• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.540-545
• /
• 2002

The tight integration of the part design and process planning is very effective to high quality product development and cost effective manufacturing. Moreover, the integration in the early design stage, that is, the integration of the conceptual design and the conceptual process planning may take a big impact with the forecasting the alternative of the design and manufacturing. In this paper, the real field parts are studied about the relations among the Feature, Function, and Manufacturing Process taking the style of reverse engineering method, to found the base of the systematic computer system for the integrated product design and manufacturing process planning.

• 한국기계가공학회지
• /
• 제1권1호
• /
• pp.38-47
• /
• 2002

Machining quality has been improved with the development of cutting tools. However, it is difficult to obtain a high degree of quality in machining a deep pocket with a long end mill, since machining accuracy is mainly dependent on the stiffness of the cutting tool and tool holder. To improve machining quality in machining a deep pocket using an end mill, the performance by cutting condition compare with others. Owing to this problem, it is necessary to select suitable tool and holder in the deep pocket machining. In this study, the hydraulic holder for the high speed machining is introduced and the performance of that is compared with others according to cutting conditions. The cutting parameters involved were; slenderness ratio in the range of 3 to 6 (L/D), radial depth of cut from 0.01 to 0.05 mm. Cutting force and surface roughness, precision of form were observed during the experiment to investigate cutting state.

• 해양환경안전학회지
• /
• 제20권2호
• /
• pp.172-178
• /
• 2014

본 연구에서는 울산항 E 집단정박지를 이용하는 대표적인 8척의 선박에 대한 단묘박 상태에서의 묘박안전성을 앵커와 앵커체인의 파주력과 바람, 파랑 및 조류에 따른 외력으로 상호 비교하여 평가하고, 주묘 발생이 가능한 최소 한계 외력을 분석하고자한다. 파주력은 해저저질과 실제 앵커 의장수를 반영했고, 선체에 작용하는 외력은 만재와 경하상태별로 풍압면적과 수면하부 침하면적을 조사하여 각 상태별로 선체에 작용하는 풍압력, 유압력 및 파랑 표류력을 산출하였다. 단묘박 상태에서의 주묘 한계 외력에 대한 분석 결과 선박의 종류, 규모 및 적재 상태별로 다소 차이는 있으나 조류 2 knots 조건 하에서 일반화물선은 풍속 15 m/s 이상, 유류운반선은 풍속 13 m/s 이상이면 주묘가 발생할 수 있음이 확인되었다.