• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.4
• /
• pp.743-754
• /
• 2000

Model parameters of the WASP5 applied to Saemanguem lake were estimated. The methodology is based on grouping water quality constituents and relevant parameters and successively estimating each group of parameters by a trial-and-error procedure. Chlorophyll-a, nitrogen cycles, phosphorus cycles, BOD and DO were simulated at the complexity level 4. The Saemangeum basin divided into a number of unit sub-watershed. And a water budget model analysis with 22 years from 1975 to 1996 year was examined. In this paper, input data at upstream boundaries of model was made to determine seasonally-averaged flow rate through water budget analysis. Calibration and verification of the model were used seasonal average of water quality measurements in 1997 and 1998 years. Grouping water quality constituents and associated parameters proved to be efficient in estimating a number of model parameters. From the results of model calibration and verification, it was found that quantitative evaluations of nonpoint source for organic matters are essential.

• Journal of Convergence for Information Technology
• /
• v.10 no.7
• /
• pp.153-159
• /
• 2020

In order to find out the condition of flow in sewer pipes, this study investigated the characteristics of tractive force of sewage flow estimated using actual measured values of water level, velocity, and flowrate in sewers located at uppermost portion in a treatment area during dry weather periods. When the scene of sewage flow was taken by CCTV after cohesive and non-cohesive solids (tofu and sand) were put on the sewer invert, it was found that the solids could be flushed without significant interruption. In sewer with slope of 0.00319, the frequency exceeding the minimum tractive force of sewage during a weekday was zero, while it was 10 per day with slope of 0.00603. During the week of the field observation, the event to exceed the minimum tractive force occurred once, suggesting that sewer odor would potentially increase. Maximum tractive force in sewer with steep slope was 2.9-3.1 N/㎡, but with gentle slope it decreased to 1.6-1.7N/㎡. It was also observed that the interval of time maintained below the criterion of minimum tractive force increased, during weekends compared to weekdays and for the sewage including non-cohesive particles which could enter combined sewers during a storm period. This study found that the sewer sediments formed by direct feces input into sewers, through sewer pipes which were designed meeting the standard sewer design criteria, could be flushed without staying as deposited solids state for a long time.

• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.562-566
• /
• 2012

A novel design of tubular segmented-in-series(SIS) solid oxide fuel cell (SOFC) sub module was presented in this paper. The tubular ceramic support was fabricated by the extrusion technique. The NiO-YSZ anode and the yttria-stabilized zirconia (YSZ) electrolyte were deposited onto the ceramic support by dip coating method. After sintering at $1350^{\circ}C$ for 5 h, a dense and crack-free YSZ film was successfully fabricated. Also, the multi-layered cathode composed of LSM-YSZ composite, LSM and LSCF were coated onto the sintered ceramic support by dip coating method and sintered at $1150^{\circ}C$. The performance of the tubular SIS SOFC cell and sub module electrically connected by the Ag-glass interconnect was measured and analysed with different fuel flow and operating temperature.

• Proceedings of the Safety Management and Science Conference
• /
• 1999.11a
• /
• pp.543-563
• /
• 1999

For hazardous air pollutants(HAP) such as NO and $NO_2$ decomposition efficiency, power consumption, and applied voltage were investigated by SPCP(surface induced discharge plasma chemical processing) reactor to obtain optimum process variables and maximum decomposition efficiencies. Decomposition efficiency of HAP with various electric frequencies(5~50 kHz), flow rates(100~1,000 mL/min) initial concentrations(100~1,000 ppm), electrode materials(W, Cu, Al), electrode thickness(1, 2, 3 mm) and number of electrode windings(7, 9, 11) were measured. Experimental results showed that for the frequency of 10 kHz, the highest decomposition efficiency of 94.3% for NO and 84.7% for $NO_2$ were observed at the poser consumptions of 19.8 and 29W respectively and that decomposition efficiency decreased with increasing frequency above 20 kHz. Decomposition efficiency was increased with increasing residence times and with decreasing initial concentration of pollutants. Decomposition efficiency was increased with increasing thickness of discharge electrode and the highest decomposition efficiency was obtained for the electrode diameter of 3mm in this experiment. As the electrode material, decomposition efficiency was in order : tungsten(W), copper(Cu), aluminum(Al).

• Plant Journal
• /
• v.14 no.3
• /
• pp.29-34
• /
• 2018

In this study, the output and thermal efficiency of Taean Integrated Gasification Combined Cycle Plant were calculated by using the manufacturer's basic design data and the performance correction factor for each atmospheric temperature, and the actual performance was measured at summer and winter representative points. The results were compared with the calculated values to verify their validity. The thermal efficiency is the highest at around $15^{\circ}C$ and lower at lower temperature and higher temperature. This is similar to that of natural gas Combined Cycle Power Plant, but the thermal efficiency has drastically decreased due to the increase of power consumption of the air separation unit at relatively high temperature. The output is highest in the range of 5 to $15^{\circ}C$, and is kept almost constant at below $5^{\circ}C$ and declines above $15^{\circ}C$. The reason why the output does not increase at low temperatures is that the torque limit of the shaft is activated by the increase of the flow rate due to the nitrogen injection of the gas turbine combustor. In order to improve the performance in the future, efforts should be made to improve the power generation output and to reduce the power consumption of the air separation unit in summer.

• Clean Technology
• /
• v.20 no.2
• /
• pp.179-188
• /
• 2014

The effect of desorption pressure on $CO_2/N_2$ breakthrough behaviors for 4 different adsorbents was studied at a fixed bed. Zeolite 3A, 4A, 5A, and 13X pellets were used as adsorbents. Cyclic operations were executed with varying desorption pressure from vacuum (0 bar) to 3 bar while other conditions such as adsorption step pressure (3 bar), temperature (293 K), composition ($CO_2:N_2=10:90$vol%) and flow rate (400 ccm) were fixed at constant values. Each adsorption and desorption step was set as 80 min, which totaled up to 160 min per a cycle. 5 cycles with adsorption and desorption steps were run overall. After the experiment, breakthrough time, saturation time, and adsorption amount were measured and compared in order to find an optimum adsorbent and a proper operating condition for a post combustion $CO_2$ capture process.

• Journal of Fisheries and Marine Sciences Education
• /
• v.18 no.3
• /
• pp.293-301
• /
• 2006

This study was undertaken to prolonging the freshness in Squid(Todarodes pacificus) on the effects of ice storage methods(tap water ice, electrolytic water ice) using stainless diaphragm electrolytic instrument and also test an efficiency of instrument. Basically, stainless diaphragm electrolytic instrument studied for changes of pH on difference water flow and ampere. The lower water flower and higher ampere made low pH on acid part of electrolytic instrument. Squid samples were stored in tap water ice, acid part of electrolytic water and base part of electrolytic water and used in studying the changes of VBN and skin color through storage. Acid water had strong sterilization effects and VBN was lower levels of acid water than the others. Base water had not sterilization effects. Tap water ice storage was more sterilizing effects than base water ice storage but less effects than acid water ice storage. Lightness of Squid skin showed getting decrease at storage of ice water of all storage methods but acid water ice storage showed more retarding than the other two storage. From these results, it could be suggested that acid electric water ice storage is effective in extendance the shelf-life of squid at chilled storage.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1134-1138
• /
• 2010

호소의 수질오염 문제를 해결하기 위해선 우선 소하천에서 강우유출에 의한 비점오염물질이 어디서 얼마나 발생하는지에 대한 정량적인 조사가 필요하다. 그러나 유역의 오염원에 대한 정량적인 조사가 이루어지려면 많은 비용과 시간 그리고 노력이 필요하다. 따라서 본 연구에서는 대청호 상류유역의 소하천인 안내천을 대상으로 강우유출수 조사를 실시하고, 높은 예측 정확성 때문에 세계적으로 널리 쓰이고 있는 Long-Term Hydrologic Impact Assessment(L-THIA)을 이용하여 실측데이터와 L-THIA 모델의 결과를 비교하였다. 안내천의 유역면적은 16.5 $km^2$로 유역의 약 69.5%가 산림, 농업 및 초지지역이 25.3% 그리고 주거지역이 2.6%로 조사되었다. 수질분석을 위하여 자동수질시료채취기(ISCO sampler 6712)를 설치하여 시간단위의 시료를 채취한 뒤 수질농도를 측정하였다. 수질항목은 유기물질인 $BOD_5$, TOC, T-N, T-P 항목에 대하여 수질오염 공정시험법으로 분석하였다. WHAT 시스템을 이용하여 분리된 직접유출량은 315.5~161,835.1 $m^3$의 범위로 나타났다. 직접유출량을 이용하여 산정한 유역의 EMC 농도는 안내천 유역의 $EMC_{BOD}$는 1.0~2.4 mg/L, $EMC_{TOC}$는 1.429~5.491 mg/L, $EMC_{COD}$는 2.2~10.2 mg/L, $EMC_{TN}$은 2.906~10.864 mg/L, $EMC_{TP}$는 0.029~0.285 mg/L의 범위를 보였다. 또한 실측된 유량과 농도를 이용하여 산정한 오염부하는 안내천 유역이 $BOD_5$ 37.9~390.9 g, $COD_{Mn}$ 0.8~1,657.5 g, TOC 0.54~791.83 g, T-N 0.968~1,758.174 g, T-P 0.011~42.139 g의 범위로 나타났다. L-THIA 모델을 이용하여 직접유출량의 산정된 결과와 실측 결과를 비교 분석한 결과 결정계수와 유효지수가 0.95와 0.93으로 높게 나타나 대청호 상류유역에서 발생하는 유출량을 모의하는데 적절할 것으로 판단된다. 토지이용도와 토양도 그리고 일 강우자료만으로 구축되는 L-THIA 모델을 이용하여 대청호 상류의 소하천 유역에 대하여 비점오염원 유출특성을 해석하는 것이 가능 할 것으로 판단된다.

• Korean Journal of Food Science and Technology
• /
• v.24 no.2
• /
• pp.165-170
• /
• 1992

The creep behavior of gels made with $30{\sim}45%$ gelatinized rice starch was measured over a wide range of temperature. Compressive creep curves of rice starch gels conformed to a six element mechanical model consisting of one Hookean, two Voigt and one Newtonian component. The creep compliance of gels decreased with increasing starch concentrations. Among viscoelastic constants of the mechanical model, elastic modulus was mainly influenced by the change of starch concentrations. The concentration-invariant compliance curve was obtained by reduction to 38% using reduction parameter $a_{c}$. The creep compliance curves of 45% starch gels increased with temperature, which indicated that rice starch gels became softer and less rigid with increasing temperature. When the compliance at $20^{\circ}C$ was set as a reference curve, creep compliance data for 45% gels at various temperature could be superimposed as a continuous smooth curve. The apparent activation energies of 45% rice starch gels calculated by the modified WLF equation were not intrinsic, but decreased as temperature increased.

• Korean Journal of Food Science and Technology
• /
• v.37 no.2
• /
• pp.312-317
• /
• 2005

Chemical composition, and mineral and heavy metal contents of Yeomsan and Baekso sun-dried salts (1-5-year-old) were determined. Moisture contents (Yeomsan, 6.07-17.02%; Baekso, 4.29-16.15%) and pH (Yeomsan, 5.92-6.31; Baekso, 5.52-6.23) decreased as age of salts increased, while NaCl contents (Yeomsan, 80.35-92.74%; Baekso, 81.06-94.58%) increased with increasing storage period of salts. Older salts had lower content of water-insoluble matters. Nitrate content was not affected by aging of salts, whereas nitrite content was lower in older salts. Sulfate content of sun-dried salt decreased with aging of salt. Average concentrations (ppm wet weight) of major minerals in Yeomsan and Baekso sun-dried salts were: Mg, Mg, 1002-119; K, 1062-3411; Ca, 1503-3437; Li, 25-101; Ge, 8.35-0.21; Si, 43.99-6.48; and Mn, 6.79-1.55. Mineral content generally decreased with salt aging. Among heavy metals, Hg was not detected in all salts, and Cd (0.02-0.04ppm) was not affected by storage period. Pb was not detected in 5-year-old salts. Older salts showed brighter color than younger ones.