• Korean Chemical Engineering Research
• /
• v.51 no.1
• /
• pp.93-97
• /
• 2013

A lab-sized distillation experiment was conducted using small-size packings and a horizontal distillation column. The 6.7 mm Raschig ring type packings of stainless steel and a 40 mm glass column were used, and five independent electric heaters were installed in the axial direction to adjust the column inside temperature separately. The temperature was continuously distributed along the column length to provide equivalent equilibrium to the temperature for the separation. From the experimental results, a larger HETP of the column than the vertical distillation column was obtained, but it was found that the practical separation with proper processing capacity and separation efficiency was available.

• KSBB Journal
• /
• v.24 no.5
• /
• pp.420-424
• /
• 2009

The present study was aimed for the fetor in the livestock facilities. Simple detection systems for ammonia and hydrogen sulfide were examined to see the mechanism making the discoloration length of malodorous substance concentration. Detector tube for ammonia showed a good linearity of 99.6% while hydrogen sulfide detector tube gave 99.7% linearity with reproductivity of 95%.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1994.04a
• /
• pp.16-22
• /
• 1994

2.75인치 MK4/40 및 MK66 추진기관용 연소관의 국산화 개발을 목적으로 가공 열처리와 유동성형 공정을 조합한 열가공 유동성형 공정을 적용하여 치수제어시험을 하고 개발품과 수입 연소관을 비교하여 물성 및 구조시험을 실시하여 그 결과를 비교 분석하였다. 개발된 연소관은 수입연소관에 비하여 제작공정이 단축되었고, 열가공 유동성형 공정보다 치수제어에 유리하며, 내경 및 두께 규격을 만족하였다. 또한 물성 및 구조시험 결과 수입 연소관에 비하여 우수한 성질을 나타내었다.

• International Journal of Highway Engineering
• /
• v.8 no.2 s.28
• /
• pp.1-12
• /
• 2006

An existing Steel pipe, Cast iron pipe and Concrete pipe is can not escaped from aging, specially Metal tube is causing many problems that the quality of water worse is concerned about many rust and mike efficient use of preservation of water. The use of Glassfiber Reinforced Plastic Pipe(GRP PIPE) should be one of the possible scheme to get over these problems. The GRP PIPE has an excellent resistance power and the life is lasting from 50 to 100 years roughly. It's to be useful as a result of high durability and a good construction work also it is a light weight therefore can be expected to short the time of construction and man power. In this research, to executed the small-scaled model test, in-situ model test using CLSM of in-situ soil and to evaluated the stress - strain of the pipe also try to estimated how useful is. From the model test in laboratory, the vertical and horizontal deformation of the GRP PIPE measured in six instance using 200mm and 300mm in diameters. The value of experimentation, theory, analysis got the same results of the test, but the vertical and horizontal deformation gauged in small and the earth pressure was almost zero using CLSM of in-situ soil..

• Journal of the Korean Vacuum Society
• /
• v.16 no.5
• /
• pp.330-337
• /
• 2007

Influence of glass dielectric property (dielectric constant K, dielectric loss) on the external electrode fluorescent lamps of the dielectric barrier discharge has been investigated with 4-different glasses. Conventional borosilicate glass tubes with $K=5.6{\sim}5.9$ and tan ${\delta}=5.0{\times}10^{-3}{\sim}6.0{\times}10^{-3}$ and aluminosilicate glass tubes with high K=6.6 and low tan ${\delta}=1{\times}10^{-4}$ and soda-lime glass tribes with K=7.7 and tan ${\delta}=1.37{\times}10^{-2}$ have been compared. The high value of dielectric constant K makes the capacitance of external electrode fluorescent lamps intensity and enhances the discharge efficiency. The dielectric loss of tan ${\delta}$ shows the factor of power consumption in the external electrode to induce heats and to be weak in pinhole stability. The aluminosilicate glass tubes of high K and low tan ${\delta}$ have been enhanced by $14{\sim}18%$ in luminance and efficiency in comparison with the conventional borosilicate glass tubes and the aluminosilicate external electrode fluorescent lamps are strong against the pinhole formation. Soda-lime glass tubes with high K and high tan ${\delta}$ are a little favorable in luminance and efficiency and they are very weak in pinhole occurrence.

• Proceedings of the Optical Society of Korea Conference
• /
• 2005.02a
• /
• pp.152-153
• /
• 2005

• Proceedings of the Optical Society of Korea Conference
• /
• 2004.07a
• /
• pp.134-135
• /
• 2004

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.204-204
• /
• 2016

다양한 형태의 대기압 저온 플라즈마 장치를 개발하고 특성을 연구하였다. 최근 대기압 저온 플라즈마를 의료 및 미용 분야에 적용하기 위한 연구가 활발하게 진행되고 있다. 본 연구에서는 대기압 플라즈마 장치의 생체 적용을 위해 전기적, 열적 피해가 없는 플라즈마 발생 장치를 개발하였다. 대기압 플라즈마 발생 장치는 크게 플라즈마 제트와 유전 격벽 방전(DBD) 플라즈마의 형태로 나눌 수 있다. 대기압 플라즈마 제트는 고압 전극의 역할을 하는 주사 바늘과 바늘을 감싸고 있는 유리관, 유리관의 외부에 위치하는 접지 전극의 구조로 되어 있다. 방전 기체는 방전이 용이한 불활성 가스가 주로 사용되지만, 필요에 따라 $N_2$나 Air같이 방전이 어려운 분자 및 혼합 기체도 사용 한다. 방전 기체에 따라 대기압 플라즈마 제트의 전극 구조를 다르게 적용하였으며, 각 구조에서의 플라즈마 방전 특성을 연구 하였다. 유전 격벽 방전 플라즈마 장치는 고압 전극과 접지 전극 사이에 유전체가 위치하는 구조이다. 방전 가스를 불어주지 않아도 대기중에서 방전이 가능하고, 구조가 간단하여 용도에 맞는 다양한 형태로 방전이 가능하다. 이러한 대기압 저온 플라즈마의 특성 연구를 바탕으로 전기적, 열적 피해가 없으며 사용자 편의성을 갖춘 다양한 형태의 대기압 플라즈마 장치를 개발 하였다. 본 연구를 통하여 대기압 저온 플라즈마 발생 장치의 개발과 활용 연구에 도움이 될 것으로 기대한다.

• Korean Journal of Optics and Photonics
• /
• v.9 no.3
• /
• pp.186-190
• /
• 1998

We fabricated a diode-side pumped high power Nd:YAG laser with a gold coated flow tube(diameter of 10mm) and three sets of 140W diode bar. The diameter of Nd:YAG rod was 6mm and its length was 130mm. We obtained 130W cw power from a linear resonator with an 11% output coupler, which corresponds to the slope efficiency of 43% and the optical efficiency of 31%. The measured beam quality factor(M$^2$) reached about 85 which is fairly large due to the large size of the rod. Thermal lensing of the rod was measured to be 5.3-7.4D/$kW_{pump}$ when the laser was operating.

• Journal of Korean Association for Spatial Structures
• /
• v.8 no.6
• /
• pp.75-83
• /
• 2008

The R.C Building will be superannuated as time passes by heavy load and serviceability. Methods of damage detection are used a visual angle of human or non-destructive test in the R.C Building. In case of the latter, Problems of damage detection are occurred to directions of steel bar. Elastic waves are difficult to assaying test using 1 axial type of accelerometer in reinforced concrete. In this study, fundamental studies for estimations using 3 axial type of accelerometer are discussed oscillator of elastic waves when embedded glass tube pipe or steel bar in flexible concrete specimens.