• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.1
• /
• pp.115-119
• /
• 2005

As the regulations on DBPs are tightened, many water treatment plants (WTPs) in Korea have already introduced or will introduce enhanced coagulation, alternative disinfectants and advanced treatments such as ozonization and granular activated carbon to improve drinking water qualify. After a phenol leakage accident at the Nakdong-River in 1991, 26 WIPs in Korea introduced carbon dioxide generators, but there has been no accumulation of significant operating data. This research summarizes things that should be considered for the introduction of carbon dioxide disinfection process to WTPs based on one year operation data from A WTP that has had high concentration of DBP during a specific period in the summer. The removal efficiency of DBP was $30{\sim}40%$, but those of 2-MIB, Geosmin were less than 10%. The generation rate of $ClO_2$ by-products such as chlorite and chlorate were $70{\sim}100%$ of input dosage, but the ratios increased over time. At the same time, strong chlorine odors may be produced in the distribution system when $ClO_2$ was used with $Cl_2$ as a result of reaction between the chlorite and residual chlorine.

• Journal of the Korea Concrete Institute
• /
• v.15 no.6
• /
• pp.829-839
• /
• 2003

Recently, the corrosion of reinforced concrete structures has received great attention related with the deterioration of sea-side structures, such as new airport, bridges, and nuclear power plants. In this regards, many studies have been done on the chloride attack in concrete structures. However, those studies were confined mostly to the single deterioration due to chloride only, although actual environment is rather of combined type. The purpose of the present study is, therefore, to explore the influences of carbonation to chloride attack in concrete structures. The test results indicate that the chloride penetration is more pronounced than the case of single chloride attack when the carbonation process is combined with the chloride attack. It is supposed that the chloride ion concentration of carbonation region is higher than the sound region because of the separation of fixed salts. Though the use of fly ash pronounces the chloride ion concentration in surface, amounts of chloride ion penetration into deep region decreases with the use of fly ash. The present study allows more realistic assessment of durability for such concrete structures which are subjected to combined attacks of both chlorides and carbonation but the future studies for combined environment will assure the precise assessment.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.5
• /
• pp.580-587
• /
• 2004

The objective of this research is to investigate the electrochemical oxidation process for nitrogen removal in wastewater involving chloride ion and nitrogen compounds. The process experiment of electrochemical oxidation was conducted by using the stainless steel tube type reactor and the $Ti/IrO_2$ as anode. Free chlorine production and current efficiency variation for total nitrogen removal was compared depending on whether electrolyte is added, and the nitrogen type distribution under an operating condition. When chloride was added as electrolyte, it was found that production of free chlorine increased and the concentration of the chloride decreased as retention time passed. The concentration of chloride in influent decreased from 1,660 to 1,198 mg/L at the current density of $6.7A/dm^2$, while concentration of free chlorine increased to 132 mg/L. Current efficiency in removal of ammonium nitrogen was increased when chloride was dosed as electrolyte. It was observed that ammonium nitrogen was oxidized to nitrite and nitrate through electrochemical oxidation and that the concentration of total nitrogen in influent was reduced from 22.58 to 4.00 mg/L at the short retention time of 168 seconds through the electrochemical oxidation of nitrogen.

• Clinical and Experimental Pediatrics
• /
• v.45 no.3
• /
• pp.413-417
• /
• 2002

Gitelman's syndrome is an autosomal recessive disorder characterized by hypokalemic metabolic alkalosis, hypomagnesemia, and hypocalciuria that has recently been reported to be linked to thiazide- sensitive Na-Cl cotransporter gene mutation. In this study, we performed renal clearance studies to differentiate Gitelman's from Bartter's syndrome and to confirm the diagnosis in two patients clinically diagnosed with Gitelman's syndrome. Each patient was hydrated by 20 mL/kg body weight of oral water within 30 minutes, which was followed by intravenous half saline. When urinary flow reached 10 mL/min, samples of urine and serum were obtained to calculate the osmolar clearance, free water clearance, chloride clearance, and distal fractional chloride reabsorption. Subsequently, furosemide or hydrochlorothiazide was administered. Samples were collected and the same parameters were calculated. In our patients, chloride clearance was increased more than 10 times after furosemide administration(2.1 : 25.7 and 2.2 : 27.4 mL/min/100 mL GFR), but not increased after hydrochlorothiazide treatment(2.1 : 1.6 and 2.2 : 2.6 mL/min/100 mL GFR). And the distal fractional chloride reabsorption was significantly decreased by furosemide injection (73% : 15% and 75% : 4.6%), whereas hydrochlorothiazide had no effect on it(73% : 63% and 75% : 78%). These findings indicate that our patients have a defect in thiazide-sensitive Na-Cl cotransporter in the distal tubule, which is compatible with the pathophysiology of Gitelman's syndrome.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.11
• /
• pp.715-719
• /
• 2012

We investigated the effects of electrochemical characteristics and generation of chlorine by the different amount of Ru coating which was prepared for $RuO_2$/Ti electrode coated with 1.5 mg, 2.5 mg, 5.5 mg, 8.5 mg Ru per unit area ($cm^2$). As a Result of the cycle voltammetry experiments, chlorine overvoltage of Ru-coated electrodes showed to be the nearly sustained value of approximately 1.15V (vs. Ag/AgCl). By contrary, According to the results of the AC impedance spectroscopy and potentiodynamic polarization tests, the amount of Ru per unit area ($cm^2$) included 2.5 mg, 3.5 mg as $RuO_2$/Ti offered the highest levels of durability which was electrode resistance and corrosion rate appeared to be $0.4582{\Omega}$, $0.5267{\Omega}$ and 0.082 mm/yr, 0.058 mm/yr, respectively. It was also observed that generation of chlorine coated with 3.5 mg per unit area ($cm^2$) was the highest value of 15.2 mg/L.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.3
• /
• pp.363-369
• /
• 2005

This paper presents the integrated technique of water quality analysis and Geographic Information System(GIS) for assessing the variation of free chlorine residuals by water temperature and supply distance in Sangri water supply system in Daegu. GIS was utilized for mapping projectmap, extraction of a pipeline route, and supply distance. Free chlorine residual is analyzed every month for appraising the seasonal variation. As a result, free chlorine residuals are affected both water temperature and water supply distance, and it becomes worse as water temperature and water supply distance is increased. To maintain 0.4mg/l of free chlorine residual, initial dose concentration should be over 1.85mg/l in summer.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.10
• /
• pp.916-927
• /
• 2010

In general water treatment process, the disinfection process by chlorine is used to prevent water borne disease and microbial regrowth in water distribution system. Because chlorines were reacted with organic matter, carcinogens such as disinfection by-products (DBPs) were produced in drinking water. Therefore, a suitable injection of chlorine is need to decrease DBPs. Rechlorination in water pipelines or reservoirs are recently increased to secure the residual chlorine in the end of water pipelines. EPANET 2.0 developed by the U.S. Environmental Protection Agency (EPA) is used to compute the optimal chlorine injection in water treatment plant and to predict the dosage of rechlorination into water distribution system. The bulk decay constant ($k_{bulk}$) was drawn by bottle test and the wall decay constant ($k_{wall}$) was derived from using systermatic analysis method for water quality modeling in target region. In order to predict water quality based on hydraulic analysis model, residual chlorine concentration was forecasted in water distribution system. The formation of DBPs such as trihalomethanes (THMs) was verified with chlorine dosage in lab-scale test. The bulk decay constant ($k_{bulk}$) was rapidly decreased with increasing temperature in the early time. In the case of 25 degrees celsius, the bulk decay constant ($k_{bulk}$) decreased over half after 25 hours later. In this study, there were able to calculate about optimal rechlorine dosage and select on profitable sites in the network map.

• Journal of Life Science
• /
• v.16 no.4
• /
• pp.579-583
• /
• 2006

The influence of disinfectant on bacterial concentration and carbon usage patterns by Biolog GN plates were investigated for biofilm on carbon steel pipe. Heterotrophic bacterial concentrations were not different among non-, monochloramine- (1.0, 1.5 mg/l) and free chlorine- (0.5, 1.0 mg/l) treated samples (P = 0.56, ANOVA). However treatment of 1.5 mg/l free chlorine and 2.0 mg/l monochloraime showed significantly lower densities than control (P < 0.01, ANOVA). By the stepwise increasement of disinfectant concentration, the carbon usage activities of biofilm microflora were decreased after increase without the decrease of bacterial concentration, following reduction of cell density. Carbon usage patterns were qualitatively and quantitatively different with similar bacterial concentrations. Principal component analysis suggested that type and concentration of disinfectant were main factors on the usage of carbons. Our result suggest that the differences of bacterial communities were different among the samples and the need of monochloramine for the reduction of biofilm in drinking water.

• Journal of Korean Society of Water and Wastewater
• /
• v.13 no.2
• /
• pp.82-88
• /
• 1999

This study was to evaluate disinfection efficiency of chlorine and chloramine as secondary disinfectants in the distribution systems. Indicator organism, HPC in the suspended and attached were measured for copper, galvanized steel, PVC, and carbon steel pipes. For suspended microorganism, the PVC pipe was markedly dense among the assessed pipe materials. The attached microorganism was markedly equivalent roughness of pipe materials. In copper and galvanized pipes, chloramine was more effective that free chlorine to disinfect suspended microorganism in the contact time of 2 hours. The contact time for the 99% inactivation of suspended microorganism by chloramine was longer than that of free chlorine. Regardless of pipe materials, chloramine was effective on both disinfection efficiency and 99% inactivation time for attached microorganism. In conclusion, chloramine which is good disinfectant for long contact time was recommended as secondary disinfectant in distribution system.

• Proceedings of the Korea Society of Environmental Toocicology Conference
• /
• 2002.10a
• /
• pp.153-153
• /
• 2002

수돗물의 염소소독 과정에서 부식질의 초기 분해생성물인 MX(Mutagen X)는 수돗물의 전체 돌연변이유발성의 최고 60%까지 차지하는 것으로 알려져 있다. 그러나 존재하는 농도는 수 ng/L로 정량분석을 위해서는 resin을 사용하여 10 ~ 20L의 물을 농축하여야 한다. 이 연구에서 MX의 농축에 사용된 resin은 XAD-4와 XAD-7HP의 1:1 mixture이었으며, 사용 전에 Soxhlet extractor를 사용하여 ethyl acetate와 methanol로 각각 12시간씩 세척하였다. 15L의 물 시료는 37%의 염산으로 pH 2에 맞춘 후 직경 2cm의 유리관에 15cm의 높이로 채워진 resin을 40mL/min의 유속으로 통과시켰다. 유리관에 잔류하는 물은 질소가스로 대부분 불어 제거한 후 ethyl acetate 200mL를 가해 1mL/min의 유속으로 흘려주어 MX를 용출시킨 후 회전증발기로 5mL의 부피까지 농축시키고 10% H$_2$SO$_4$ in MeOH 0.1mL를 가하여 6$0^{\circ}C$에서 methyl ester화하였다. 과포화된 $Na_2$SO$_4$ 수용액 0.3ml를 가한 후 MTBE 0.3mL로 추출하고 GC/ECD로 분석하였다. MX의 회수율은 60% 이상이었으며 일부수돗물 시료에 대해 분석하였다.