• Culinary science and hospitality research
• /
• v.22 no.2
• /
• pp.57-65
• /
• 2016

This study aimed to evaluate quality characteristics of soy sauce by various manufacturing methods. We examined color values, contents of saccharide and free amino acid. Regarding color values, brewed soy sauce showed lower level of L-values than traditional soy sauce, and the L-value was increased with time dependent manner in traditional soy sauce. The one year old traditional soy sauce exhibited the lowest a-value whereas the three years old traditional soy sauce showed the highest b-value (+4.27). The content of the bitter and savory taste amino acids was the highest in commercial soy sauce with the values of 28.98% and 18.93%, respectively. In addition, traditional soy sauce contained more GABA than brewed soy sauce.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.275-277
• /
• 2007

유리를 기판으로 하는 superstrate pin 비정질 태양전지에서 전면투명전도막(TCO)과 p-layer의 계면이 태양전지의 효율을 내는데 가장 큰 기여를 한다. 전면투명전도막(TCO)으로 현재 일반적으로 사용되는 ZnO:Al는 $SnO_2:F$ 보다 전기,광학적으로 우수하고, 안개율(Haze)높으며, 수소 플라즈마에서의 안정성이 높은 특정을 갖고 있다. 그래서 박막 태양전지 특성향상에 매우 유리하나, 태양전지로 제조했을 때, $SnO_2:F$보다 충진율(Fill factor:F.F)과 V_{\infty}$ 가 감소한다는 단점을 가지고 있다. 본 실험실에서는 $SnO_2:F$의 F.F가 72%이 나온 반면 ZnO:Al의 F.F은 68%에 그쳤다. 이들 원인을 분석하기 위해 TCO/p-layer의 전기적 특성을 알아 본 결과, $SnO_2:F$보다 ZnO:Al의 직렬저항이 높게 측정되었다. 이러한 결과를 바탕으로 p-layer 에 R={$H_2/SiH_4$}=25로 변화, p ${\mu$}c$-Si:H/p a-SiC:H 로 p-layer 이중 증착, p-layer의 boron doping 농도를 증가시키는 실험을 하였다. 직렬저항이 가장 낮았던 p ${\mu$}c$-Si:H/p a-SiC:H 로 p-layer 이중 증착에서 Voc는 0.95V F.F는 70% 이상이 나왔다. 이들 각 p층의 $E_a$(Activation Energy)를 구해본 결과, ${\mu$}c$-Si:H의 Ea 가 가장 낮은 것을 관찰 할 수 있었다.

• Journal of the Korean Geosynthetics Society
• /
• v.10 no.3
• /
• pp.1-8
• /
• 2011

This paper presents the performance evaluation of asphalt pavement reinforced with fiber sheet type of geosynthetics and observations conducted to evaluate the practical efficiencies and performance of overlay asphalt pavement reinforced with geosynthetics. In this study, performance evaluation were performed for the six section of construction site. The performance indcators of asphalt pavement reinforced with geosynthetics has been collected Automatic Road Analyzer (ARAN), Falling Weight Deflectometer (FWD) and have been analyzed for rutting, cracking ratio, falling weight and international roughness index. As a result of performance evaluations, geosynthetics reinforced asphalt pavement is sigficant effect on increasing a cracking resistance than the non-reinfroced asphalt pavement, also rutting and crak is slowly increase as incerasingly performance period.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.158-158
• /
• 2010

최근 전자산업의 발전은 형상 면에서 경박 단소화로 급속하게 진행되고 있으며, 전자소자 내부에서의 배선재료로 사용되고 있는 알루미늄(Al) 박막의 두께 역시 얇아지고 있다. 극박막 범위에서 박막의 두께 증가에 따라 전기가 잘 흐르기 시작하는 박막의 최소두께로 정의 되는 유착두께를 실시간으로 측정하는 방법을 구현하고 임의의 금속박막과 기판의 조합에 있어서 각각의 재료에 대한 유착두께를 제공함으로써 향후 미세전자소자의 제작 시 배선 재료의 선택에 대한 기초자료를 축적할 수 있다. 또한 박막의 미세구조 변화 관점에서 연구함으로써 여러 가지 금속박막에 대한 유착두께를 줄일 수 있는 방법을 도출할 수 있다. 본 연구에서는 유리 기판 위에 사진 식각 공정으로 패턴을 형성하고 패턴이 형성된 유리 기판은 스퍼터에 연결된 4 point probe에 구리 도선으로 연결한 후 DC 마그네트론 스퍼터법으로 Al, Cr, ITO, Sn을 증착하면서 실시간으로 시간에 따른 면저항을 측정하며 이 때 스퍼터 내부 진공도는 $4.6{\times}10^{-5}$까지 낮춰준 후 각각의 금속에 맞는 진공도를 설정하였다. 20.0 sccm의 Ar가스를 넣고 100 W파워로 플라즈마를 형성시켜 금속을 증착하면서 4-point probe를 이용하여 실시간으로 면저항을 측정했다. 1초 단위로 면저항을 측정한 결과 평균적으로 Al은 71초, Cr은 151초, ITO는 61초, Sn은 20초에 저항이 급격히 감소함을 알 수 있었다. 또한 저항이 급격히 감소한 시점의 박막 두께를 알기 위해Surface profiler로 박막두께를 측정한 결과 1초당 Al은 $4\;{\AA}$, Cr은 $1.7\;{\AA}$, ITO는 $2.7\;{\AA}$, Sn은 $6.7\;{\AA}$ 이었다. 실험적으로 R은 면저항, T는 증착 시간이라 할 때 Y축을 $R{\times}T^3$으로 하고 X축을 T로 설정하고 그래프로 나타내면 Y축 값이 최소값을 갖는 시점이 유착두께임을 확인하였다. 본 연구는 실시간 면저항 측정을 통한 금속박막의 전기전도 특성과 미세구조에 대한 기초자료를 제공함으로써 신기술 발전에 공헌할 것이다.

• Polymer(Korea)
• /
• v.24 no.6
• /
• pp.837-844
• /
• 2000

The cure behavior of commercial epoxy molding compounds (EMC) commonly used for IC package was studied at constant cure temperatures as well as at constant heating rates using differential scanning calorimetry (DSC), rheometer, and dielectric analyzer (DEA). The cure kinetics were obtained using autocatalytic reaction model according to the Ryan Dutta method after assuming m+n equal to 2. The prediction of reaction rates by the model equation corresponded well to experimental data at all temperatures except for 10$0^{\circ}C$. The phase transitions such as gelation and vitrification occurred during network formation. At each isothermal cure temperature, $T_{g}$ was measured in accordance with cure time, and the vitrification point was attained when $T_{g}$ was equal to $T_{cure}$. The temperature dependence of gel points and vitrification points showed good agreement with Arrhenius relation. DEA using parallel plate electrode was effective for the monitoring of EMC cure. we knew that if the resin systems are materials of comparable quality, $_{gel}$$T_{g}$ is constant regardless of accelerator concentration in TTT (Time-Temperature-Transformation) diagram.

• Journal of Nutrition and Health
• /
• v.41 no.3
• /
• pp.199-205
• /
• 2008

The overall purpose of this study was to investigate the effects of level of isoflavones supplementation on bone metabolism in growing female rats. Forty-five rats divided into three groups; Control, l/2IF, and lIF. Serum osteocalcin and alkaline phosphatase (ALP) activity, urinary deoxypyridinoline (DPD) crosslinks value were measured to monitor bone formation and resorption at the ninth week after feeding. Hormones related to bone metabolism were determined, included parathyroid hormone (PTH) , calcitonin, estradiol, growth hormone and insulin-like growth factor I (IGF-I). The results of this study were as follows: the isoflavones intake level did not affect weight gain, mean food intake and food efficiency ratio. The serum concentration of osteocalcin and the activity ofALP were not significantly different by different levels of isoflavones supplementation. The urinary DPD crosslinks value was not significantly different by different levels ofisoflavones supplementation. There were no significant differences in serum PTH, estradiol and IGFI among all groups. However, calcitonin was shown significantly higher in the groups of lIF and l/2IF than control group. And growth hormone was shown significantly higher in the groups of lIF than control group. (Korean J Nutr 2008; 41(3): 199~205)

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.12
• /
• pp.1591-1597
• /
• 2012

Adherend samples were made from unsaturated polyester and woven and mat glass fibers by the hand layup and vacuum methods. The mechanical properties of the adhesive, composite adherends, and terminal-joint and secondary-joint specimens were determined experimentally. Combinations of the experiment results and the bonding theory were used in this study. The maximum and average shear stresses were calculated based on the maximum tensile force and geometry parameters of the joint specimens. The results of the maximum and average shear stresses were compared and evaluated for six joints. The results showed that the grinding and grind/acetone joint had the highest strength among three types of terminal-joints. Similarly, the mat-mat and mat-woven joints had the highest strength among three types of secondary-joints with the same value. Conversely, no treatment and woven-woven bonding had very low strength. In each case, failure occurred always at two ends and then moved toward the middle area of the overlap length.

• Applied Biological Chemistry
• /
• v.43 no.1
• /
• pp.63-66
• /
• 2000

Proximate analyses of free sugars, free amino acids, fatty acids, total vitamin C and the soluble tannin content of the leaf and seed of Dendropanax morbifera Lev. were determined. Moisture content was 70.2% in leaf and 72.6% in seed, and crude protein contents were 1.2% in leaf and 6.2% in seed, and ash contents were 1.7% in leaf and 0.9% in seed. Total vitamin C and soluble tannin in leaf were 56.9% and 10.7% which were five times and eleven times higher in seed, respectively. Free sugar content in leaf was higher than that in seed, with the major free sugars consisting of sucrose, glucose and fructose. Turanose and xylose were not detected in leaf, but were detected in seed in small amounts. Unsaturated fatty acids were predominant in both of leaf and seed, but major fatty acids were quite different from each other. Low levels of free amino acids were found to consist mainly of arginine, aspartic acid and glutamic acid. The highest content of mineral elements in leaf and seed were calcium and potassium, respectively.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.80.2-80.2
• /
• 2012

그라핀(graphene)은 탄소 원자의 2차원 육각형 $sp^2$ 결합체로서 탄소 나노구조체가 가지는 여러 가지 우수한 특성을 보유하면서 대면적 기판 위에서 소자구현 및 투명전극 등으로의 우수한 응용성 때문에 고품질 그라핀 제조와 물리적 특성, 소자응용에 관한 연구가 활발히 진행되고 있다. 최근 그라핀 제조를 위한 여러 가지 방법이 개발되고 있으나 화학적 박리법이 저비용으로 대량생산을 위해 가장 유리한 방법으로 주목을 받고 있다. 화학적 박리법은 벌크 그라파이트를 강한 산을 이용하여 산화시켜 형성된 산화 그라파이트(graphite oxide)을 열적으로 팽창시켜 박리하고 환원하여 그라핀으로 제조하는 것이다. 보통 열적팽창을 위해서 열처리 로를 사용하게 되는데, 본 연구에서는 박리를 보다 효율적으로 진행시키고 고품질의 그라핀을 얻기 위해 마이크로웨이브를 이용한 박리법을 적용하였다. 마이크로웨이브는 설비가 간단하고 매우 균일하게 열팽창을 시킬 수 있을 뿐만 아니라 대량생산에서도 유리할 것으로 기대하였다. 천연 그라파이트(99.9%, 평균입도 $200{\mu}m$)를 Hummer 방법에 따라 $H_2SO_4$와 $KMnO_4$를 사용하여 산화시키고 필터링 후 마이크로웨이브를 조사하였다. 이후 환원 처리를 거쳐 그라핀을 제조하였다. 라만스펙트럼 및 투과전자현미경으로 분석한 결과 우수한 품질의 그라핀이 형성되었음을 알 수 있었다. 그라핀의 두께 및 품질은 마이크로웨이브의 인가시간 및 반복 횟수가 증가함에 따라 크게 영향받는 것을 확인하였다. 본 발표에서는 마이크로웨이브를 사용한 산화 그라파이트 박리 및 그라핀 제조라는 새로운 시도와 주요변수에 따른 그라핀 특성에 관한 결과를 논의할 것이다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.3
• /
• pp.41-47
• /
• 2011

Processing of the raw LiDAR data requires the high-end processor, because data form is a vector. In contrast, if LiDAR data is converted into a regular grid pattern by filltering, that has advantage of being in a low-cost equipment, because of the simple structure and faster processing speed. Especially, by using grid data classification, such as Quadtree, some of trees and cars are removed, so it has advantage of modeling. Therefore, this study presents the algorithm for automatic extraction of ground points using Quadtree and refion growing method from LiDAR data. In addition, Error analysis was performed based on the 1:5000 digital map of sample area to analyze the classification of ground points. In a result, the ground classification accuracy is over 98%. So it has the advantage of extracting the ground points. In addition, non-ground points, such as cars and tree, are effectively removed as using Quadtree and region growing method.