• Journal of Drive and Control
• /
• v.14 no.3
• /
• pp.50-57
• /
• 2017

Recently, methods of verification for electro-hydraulic servo controllers are various and the required number of testing controllers is continuously increasing in some specific systems. In this study, a PCB-based electronic simulator of hydraulic actuators is designed and developed to simplify test set-up for controllers and to facilitate alteration for characteristics of the simulator. Several features to reduce required time and manpower for verifying controllers are described. Especially, the simulator is considerably efficient to examine some controllers for different hydraulic actuators in a test. Response characteristics of the simulator are compared with those of real actuators to demonstrate validity of this method. Results reveal utilizing the designed simulator for inspecting controllers is equally effective as using hydraulic actuators.

• Proceedings of the KOSOMBE Conference
• /
• v.1995 no.05
• /
• pp.78-81
• /
• 1995

본 연구에서는 슬라이딩 모드를 전기유압식 심실보조기의 직류모터제어기의 속도와 위치제어에 적용하였다. 슬라이딩 모드 컨트롤은 가변구조시스템(varaiable sturucture system)의 일종으로 적절한 내부스위칭 논리를 갖는 연속적인 부시스템(subsystem)의 모임으로 구성된다는 접에서 고정된 제어구조를 갖는 일반적인 제어시스템과 다르다. 이 시스템은 불연속적인 동적시스템이나 시변적인 요소를 갖는 시스템등에서 사용되고 있다. 이 논문에서는 슬라이딩 모드 제어를 적용하여 좌심실보조기를 제어하는 경우에 넓은 작동범위에서도 시스템이 안정적이며 혈류역학적인 외란에 대해서도 기준입력에 대한 속도의 추종이 잘 이루어지는지의 여부를 실제의 구현에 앞서 컴퓨터모델을 통해 검증하고 문제점들을 조사하였다.

• Journal of Drive and Control
• /
• v.18 no.4
• /
• pp.52-58
• /
• 2021

The variable structure controller is designed such that in sliding mode, the system moves along the switching plane in the vicinity of the switching plane, thus it is robust because it is not affected by the parameter fluctuations of the plant. However, a controller based on a variable structure may not meet the desired performance when it is commanded to track any input or is exposed to disturbances. This study proposes a sliding mode controller that follows the IVSC (Integral Variable Structure Control) approach with ELO (Extended Luenberger observer) to solve this problem. The proposed sliding mode control is applied to the velocity control of the hydraulic motor. The sliding plane was determined by the pole placement, and the control input was designed to ensure the existence of the sliding mode. The feasibility of modeling and controller are reviewed by comparing with conventional proportional-integral control through computer simulation using MATLAB software and experimenting on the cases of significant plant parameter fluctuations and disturbances.