• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.1
• /
• pp.55-64
• /
• 2002

Due to the friction characteristics of cylinders and the rail of a passenger car, in the system actuated with hydraulic systems, there exist dead zones, which can not be controlled by a PID controller. In this paper, the friction characteristics of a cylinder is examined, which may cause the abrupt increase of the acceleration in the zero-crossing speed region. To overcome the drawbacks of a PID controlled hydraulic system, a zooming fuzzy logic controller is designed and finally an improved hybrid controller is Proposed. The proposed controller is composed of the PID controller and the zooming fuzzy controller. The effectiveness of the proposed control scheme is shown by simulation and experimental results, In which the proposed hybrid control method yields good control performance not only in the zero-crossing speed region but also In the overall control region including steady-state region.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04b
• /
• pp.289-292
• /
• 1995

근래에 서보 제어용 엑투에에터의 사용 경향은, 전기 서보 모터 및 그 제어 기술의 발전으로, 중간 용량이내의 제어 시스템 분야에서 전기 서보 모터를 사용한 시스템의 채용이 급증하고 있는 추세이다. 본 연구에서는 고유 진동수 밍 댐핑이 적은 유압 서보 시스템에 소프트웨어적인 방법으로 부하 압력 또는 가속도를 궤환시키는 방법을 적용하여 시 스템의 bandwidth를 유압 시스템의 고유 진동수 영역까지 확대 시키고, 응답 특성의 신뢰성을 증가시키기 위해 직렬 제어기가 없을 경우에는 적용이 어려운 강인 제어기 (robust controller)를 압력 또는 가속도 궤환제어기의 앞 부 분에 직렬로 배치하여 실험을 통하여 그 성능을 관찰한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.112-112
• /
• 2003

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1033-1034
• /
• 2011

공작기계에 유압동력을 공급하는 유압동력발생장치의 신뢰성은 공작기계 전체의 신뢰성과 밀접한 관계를 가진다. 전기모터에 의해 유량을 직접제어하는 유압펌프의 시제품에 대한 신뢰성을 평가하기 위해서 성능시험, 내환경시험, 그리고 수명내구시험을 실시할 필요가 있다. 본 연구에서는 2단계 품질기능 전개를 통해 전기모터에 의한 직접유량 제어방식 유압펌프의 신뢰성평가 시험항목을 결정하였다. 시험항목에는 전기모터에 대한 항목, 유압펌프에 대한 항목, 하우징 및 냉각시스템에 대한 항목이 포함되어 있다. 신뢰성평가 시험 항목 중, 가장 큰 비중을 차지하는 수명내구시험에 대해 무고장수명시험을 산출하고, 시험소요시간 단축을 위한 가속모델을 제안하고, 실제 구동 조건을 적용하여 가속수명시험시간을 산출하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.614-619
• /
• 1997

The hydraulic pressure pulsation has on the effected on the acoustic nosie and control performance of the hydraulic-servo system. The Helmholtz attenuator introduction on the hydraulic line is an efficient device to reduce the hydraulic pulsation. The salient feature of causing hydraulic pulsation and the frequency characteristics of Helmholtz attenuator are studied. The hydraulic filter design parameters such as the locating position, connecting orifice area and accumulator volume are mathematically analyzed. The instrumental works are carried out with the remarkable reduction of the hydraulic pressure pulsation magnitude and the acoustic noise level.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.07a
• /
• pp.66-71
• /
• 2002

파워시프트는 동력전달의 단속 없이 변속할 수 있는 변속 방식이다. 기어는 동기 물림식으로 되어 있으며, 유압 클러치를 통하여 주행 중에도 동력의 흐름을 제어할 수 있다. 주요 구성 요소는 동력 흐름을 제어할 수 있는 유압 클러치와 동력을 전달하는 기어 조합이며, 유압 클러치는 피스톤, 리턴 스프링, 디스크, 플레이트 등으로 구성되어 있다. 접속 시에는 유압 피스톤이 리턴 스프링을 압축하며 전진하여 플레이트와 디스크에 수직력을 가하고 이를 결합시켜 동력을 전달한다. 해제 시에는 리턴 스프링에 의하여 피스톤이 후퇴하고 동력이 차단된다. 이때 유압 제어 시스템은 최대 견인 부하에서도 변속을 원활하게 하기 위하여, 클러치 압력을 이용해 변속 중 작동 클러치의 토크를 정교하게 제어한다. (중략)

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.10
• /
• pp.837-843
• /
• 2016

This paper presents a position control strategy for a pump-controlled electro-hydrostatic actuator (EHA) using feedforward control with disturbance compensation. As the disturbance observer is used to estimate nonlinear dynamics of EHA, which has valve-opening conditionals, as well as external disturbances, an additional feedforward control is adopted to achieve rapid response. The effectiveness of the proposed control strategy is verified through experiment using an EHA test bench. The proposed controller shows better tracking performance compared with a conventional PID controller.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2010.05a
• /
• pp.33-36
• /
• 2010

The attention in construction Automation is getting higher since it could be the answer to the lack of skilled labor by decrease in construction population and aging which adversely affects productivity and quality in the construction site. We are on the way to develop a construction automation system adequate for domestic circumstances in Korea; it is called RCA(Robotic-crane based Construction Automation)system. Climbing hydraulic robots system is a part of RCA system and makes Construction factory(CF) climb through the guide rail on the core wall. The safety of climbing hydraulic robots system is at issue due to the overloaded weight of CF. Preventing this issue, present study did the design verification through the structural analysis and the simulation. Mock-up test also was done to analyze the drive performance of climbing hydraulic robots system.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1936-1941
• /
• 2003

Characteristics of the high frequency and pulsatile flow investigated experimentally to understand the flow phenomena in the hydraulic system. In the study, I axis fatigue tester which are widely used for automobile filed are selected. 4 Pressure transducer, amplifier, A/D convertor are used to analyse and to obtain the pulsatle pressure waveform with high frequencies in hydraulic system. Matlab are used. to analyse the characteristics of frequency. Variation of pump input pressure and actuator acceleration frequency, pressure wave are measured with or without accumulators. For with accumulator, frequency amplitude of pressure are very lower than those of without accumulator due to absorbing function of accumulator. As the actuator acceleration frequency increased, effect of accumulator are very important to decrease the pulsatile pressure waveform with high frequencies.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.405-410
• /
• 1999

Hydraulic pipeline between servo valve and actuator affect the dynamic characteristics of electrohydraulic servo systems in serveral ways. This paper deal with the speed control of oil hydraulic gear motor using electrohydraulic servo valve. The frequency and transient response of electrohydraulic servo valve coupled to a gear motor is anlayzed. In particular, the effect of short and long hydraulic pipelines between servo valve and gear motor is investigated. The dynamic characteristics of the speed control systems of gear motor with short pipeline is first described via frequency response experiments with small signal linearized analysis. Loner pipeline is applied distributed parameter pipeline model with consideration of frequency dependent viscous friction.