• Korean Journal of Optics and Photonics
• /
• v.33 no.6
• /
• pp.287-294
• /
• 2022

This study presents a method for designing an athermal middle wavelength infrared (MWIR) zoom lens with the iterative selection of material compositions on an athermal glass map. The optical properties of glass for MWIR are generally very sensitive to temperature, compared with visible glass. To compensate for focus error due to temperature change, the non-athermalized zoom system requires a large amount of movement of a compensator, which results in an unstable zoom system. To solve this problem, the material compositions for an athermal zoom lens have effectively been obtained using the thermal aberration correction process analytically on an athermal glass map. An expander lens is used to enlarge the focal lengths of an original main zoom lens two times. Finally, while this expander is attached to an original athermal zoom system, the final zoom system equipped with this expander doubles the focal length ranges and has stable performance over a specified temperature range.

• Journal of the KSME
• /
• v.32 no.8
• /
• pp.666-672
• /
• 1992

유리의 제조공정에 있어서 열적 문제들을 고찰하여 보았다. 비단 유리뿐 아니라, 여러 가지 다른 재료의 공정 (예컨대 철강, 세라믹 등)에 있어서도 다양한 열적 문제가 관찰되며, 이러한 점에서 열공학자들의 관심의 확대가 절실하다고 하겠다. 이 글이 우리 열공학자들의 시야를 넓히는 데 일조를 하였기를 바라마지 않는다.

• Korean Journal of Food Science and Technology
• /
• v.16 no.1
• /
• pp.51-58
• /
• 1984

Grains of naked barley (Baekdong cultivar) were polished, powdered and subjected to the successive extraction into free and bound liquid fractions. These were further fractionated into lipid classes and quantified by means of thin layer chromatography, column chromatography and gas-liquid chromatography. Contents of free and bound lipids in barley flour were 2.27% and 1.01%, which were decreased to 2.12% and 0.76%, respectively, after purification. Free and bound lipids were consisted of monoglycerides, diglycerides, triglycerides, free sterols, sterol esters, free fatty acids and polar lipids. Major constituents of free lipids were 56.2% triglycerides, 14.9% free fatty acids and 13.4% sterols while those of bound lipids were 73.8% polar lipids, 8.4% free fatty acids and 5.2% triglycerides. The content of non-polar lipids in free lipids was 93.6% as compared with 26.2% in bound lipids. However, phospholipids content in bound lipids was 55.5% as compared with 2.5% in free lipids, and glycolipids content in bound lipids was 19.4% as compared with 3.9% in free lipids. Major fatty acids in the free and bound lipid fractions were linoleic acid 52.1%, 54.8%, palmitic acid 24.8%, 30.0% and oleic acid 15.6%, 8.8%, respectively, showing similar patterns in both fractions. The amount of unsaturated fatty acids in free lipids was 72.8% as compared with 68.0% in bound lipids. In comparing the fatty acid composition of non-polar lipids, glycolipids and phospholipids, no difference was observed between free and bound lipid fractions while a slight difference was found among the lipid constituents.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.33.2-33.2
• /
• 2011

고온형 SOFC의 개발에 있어 스택의 신뢰성을 확보하는데 가장 중요한 핵심기술은 스택 구성요소 사이를 접합하는데 필요한 고온형 밀봉재의 개발이다. SOFC 스택에서의 밀봉재는 고체전해질과 접속자 사이에서 음극에 공급되는 연료가스와 양극에 공급되는 공기가 서로 혼합되는 것을 방지하는 역할은 물론 기계적으로 취약한 단전지의 보호 및 스택전체 구조물의 구조적 일체성(Structural integrity)을 부여하는데 주목적이 있다. 현재 기체 기밀성을 유지하기 위한 밀봉재는 크게 유리 및 결정화 유리계, mica및 mica/유리복합재료, 유리/충전재 복합재료 등이 사용되고 있으나 다수의 단위전지로 구성되는 스택 구성에서 스택의 열기계적 안정성 및 장기수명을 보장하기 위해서는 본 연구에서 개발하고자 하는 복합밀봉재가 가장 적합할 것으로 예상되고 있다. 본 연구에서는 $SiO_2-B_2O_3-RO$계에 BaO, SrO를 일정비율로 첨가하여 제작된 유리 frit을 열처리하여 물리화학적 물성변화를 검토하였으며, $700^{\circ}C$ 이하의 연화점을 갖는 유리를 기지상으로 하고 세라믹 보강재를 첨가한 고온형 복합밀봉재를 개발하고 그 물리화학적 안정성, 열기계적 안정성 및 밀봉 특성을 평가하였다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.95.2-95.2
• /
• 2012

고온형 SOFC의 개발에 있어 스택의 신뢰성을 확보하는데 가장 중요한 핵심기술은 스택 구성요소 사이를 접합하는데 필요한 고온형 밀봉재의 개발이다. SOFC 스택에서의 밀봉재는 고체전해질과 접속자 사이에서 음극에 공급되는 연료가스와 양극에 공급되는 공기가 서로 혼합되는 것을 방지하는 역할은 물론 기계적으로 취약한 단전지의 보호 및 스택전체 구조물의 구조적 일체성(Structural integrity)을 부여하는데 주목적이 있다. 현재 기체 기밀성을 유지하기 위한 밀봉재는 크게 유리 및 결정화 유리계, mica및 mica/유리복합재료, 유리/충전재 복합재료 등이 사용되고 있으나 다수의 단위전지로 구성되는 스택 구성에서 스택의 열기계적 안정성 및 장기수명을 보장하기 위해서는 본 연구에서 개발하고자 하는 복합밀봉재가 가장 적합할 것으로 예상되고 있다. 본 연구에서는 SiO-B2O3-RO계에 BaO, SrO를 일정비율로 첨가하여 제작된 유리 frit을 열처리하여 물리화학적 물성변화를 검토하였으며, $750^{\circ}C$ 이하의 연화점을 갖는 유리를 기지상으로 하고 세라믹 보강재를 첨가한 고온형 복합밀봉재를 개발하고 그 물리화학적 안정성, 열기계적 안정성 및 밀봉 특성을 평가하였다.

• 재활용회보
• /
• s.3
• /
• pp.40-44
• /
• 2004

폐기물의 양이 급격히 증가하고 있는 현재, 국내는 물론이고 전 세계적으로 자원의 고갈에 대한 심각성을 인식하고 폐기물을 재활용하여 가능자원으로 만들기 위한 방법을 모색하고 연구하는 등 미래자원을 확보하기 위한 노력을 꾸준히 하고 있다. 하지만, 폐철, 폐지, 폐플라스틱, 폐유, 폐타이어 등의 폐기물에 대해서는 많은 관심을 가지고 재활용 기술을 연구하는 등 그 중요성에 대해 인식하고 있는 반면, 유리제품의 재활용에 대해서는 그 중요성이 인식되지 못했다. 그래서 월간 ‘재활용’지에서는 폐유리병 재활용 현황, 기술 등에 관한 특집기사와 더불어 유리제품 재활용에 대한 인식을 고취시키기 위해 현장의 목소리를 듣고자 유리재생원료(cullet)를 생산하는 쎄로라인을 찾아 업체탐장 코너에 소개한다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.105.1-105.1
• /
• 2010

바이오디젤 보급 활성화에 따른 식물성 원료유의 가격 상승 및 수급 불안정성 문제를 해결하고자 폐유지를 원료로 바이오디젤을 생산하고자 하는 시도가 이루어지고 있다. 폐유지의 사용은 폐자원 활용 측면에서 의미가 있으며 바이오디젤 생산 단가를 낮출 수 있다. 다양한 폐유지가 산업체로부터 배출되며 이 중에서 dark oil은 식용유 공장에서 식물성 원료유의 정제 과정에서 생기는 부산물로 바이오디젤로 전환 가능한 성분을 포함하고 있다. 본 연구에 사용된 dark oil은 54.9%의 유리지방산과 28.0%의 triglyceride, 4.4%의 diglyceride, 그리고 1% 이하의 monoglyceride를 함유하고 있다. Dark oil의 초기 산가는 109.8 mg KOH/g이었다. 본 연구에서는 dark oil의 유지 부분(triglyceride, diglyceride, monoglyceride)을 유리지방산으로 전환시켜 HAAO(high acid acid oil)을 생산한 후, 고체 산 촉매에 의한 에스테르화 반응을 통하여 바이오디젤을 생산하고자 하였다. 유지 부분의 유리지방산 전환 반응을 위하여 음이온성 계면활성제인 SDBS(sodium dodecyl benzene sulfonate)가 사용되었다. Dark oil:황산:물의 질량비가 10:2:10이고 SDBS가 오일 대비 3%인 조건에서 dark oil의 산가는 190.8 mg KOH/g까지 증가하였고, dark oil:황산:물의 질량비가 10:4:10이고 SDBS가 2%인 조건에서는 산가가 194.2 mg KOH/g까지 증가하였다. 생산된 HAAO을 이용하여 오일 대비 30%의 Amberlyst-15 촉매 하에서 HAAO:메탄올 몰비 1:9인 조건에서 에스테르화 반응을 수행하였을 경우 FAME(fatty acid methyl ester) 함량은 81.3%까지 증가하였다. 고체 산 촉매로써 Amberlyst-15와 가격 면에서 저렴한 PC101을 비교하였을 경우 FAME 함량은 각각 80.7%, 77.9%로 비슷한 효율을 나타내었다. 생산된 바이오디젤의 FAME 함량을 높이기 위해 증류 공정을 필요로 하였다.

• Applied Biological Chemistry
• /
• v.29 no.4
• /
• pp.346-351
• /
• 1986

This study was carried out to investigate the changes in bound, free, and neutral lipid components of malt during malting, two-rowed barley. During malting, the temperature and relative humidity were $17^{\circ}C$ and 80%, respectively. The content of free lipids in both two-rowed barley and their malt was much higher than that of bound lipids. Decrease in the content of free lipids during malting was more prominent than that of bound lipids. The content of neutral lipids was 21.0mg/g-d. w. out of 27.9mg/g-d. w. of total lipids extracted from two-rowed barley. The content of neutral lipids decreased during malting. Triglyceride, free fatty acid and sterol ester were the principal components of neutral lipids. The content of triglyceride decreased during malting, but the content of free fatty acid and sterol ester increased. Linoleic, palmitic, oleic and linolenic acid were the principal fatty acid of free and bound lipids. The content of palmitic acid in free lipids increased during malting, but that of bound lipids decreased. The content of oleic acid in free lipids decreased. The principal fatty acids of neutral lipids were similar to those of free lipids. The content of palmitic acid increased during malting, but that of linoleic and stearic acid decreased.

• The Korean Journal of Pesticide Science
• /
• v.19 no.3
• /
• pp.230-240
• /
• 2015

An IOM sampler equipped with glass fiber filter has been recently utilized instead of solid adsorbent, which was used to measure the inhalation exposure of agricultural operator to pesticides. The aim of this study is to validate the efficacy of an IOM sampler by measuring the trapping efficiency and breakthrough using kresoxim-methyl water-dispersible granule and fenthion emulsifiable concentrate. On LC-MS/ MS, minimum detection level was 12.5 pg and method limit of detection was 5.0 ng/mL. Good linearity ($R^2$ > 0.999) for matrix matched standards was obtained. Recoveries of pesticides from glass fiber filter were 102-109% (kresoxim-methyl) and 97-104% (fenthion) while those from XAD-2 resin were 94-98% (kresoxim methyl) and 93-100% (fenthion). Trapping efficiency test was performed with personal air pumps and IOM sampler (glass fiber filter) connected with solid adsorbent (XAD-2 resin) with two types of formulation (solid and liquid) which were diluted by standard rate and sprayed to IOM sampler. Those pesticides were trapped only in glass fiber filter without any breakthrough to solid adsorbent. After spiking of pesticides to glass fiber filter, breakthrough test was carried out with IOM sampler (glass fiber filter) which was connected with solid adsorbent. As a results, 87-101% of kresoxim-methyl and 96-105% of fenthion remained in spiked glass fiber filter, however, no pesticides were detected in second glass fiber filter and solid adsorbent. In conclusion, IOM sampler which equipped with glass fiber filter can be applied widely for pesticide inhalation exposure study since it has good trapping efficiency and adsorption capacity, regardless of the solid or liquid formulation.

• Korean Journal of Heritage: History & Science
• /
• v.41 no.1
• /
• pp.5-19
• /
• 2008

Thirty six samples of Western asia glass vessel shards which were excavated from South Mound of Hwangnamdaechong were each measured for thickness, pore size and specific gravity and analyzed for ten major compositions and thirteen trace elements. The glass samples with colorless, greenish blue and dark purple blue were well classified by principal component analysis(PCA). All glass shards of Hwangnamdaechong belonged to Soda glass system ($Na_2O-CaO-SiO_2$) which have the range of 14~17% $Na_2O$ and 5~6% CaO. The corelation coefficients of (MgO, $K_2O$) and (MnO, CuO) showed above 0.90. The concentrations of thirteen trace elements apparently differentiated from colorless, greenish blue and dark blue glasses. We found that thirteen trace elements were very important indices for studying raw material of glass and the origin of glass making. Colorless glass : The specific gravity is $1.50{\pm}0.04$. Circle or oval circle pores are observed with regular direction in internal zone and the longest one is about 0.35 mm. The raw material of sodium must be the plant ash because sodium glasses contain HCLA(High CaO, Low $Al_2O_3$) and HMK(high MgO, high $K_2O$) and suggested to Sasanian glass. The total amount of coloring agent of colorless glass is below 1 % which is too small to attribute to the color. Greenish blue glass : The specific gravity is $1.58{\pm}0.04$. The fine pores which are 0.1~0.2mm are dispersed in internal zone. Sodium glasses are distributed to HCLA and HMK. Therefore the greenish blue glass also have used plant ash for raw material of sodium with the same as colorless glass. It was also suggested to the glass of Sasanian. The total amount of coloring agent of greenish blue glass is about 4% under the influence of working MnO, $Fe_2O_3$ and CuO. Dark purple blue glass : The specific gravity is $1.48{\pm}0.19$. There are rarely pores in internal zone. They are distributed to HCLA and LMK(Low MgO, Low $K_2O$) and suggested to Roman glass. The raw material of sodium is estimated to natron. The total amount of coloring agents of greenish blue is about 3% by $Fe_2O_3$ and CuO. These studies for western asia glass shards from South Mound of Hwangnamdaechong could be used in the future as the standard data which could be compared with those of other several graves in Korea and dispersed in foreign areas.