• Composites Research
• /
• v.28 no.1
• /
• pp.22-27
• /
• 2015

Although it is important to have high strength of each of fiber and matrix, interface between fiber and matrix is most important. If NaCl water penetrates the interface, that area will be weak. So experiment about increasing interfacial strength is in process. In this study, the change of properties by mechanical, interfacial and micromechanical tests was observed after NaCl and aging treatment. The changes in mechanical properties of glass fiber were investigated using single-fiber tensile test. Interfacial properties between glass fiber and epoxy resin were evaluated using nondestructive acoustic emission (AE) and micromechanical test applied to fatigue test. Through change of fatigue properties, relative interfacial properties were evaluate. In conclusion, glass fiber diameter decreased and the reduction of mechanical and interfacial was observed with NaCl solution and aging treatment.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.343-346
• /
• 2010

형상기억합금이 삽입된 복합체는 힌지나 추가적 작동기 없이 그 자체로서 지능 구조의 역할을 할 수 있어 많은 분야에서 활발히 연구되고 있다. 본 논문에서는 형상기억합금(Shape Memory Alloy) 선이 삽입된 $\cap$자형 복합재를 제안하고, 형상기억합금과 모재가 정해진 경우의 곡률 변화에 영향을 주는 주요 설계 변수를 복합재의 너비, 두께, 형상기억합금의 편심률을 설계변수로 가정하고 유한요소 해석과 패널 제작 및 실험을 통해 검증한다. 먼저 라고다스(Lagoudas)모델을 형상기억합금의 구성방정식으로 이용한 유한요소해석모델을 구성하여 수치해석을 수행하고, 11 종류의 형상기억합금 선이 삽입된 유리섬유강화복합재(Glass Fiber Reinforced Plastic) 패널을 제작하여 열하중에 따른 곡률변화를 관찰한다. 해석결과와 실험결과의 비교를 통해 해석모델의 타당성을 검증하며, 해석을 통해 각 설계 변수들의 곡률변화에 대한 영향을 파악한다.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 1999.11a
• /
• pp.204-209
• /
• 1999

각종섬유를 연속섬유 보강재로 사용하는 경우, 일반적으로 수지를 매트릭스로 하여 봉재 형상(FRP rod)으로 제조하고있다. 성형된 섬유는 수지가 섬유의 보호재 역할을 하기 때문에, 콘크리트내의 알칼리와 절연되어 열화가능성이 작다고 고려된다. 그러나, 일반적으로 섬유를 둘러싼 수지는 그 두께가 수 {$mu}m$이하로 특히 얇고, 운반이나 보관시에 수지가 물리적 변형 및 자외선에 의한 열화가 일어날 가능성이 높다. 또 알칼리에 의하여 에스테르의 가수분해반응에 따른 폴리머의 부식 등, 수지에 알칼리의 침입을 완전히 막는 것이 불가능하게 여겨진다.

• Composites Research
• /
• v.18 no.4
• /
• pp.27-34
• /
• 2005

Salt water spray and immersion tests were experimentally conducted for over 6 months to investigate the durability of glass fabric/phenolic composites under salt water environment. Mechanical properties such as tensile properties, flexural properties, and shear properties were evaluated and thermal analysis properties such as storage shear modulus, loss shear moduls, and tan 6 were obtained through a DMA. A change in chemical structures was analyzed through a FTIR. According to the results, mechanical properties and thermal analysis properties were sensitive to salt water environment and these properties began to degrade in increasing in exposure times. However, tensile and flexural moduli started to decrease and then slightly increase as increasing in exposure times due to plasticization and crosslinking in matrix as well as physical swelling in composites. Beyond a certain exposure times, these properties began to decrease as further increasing in exposure times. Also the shape and location of peaks in FTIR curves were insensitive to exposure times, but the intensity of peaks would be. finally we found that the durability of glass fabric/phenolic composites were affected on salt water immersion environment rather than salt water spray environment.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.05a
• /
• pp.514-519
• /
• 2003

치수효과는 콘크리트나 암석과 같은 quasi-brittle 재료들의 물리적 특성에 영향을 미친다. 모든 재료의 경우에 체적이 크면 흠이 클 수 있다. 구조물의 섬유 묶음 크기가 증가하면, 섬 유 강도가 감소하는 현상을 흔히 경험해 왔다. 복합재료내의 강도 분배와 치수사이의 관계를 특성 짓는 효과적인 방법은 아직 완전하지 않다. 본 논문에서는 경험에서 얻어진 Filament Wound 튜브에 사용되는 유리 섬유와 에폭시의 인장강도 감소비율 실험데이터로 얻은 그래프로부터 Crasto와 Kim의 일방향 보강된 AS4/3501-6복합재료의 90$^{\circ}$방향 인장강도에 대한 실험결과로부터 복합재료 봉구조재의 강도 치수효과를 증명하였다.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1439-1441
• /
• 2003

전기절연재의 구조재로 많이 사용되고 있는 FRP(fiber reinforced plastics)는 열경화성 수지를 접착성 결합제(binder)로 하고 고강도 섬유를 보강재로 한 복합재료로서 기계적, 화학적, 전기적 특성이 매우 우수하다. FRP의 기계적 강도는 유리섬유에 의존 하고 있으므로 유리섬유의 방향과 힘을 가하는 방향에 따라서 그 강도의 차이는 매우 크게 나타난다. 본 연구에서는 섬유의 배향에 따른 강도의 변화를 이해하기 위하여 시편을 제작하여 압축강도를 측정하고 압축강도와 응력의 분포를 유한요소법으로 시뮬레이션하였다. FRP rod에 압축응력이 가해졌을 때 섬유의 배향에 따른 파괴강도와 응력의 분포를 유한요소법을 이용하여 시뮬레이션하였고 모델링에는 3-D Shell과 3-D Brick 요소를 사용하였다. 제작된 시편의 강도특성과 시뮬레이션을 통한 응력의 분포를 서로 비교하여 시편의 파괴에 미치는 응력을 고찰하였다.

• Composites Research
• /
• v.27 no.3
• /
• pp.83-89
• /
• 2014

The purpose of this study is to improve the strength and thermal conductivity of polybutylene terephthalate (PBT) by embedding various additives. Specimens were prepared using PBT pellets embedded with glass fibers (GF) and boron nitride (BN) powders. The test results showed that tensile strength decreased, and thermal conductivity increased with increasing BN contents. with thermal shock cycles conducted, unfilled PBT showed a considerable decrease in failure strain and strength, whereas strength and thermal conductivity of glass fiber and BN particle-embedded PBT had little differeces. With increasing BN, the thermal conductivity of PBT composites was highly improved.

• Composites Research
• /
• v.35 no.2
• /
• pp.75-79
• /
• 2022

In this study, the effect of mechanical and chemical properties of glass fiber reinforced thermoplastic (GFRTPs) according to the number of recycling was confirmed. The composite materials were manufactured through a hot press compression molding process using an E-glass chopped strand mat and a polypropylene film. Four specimens were named according to the number of recycled test repeat: First manufacture, 1st Recycle, 2nd Recycle, and 3rd Recycle. To investigate the mechanical properties of the prepared specimen, tensile test, flexural test, drop-weight impact test, differential scanning calorimetry (DSC), and field emission electron gun-scanning electron microscope (FE-SEM) was performed. As a result, as the number of recycling steps repeat, the degree of crystallization, tensile strength, elastic modulus, and flexural strength were increased, but the impact properties were greatly reduced.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.2
• /
• pp.81-85
• /
• 2017

Fiber-reinforced polymer composites, which are made by combining a continuous fiber that acts as reinforcement and a homogeneous polymeric material that acts as a host, are engineering materials with high strength and stiffness and a lightweight structure. In this study, a shape memory alloy(SMA) reinforced composite actuator is presented. This actuator is used to generate large deformations in single lightweight structures and can be used in applications requiring a high degree of adaptability to various external conditions. The proposed actuator consists of numerous individual laminas of the glass-fiber fabric that are embedded in a polymeric matrix. To characterize its deformation behavior, the composition of the actuator was changed by changing the matrix material and the number of the glass-fiber fabric layers. In addition, current of various magnitudes were applied to each actuator to study the effect of the heating of SMA wires on applying current.

• Composites Research
• /
• v.35 no.1
• /
• pp.42-46
• /
• 2022

In this study, when the carbon fiber composite was manufactured, the correlation between the porosity and mechanical properties according to the number of glass fiber felts laminated together and the stacking sequence was confirmed. The carbon fiber composite was manufactured by stacking glass fiber felts, which are highly permeable materials, and using vacuum assisted resin transfer molding (VARTM). Porosity was measured by photographing the cross-section of the specimen with an optical microscope and then using porosity calculation code of MATLAB, and mechanical properties were measured for tensile strength, modulus by tensile test. Furthermore, Pearson correlation coefficient between porosity and mechanical properties was calculated to confirm the correlation between two variables. As a result, the number of glass fiber felt increased and the distance from the center of laminated composites increased, the porosity increasing were confirmed. In addition, tensile strength/modulus showed a weak positive correlation with porosity. Also, in order to confirm the effect of only porosity on tensile strength and modulus, mechanical properties calculated by CLPT (Classical Laminate Plate Theory) and experimental values were compared, and the difference in tensile strength showed a strong positive correlation with porosity and the difference in modulus showed a weak positive correlation with porosity.