• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.7
• /
• pp.665-671
• /
• 2015

The performance of fault diagnostics for a planetary gearbox depends on vibration modulation characteristics, which can vary with manufacturing & assembly tolerance, and load condition. In this paper, a fault diagnostics technique that considers vibration modulation characteristics is proposed for the effective fault detection of planetary gearboxes in wind turbines. For identifying the vibration modulation characteristics in practice, re-sampled vibration signals are processed with narrow band-pass filters. Thereafter, the optimal position of the vibration extraction window is identified for effective detection of faulty signals under the varying vibration modulation characteristics. The proposed diagnostics technique makes it possible to perform robust diagnostics of the planetary gearbox with regard to the changeable vibration modulation effect. For demonstrating the proposed fault diagnostics technique, a 2-kW WT testbed is designed with two DC motors and gearboxes. A faulty gear with partial tooth breakage is machined and assembled into the gearbox.

• The Journal of the Korean bone and joint tumor society
• /
• v.12 no.1
• /
• pp.47-51
• /
• 2006

Osteofibrous dysplasia is a rare bone tumor arising in patient younger than 10 years. Because of the frequent local recurrences after intralesional curettage and even after wide extraperiosteal resection, it is difficult to treat. Recurred lesions often showed increased disease activities. We experienced a case of osteofibrous dysplasia arisen in tibia. We treated the recurrent lesion occurred after two times of curettages and bone grafts with wide extraperiosteal segmental resection and reconstruction with free vascularized fibular graft. Here we report the case with review of the related literatures.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.2
• /
• pp.244-251
• /
• 2011

Pipe rolling process using the planetary rolling mill for AISI 304 stainless steel has been studied by using finite element method. Mannesmann method using three-roll is applied to this rolling process. Commonly, rolling process has started from the cold working and finished to the hot working. This rolling process has more advantage that make reduction of process and cost than existing extrusion process. This process includes various and complex process parameters. Each of the process parameters affects forming result. Therefore, all of the process parameters should be considered in FEA. In this study, possibility and productivity of forming pipe for AISI 304 stainless steel had been investigated. Also, preheating process and variations of rotation velocity and product thickness were considered in FEA. Rolling process for AISI 304 stainless steel pipe was successfully simulated and it should be useful to determine optimal rolling condition.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.62-67
• /
• 2019

We studied the effect of several sex-related steroid hormones (serotonin, progesterone and ${\beta}$-estradiol) for 6 days on the induction of sexual reproduction for the mass production of resting eggs in the marine rotifer Brachionus rotundiformis. The highest mix rate of 20.6% appeared with the ${\beta}$-estradiol ($E_2$) treatment on the third day. The number of resting eggs was highest with $E_2$ treatment, followed by that of the serotonin treatment group. In addition, we investigated the effect of the hormones on the expression pattern of the genes related to sexual reproduction in the rotifer. NrbP, SRY, Cyclin and MrpmB genes were up-regulated with all the hormone treatments. As a result, ${\beta}$-estradiol was more effective than the other hormone treatments to produce resting eggs in B. rotundiformis. We suggest that the sexual reproduction-related genes in the rotifer are the NrbP, SRY, Cyclin and MrpmB genes. Further study is required to determine the optimum concentration of $E_2$ for the effective production of resting eggs in the rotifer.

• Journal of the Korean Institute of Gas
• /
• v.26 no.2
• /
• pp.9-13
• /
• 2022

Electric wheelchairs, the output from the motor is mainly applied to a speed reducer using a power transmission device such as a belt or a chain. However, although a speed reducer using a belt or chain is a simple device, it occupies a lot of space and has a space limitation, so it is not suitable for an electric wheelchair driving part. However, since the speed reducer of the planetary gear type is decelerated on the same axis, the volume can be reduced, so the space constraint is less than that of the belt or chain type reducer. Therefore, in this study, a driving part that can obtain great propulsion with a speed reducer using a planetary gear type was developed through a study on the driving part of a wheelchair that can be switched between manual and electric. Accordingly, the tooth shape of the planetary gear applied to the reducer was designed using the Kisssoft program. In addition, the drive part was designed to be applicable to the existing wheelchair wheels, and the mechanism was optimized for the manual/electric switching principle and operation principle of the drive part. Based on the research contents, the final design and manufacture of the wheelchair reducer drive unit in the form of a planetary gear having one sun gear, two planetary gears and one ring gear was carried out.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.1
• /
• pp.198-205
• /
• 1998

In this paper, the dynamic characteristics of a star type epicyclic gear train have been analyzed. Nonlinear stiffness of a gear pair were obtained considering the bending and shear deformation, Hertz contact deformation, as well as tooth fillet deformation. Nonlinear stiffness coefficients and damping coefficients around the static equilibrium position were obtained by perturbation method. The loci of the planet gears and sun gear were estimated. Tooth meshing forces and bearing reaction forces were calculated. The effects of bearing clearance and oil viscosity on the gear behavior were also analyzed.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2004.10a
• /
• pp.201-204
• /
• 2004

감속기가 사용되어지는 경우 부하의 변동이나 구동부의 상태변화에 따라 모터의 토크, 회전수 등이 변하는데 이러한 값들을 모니터링 하면 부하의 변동이나 구동부를 진단할 수 있다. 본 논문은 유성기어를 이용한 기어드 모터를 제작하고, LCD를 포함하는 간단한 사용자 인터페이스를 통해 전달 Torque, 전달회전수(rpm), 전달동력을 확인할 수 있는 소형의 표시기가 있는 감속기에 관한 것이다. 일반적으로 전달 토크를 측정하는 장비는 크기가 크고 고가이며 계측기를 연결하고 측정하는 과정이 매우 번거로울 뿐만 아니라 지속적인 유지보수가 필요한 단점이 있다. 본 논문에서 제안하는 유성기어를 사용하면 간단히 모터의 토크 및 회전수를 측정할 수 있고 측정값을 표시하는 표시기를 모터에 부착할 수 있다. 측정 및 표시기는 기존 가격에 비해 매우 값싸게 제작할 수 있고 유지보수가 필요 없으며 검출 값을 시스템 제어부에 피드백 시키면 자기진단이 가능해진다. 특히 블루투스를 이용한 무선 통신기능을 부과하면 원격 모니터링이 가능하고 복수 모터유닛의 네트워크 구성이 용이하며 인터넷을 통한 데이터 통신으로의 확장이 가능하다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.40-43
• /
• 1999

본 연구에서는 고립단어 인식시스템에 사용되고 있는 DTW(DynamicTimeWarping) 알고리즘의 계산량을 줄일 수 있는 방법을 제안한다. 일반적으로 고립단어 인식시 가장 인식률이 좋은 알고리즘은 DW라고 알려져 있으나, 인식대상어휘가 늘어나면 계산량이 비례해서 늘어나고 인식률이 저하되는 단점이 있으므로 일반적으로 200단어 이하의 어휘에만 사용되고 있다. 따라서 대상어휘를 감소시켜 계산량을 줄이기 위해 본 논문에서는 유성/무성/묵음 (V/U/S) 정보를 이용하여 코드워드를 구성하고 같은 코드워드에 해당되는 단어들을 추출해이들 만을 비교대상 어휘로 제한하므로서 DW 알고리즘을 적용할 대상 어휘수를 줄이는 방법을 사용하여 계산 속도를 향상시켰다 또한 입력 단어와 대상 단어와의 누적거리 계산 시 끝점 정보 뿐 만 아니라 유성/무성/묵음 경계 정보를 이용하여 piecewise DTW를 구현함으로서 탐색 영역을 축소함으로써 추가적인 계산량 감소가 가능하다. 따라서 상기 기법들을 이용하면 PC상에서도 DTW를 이용한 대어휘 고립단어 음성 인식기의 구현이 가능할 것이다.

• 종축개량
• /
• v.21 no.2
• /
• pp.61-68
• /
• 1999

• Korean Journal of Plant Resources
• /
• v.9 no.3
• /
• pp.279-284
• /
• 1996

Effects of varieties and cutting lengths of Chinense Martrimony Vine on the growth characteristics and the yield of green shoot were investigated in order to obtain the basic data The Yuseong-2 was observed higher in the number of green shoot per plant, of green shoot, but smaller in the length and the width of leaves than those of Cheongyang native. The number of green shoot was decreased in longer cutting length, but the other growth characteristics were increased. The dry weight of green shoot was $1.01{\sim}0.03g$ and the ratio of stem to leaf in green shoot was higher in leaf than that of stem, and the ratio was 46 : 54. The dry yield of green shoot was $108{\sim}204kg/10a$ in Cheongyang native and $215{\sim}363kg/10a$ Yuseong-2 and the dry yield of green shoot of Yuseong-2 may be expected in this planting year. Each growth characteristic of varieties was highly positive correlation with the yield except the number of green shoot of Cheongyang native. The number of green shoot of Yuseong-2 was nagative correlation with each growth characteristic and the yield except the number of total leaves per plant.