-221
• /
• 2019

A gerotor set consists of two elements, an inner rotor and an outer rotor. The outer rotor has one more tooth than the inner rotor and has its centerline positioned at a fixed eccentricity from the centerline of the inner rotor. Although gerotors come in a variety of geometric configurations, all gerotor sets share the basic principle of having generated tooth profiles that provide continuous tight sealing during operation. The size of the gerotor is proportional to the number of teeth and the amount of eccentricity. The interior of an inner rotor with a large number of teeth has an enough space to include other machine elements. In this paper, the double gerotor mechanism, constructed by putting a small gerotor in the interior of a large inner rotor, is conceptualized. The double gerotor set is composed of an inner rotor, a planetary rotor, and an outer rotor. The inside profile of the planetary rotor corresponds to the outer rotor profile of the small gerotor, and the outside profile is the inner rotor profile of the large gerotor. In the double gerotor, the centers of the inner and the outer rotor are coincident because the eccentricities of two gerotors are balanced. The operation of a double gerotor is examined by analyzing the planetary motion, and a feasibility study for application of the double gerotor for hydraulic motors and pumps is performed. The double gerotor set has much application potential as a component of hydraulic systems.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1991.06a
• /
• pp.55-59
• /
• 1991

실중적으로 하중을 받는 선접촉부의 윤활명성은 johnson chart, 또는 Hooke의 Chart에서 나타난바와 같이 강체$\cdot$점도일정명감 (Rigid-Isovicosity region), 점도변화 명성 (Elasticity-Variable Viscosity Region), 탄성체$\cdot$점도일정명성 (Elasticity-Isoviscosity Region)으로 분산 되어지는데 명성내에서 2차원 선접촉의 경우 탄성 파라메터 ge가 적고 점성 파라미터 gv가 큰 Tribology적인 실제 문제가 많은데 비하여 이 점성에서의 윤활특성에 관한 수치적인 Simulation이나 실험적인 보고가 거의 없는 실정이다. 예를들면 engine의 Piston Ring과 Cylinder 간의 윤활, Vane 식의 유압펌프등에서 볼수 있는 습동부의 윤활, Rotary Engine의 Rotor 선단부분, Rotary Compressor의 Rotor와 stator간의 상대운동 점성에서 나타나는 Tribology적인 점성은 대부분이 강체$\cdot$점도 변화점성이거나 그에 바로 인접한 탄생체$\cdot$점도 변화의 초기 점성에 분포하고 있다.

• Journal of Applied Reliability
• /
• v.11 no.4
• /
• pp.371-385
• /
• 2011

Because consumer mostly utilizes company test standard, supplier spends burden of expenses on building test equipments and managing expert manpower to fulfill consumer's various tests. Therefore, it is urgent to standardize test assessment which has a bond of sympathy between consumer and supplier and evaluates reliability of their products. This study develops reliability assessment standard which is composed of 12 test items considering international and domestic test standards, company internal test standards of consumer companies and field conditions. Also this study introduces overall technical procedure on accelerated test with no failure which is used for the main technology of reliability assessment. To verify effectiveness of reliability assessment, the test results are herein analyzed through building the test equipments and performing the test items.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.03a
• /
• pp.281-286
• /
• 1998

In this paper, a Helmholtz resonator type hydraulic filter is proposed to absorb flow and pressure ripple produced from a axial piston pump. The basic principle of hydraulic filter is applied to propagation of preossure waves, reflection, absorption in cross section of discontinuity and resonance in the pipeline. This filter has advantage of the compact size and high degree of freedom of installation. The design scheme of hydraulic filter based on viscous wave theory are developed and manufactured two kinds of filter to investigate damping capability. It is experimently confirmed that these filter is absorbed to be about 20dB of flow and pressure ripple with high frequencies.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1993.04a
• /
• pp.65-70
• /
• 1993

본 연구에서는, 제철 열간 압연기에서 slab가 진입, 추출시 충격으로 인한 진 동에 의해 두께 조절용 위치센서가 오작동을 하는 원인을 규명하고 그 해결 책을 제시하고자, 기존 AGC Top Plate와 위치 감지센서의 작동 상태 및 진 동특성을 검정하였고, 문제점을 발견하여 각각의 구조를 개선, 재측정하여 개선정도를 확인하였다. Disk형 AGC Top Plate는 직경을 줄이고, 두께를 늘 여 자체 진동을 감소시켜, Plate 진동에 의한 위치센서의 오작동 원인 및 이 에 의해 제어 유압펌프에 Feedback되어 top부 제어계에 발생하는 Hunting현 상을 줄였다. 위치센서는 내부 Spring의 초기변형량을 증가시켜 내탄성에너 지량을 증가시켜, 센서자체의 진동 및 측정시 나타나는 여진현상을 제거하였 다. 본 연구를 통한 측정결과로는 최대 82.7%의 제진효과와 여진현상의 제거 효과를 보았다.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.156-158
• /
• 2008

Along the various gap distance between shoe and swash plate and pocket diameter, lifting force of piston shoe during the compressing stage was calculated. The flow in piston, orifice, shoe, and back space was considered to be 2-dimension axisymmetric and analysed by Fluent, a commercial CFD Software. The wall boundary condition was given as nonslip and adiabatic, while the change in fluid viscosity was considered as linear along temperature. Calculated lifting force and oil leakage of shoe was used in the design of a pump to confirm the shape of the shoe.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.2
• /
• pp.191-199
• /
• 1992

This paper presents in experimental study of the dynamic internal pressure within an oil hydraulic vane pump. The measurements of the dynamic internal pressures near the vane of a pressure balance type of an oil hydraulic vane pump with intravanes has been made to provide the essential information for the study of the pump dynamics and control, the pump design and the analysis of tribological problems in the sliding components. The influences of the discharge pressure and rotating speed of the vane on the dynamic pressure in four chambers surrounding a vane have been investigated. The results indicate that the surge pressures of the chambers at the instant moment of discharge and closure are affected by the rotating speed. The pressure in the intravane chamber maintains almost constant values, which remarkably effects the pulsating discharge pressure.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04b
• /
• pp.267-272
• /
• 1995

The paper describes an approach for measuring flow ripple generated by oil hydraulic axial piston pumps. Flow ripple has periodic waveforms due to the cyclic nature of a pump's operation, and interacts with the connected hydraulic systems such as pipes and components to produce a pressure ripple, also known as fluid-borne noise. It is indispensable to measure a flow ripple because increasing of vibration and noise caused by a flow ripple has become a point to be considered and has need of solving these problems. The measurement of flow ripple with high frequencies from oil hydraulic axial piston pumps is msde by using the remote instantaneous flow rate measurement method. As a result, the reverse flow through the relief groove in valve plate has an important effect upon a flow ripple generated by a pumps.