• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.74-78
• /
• 2012

본 연구는 하천에서 식생에 의한 흐름구조 변화가 오염물질 이동에 미치는 영향을 알아보기 위해 흐름방향 확산계수를 산정하였다. 정수식생 조건에서 횡방향 수심적분된 와점성계수는 비식생 조건에서의 와점성계수와 다르게 적용되어야 하며 이를 위해 유량 횡분배법을 Jordanova and James (2003) 실험에 적용하였다. 제시된 실험조건을 잘 재현하는 와점성계수의 값을 역산하였으며, 이에 관한 산술평균 값을 향후 수리모형의 적용을 위해 정수식생 조건에서의 무차원 와점성계수로 제안하였다. 결정된 무차원 와점성계수를 이용하여 부분식생 개수로 흐름에서 흐름방향 확산계수를 산정하여 오염물질의 이동에 대한 특성을 분석하였다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.5
• /
• pp.579-587
• /
• 1999

The flow distribution characteristics in a complex duct system have been investigated in this paper by three means, namely experimental measurement, numerical simulation and the Extended T-method analysis. While the exit flow rates predicted by the three-dimensional CFD calculation and those given by the experiment show a close agreement, the results from the one-dimensional Extended T-method are found to differ from the experiment by -22.2% to 26.3% for the various exits. These discrepancies may be attributed to the underlying limitation concerning the fitting loss coefficients, which assume that the flow in front of the fittings is fully developed. It is proposed that, in order to analyse the three-dimensional flow distributions in a complex duct system by one-dimensional analysis such as the Extended T-method, further Improvements to the fitting loss coefficients should be made.

• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.2
• /
• pp.215-222
• /
• 2013

The fluctuation of inlet flow to a water treatment plant makes a serious problem that it can change the outlet flowrate from each process abruptly. Since it takes very short time for the surface wave occurred from the fluctuation of inlet flow to reach the latter processes, it is impossible for operators to cope with that stably. In order to investigate the characteristics of hydraulic behavior for rectangular sedimentation basin in water treatment plant, CFD(Computational Fluid Dynamics) simulation were employed. From the results of both CFD simulations, it was confirmed that time taken for the follow-up processes by the fluctuation in intake well can be estimated by the propagation velocity of surface waves. Also, it takes very short time for the surface wave occurred from the fluctuation of inlet flow to reach the latter processes. In the case of inlet flowerate being increased sharply, local velocity within sedimentation basin appeared as wave pattern and increased due to convection current. Also, it could be observed that vortex made local velocity in the vicinity of bottom rise.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.614-614
• /
• 2015

하천수는 하천의 지표면에 흐르거나 하천 바닥에 스며들어 흐르는 물 또는 하천에 저장되어 있는 물을 말하며, 인구의 증가나 산업화로 인하여 물 사용이 증대되고 있는 실정이다. 이에 따라 국가에서는 하천법 제50조에 의거하여 생활 공업 농업 환경개선 발전 주운 등의 용도로 하천수를 사용하려는 자는 국토교통부장관(홍수통제소장)의 허가를 받아야 한다. 우리나라 수문특성상 우기에 집중되어 있는 물을 갈수기에 이용할 수 있도록 분배하고 관리하는 것이 어려운 실정이다. 하천법 제51조에 의하면 하천유지유량은 생활, 공업, 농업, 환경개선, 발전, 주운 등의 하천수 사용을 고려하여 하천의 정상적인 기능과 상태를 유지하기 위한 최소한의 유량을 말하며, 2006년 고시된 낙동강 수계의 하천유지유량은 대부분 국가하천을 기준지점으로 산정되었고, 산정방법은 평균갈수량 13개, 기준갈수량 2개, 하천생태계 2개 지점이다. 또한, 하천관리유량은 하천유지유량과 이수유량의 합으로 산정된다. 본 연구에서는 2013년도 말 기준으로 하천수 사용허가 현황을 정리하였으며, 용도별, 수계별, 행정구역별, 하천등급별로 하천수 사용허가 건수와 허가량을 분석하였다. 낙동강본류를 대상으로 하천시설물을 고려하여 하천관리유량을 산정하였으며, 하천유지유량의 적절성을 검토함으로써 향후 낙동강권역의 물관리방안을 모색하였다. 낙동강본류구간은 하천관리유량이 기준갈수량에 비하여 큰 형태로써 하천관리유량 확보를 위한 노력이 필요한 것으로 나타났으며, 향후 하천수 사용허가 시설물의 회귀율에 대한 실제적인 자료 수집과 함께 정확한 분석을 통한 하천의 회귀유량을 산정하고, 하폐수 방류시설을 고려하여 산정한 결과와 비교하여 보다 정확한 물수지 분석 체계를 확립하여야 할 것이다.

• Proceedings of the SAREK Conference
• /
• 2007.06a
• /
• pp.56-56
• /
• 2007

• Proceedings of the SAREK Conference
• /
• 2004.06a
• /
• pp.5-5
• /
• 2004

• Proceedings of the SAREK Conference
• /
• 2003.07a
• /
• pp.8-8
• /
• 2003

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.9
• /
• pp.491-496
• /
• 2015

Generally, the phase of the refrigerants that circulate in air-conditioning systems is repeatedly changed from liquid to gas and from gas to liquid. In vapor-compression refrigeration, the refrigerant at the inlet of the evaporator is in a gas-liquid two-phase state; therefore, to enhance the heat-transfer performance of the evaporator, the even distribution of the refrigerant across multiple passages of the evaporator is essential. Unlike the distribution of a single-phase refrigerant, multi-phase distribution requires further considerations. It is known that the multi-phase distribution at the outlet of the distributor is affected by factors such as the operating condition, the distributor's shape, and the insertion depth of the outlet pipes; here, the insertion depth of the outlet pipes is especially significant. In this study, for a cylindrical distributor with a 90-degree bend entrance and three outlet pipes, the flow uniformity at the outlet pipes was numerically tested in relation to variations of the insertion depth of the outlet pipes.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.2
• /
• pp.79-84
• /
• 2011

In general, a valve body of the automatic transmission(AT) is controlled by the clutch, the brake and lubricating oil flow in a hydraulic system and lubricant flow for each valve can be adjusted independently. To increase the lifetime of AT, the lubrication flow rate in a valve body for a 6 speed AT based parallel hybrid electric vehicle must be provided with proper oil distribution and control. In this study, we carried out several experiments without the inner parts of AT and with a AT assembly. The variation of the flow rate on oil temperature and pressure between an oil supply port and the outlets of the lubrication port was evaluated and analyzed. In the case of AT without the inner parts, it was evident that as the oil required for an operation of the clutch and brake was discharged from the outlet port, the flow rate from each lubrication port is decreased. However, the flow rate of the AT assembly was slightly increased. In addition, the lubrication flow rate was increased with increasing the oil temperature, and also it was reduced with increasing the oil pressure. Details of the resulting data are discussed.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.7
• /
• pp.386-393
• /
• 2009

The present study has been studied on a thermal and flow characteristic of the microchannel waterblock with flow distributions in each channels. Results of a numerical analysis using the CFX-11 are compared with results of an experiment. Numerical analysis and experiment are conducted under an input power of 150 W, inlet temperature of $20^{\circ}C$ and mass flow rates of $0.7{\sim}2.0$ kg/min. Base temperature and pressure drop are investigated with standard deviations of mass flow rates in each channels of samples. The flow distribution and j/f factor of the sample 4 is increased by about 65.7% and 42.6%, compared to that of the reference model sample 3.