• Title/Summary/Keyword: 유량조절기

Search Result 198, Processing Time 0.031 seconds

Development and Performance Analysis of Gas Generator with Plunger-type Flow Control Valve for Ducted Rocket : Part II (Plunger 타입 유량조절장치를 적용한 덕티드 로켓용 가스발생기 개발 및 성능분석 : Part II)

  • Han, Seongjoo;Lee, Jungpyo;Cho, Sungbong;Khil, Taeock;Kim, Minkyum
    • Journal of Aerospace System Engineering
    • /
    • v.15 no.3
    • /
    • pp.87-92
    • /
    • 2021
  • In this study, a numerical approach was utilized to observe the phenomena in the ground combustion test of a gas generator for a ducted rocket with a plunger-type flow control device. The design factors were also identified through the analysis. It was observed that the pressure increase without the adhesion of the combustion product at the discharge pipe was quite similar to the analysis assuming a cone-shaped erosive burning effect. The pressure increase in most cases was similar to the analysis results when assuming the change in discharge pipe area due to the adhesion of combustion products. Moreover, it was also established that for a given grain shape and discharge flow area, the effect of the adhesion of combustion products has a significant effect on the combustion chamber pressure for cases over n=0.45.

기기냉각수 최저온도와 정지냉각계통 유량조절밸브 개도에 관한 설계분석

  • 김도현;이중섭;오종필;오광석
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1995.10a
    • /
    • pp.444-449
    • /
    • 1995
  • 한국형 표준 원자력발전소의 정지냉각운전시 최대냉각율은 75$^{\circ}$F/hr(41.7$^{\circ}C$/hr)로 기술사양서에 규정되어 있다. 정지냉각운전 냉각율에 가장 큰 영향을 미치는 2가지 중요한 변수는 정지냉각계통 열교환기를 지나는 원자로냉각재 유량과 기기냉각수의 온도다. 이중 열교환기를 지나는 원자로냉각재 유량은 butterfly형 정지냉각계통 유량조절밸브의 개도에 의하여 조절되는데 개도에 따른 throttle 능력이 중요한 인자다. 또 기기냉각수의 온도는 해수온도의 변화에 따라 편차가 발생하므로 유량조절밸브의 개도와 기기냉각수 온도의 상관관계에 따라 냉각능력이 달라진다. 본 논문에서는 현 울진 3&4호기 정지냉각계통 열 교환기 및 조절밸브 둥의 설비를 기준으로 기술사양서 상의 냉각율 75$^{\circ}$F/hr(41.7$^{\circ}C$/hr) 유지가 가능한 최저 기기냉각수의 온도를 찾아보았고, 아울러 기기냉각수의 온도와 조절밸브의 개도 사이의 관계를 조사하였다. 그 결과 현재의 울진 3&4호기 조절밸브를 최저개도로 조절할 때 약 57$^{\circ}$F(13.9$^{\circ}C$)의 기기냉각수가 공급되어도 냉각율 제한치를 넘지 않는 것으로 분석되었다. 한편, 최저조절가능 유량이 약 2000 gpm(7570 l/min)일 경우에는 낮은 기기냉각수가 공급될 경우 최대냉각율을 초과하므로 한 train을 정지시키고 한 train만으로 운전할 것을 고려하여야 할 것으로 보인다. 이 경우 최저 약 56.5$^{\circ}$F(13.6$^{\circ}C$)의 기기냉각수가 공급되어야 한다. 본 논문의 분석결과는 향후 기기설계사양서나 운전지침서 등에 반영되어 실제 발전소 설계 및 운전절차 수립에 기여할 수 있을 것으로 생각된다.공감대의 형성이 요구된다. 질적 측면에서는 공원 녹지의 기능성의 회복이라는 측면과 시대에 부합되는 새로운 기능 및 가치의 부여가 필요하며, 이를 위해서는 공원의 매력, 공원의 시설기능 증진, 녹지의 질의 향상 및 녹지 가치의 증진에 대한 다양한 시책이 요구된다. 구성적 측면에서는 공원녹지의 개별적 존재보다는 공원 녹지를 상호간 유기적인 계통을 확보하여 공원 녹지의 네트워크를 형성하여 도시 속의 산재된 고립된 섬으로서의 공원 녹지가 아닌 시민생활에 늘 가까이 있는 생활 속의 공원녹지로 재편되어야 한다. 이러한 정책의 의제는 양적 측면에서 보전(CONSERVATION)과 창출(CREATION), 질적 측면에서 쇄신(RENOVATION)과 복구(RESTORATION), 그리고 구성적 측면에서 공원 녹지의 연결(CONNECTION)과 시민 참여에 의한 운동(MOVEMENT)이라는 정책 개념의 구현을 통해 가능하다. 이러한 정책 개념과 의제를 가지고 서울시 공원 녹지 정책을 구체화시키기 위해서 푸르름의 새로운 탄생이라는 기치 아래 풍요로운 서울, 사랑 받는 공원, 생활 속의 녹지의 3대 목표, 공원 녹지의 보전, 잠재 공원 녹지의 창출, 공원의 활성화, 녹지의 복구, 경관 보전 및 복구, 공원 녹지의 네트워크, 도시 녹화의 7대 과제를 설정하고 미시설 공원 녹지 집행, 개발 사업시 공원 녹지의 확보, 환경 녹지의 총량 보호 관리, 도시 소공원 개발, 역사 문화 공원 조성, 하천 공간 복원, 공원 시설 기능 개선, 이용 프로그램 개발, 공원 관리 개선, 환경 피해 녹지의 회복, 도시 환경 림 조성, 녹지 기능 증진, 도시 자연 경관 보전, 공원 녹지체계 구성, 공원 녹지 공급 균형, 주변 환경 녹화, 가로 녹화의 17개 시책을 제안하였다. 이러한 정책사업의 원활한 추진을 위해서는 기존의 관주도의 일방적인 공원 녹지 행정이 아닌 시민의 참여를 통한 시민이 함께 하는 정 책 사업의 추진이 요구되며, 특히 민간 부문의

  • PDF

Flow Signal Characteristics of Small Scale Electromagnetic Flowmeter in Low Conductivity Fluid Measurement (저전도율 유체 측정에서 소형 전자기유량계의 신호 특성)

  • Lim, Ki Won;Jung, Sung Soo
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.40 no.9
    • /
    • pp.613-620
    • /
    • 2016
  • In order to scrutinize the fluid conductivity effects on the electromagnetic flowmeter(EMF) characteristics, a small scale EMF was designed and fabricated. The measuring tube has a $3mm{\times}4mm$ rectangular cross-section, 9 mm length, and a $2mm{\times}3mm$ plate electrode and a ${\Phi}1.5mm$ point electrode. The design parameters, such as the magnetizing frequency and the number of coil turns, and the diameter were optimized. The EMF was tested with a gravimetric calibrator and showed good linearity in the range of 0 to $1.17{\times}10^{-5}m^3/s$. The fluid conductivity was varied between 3 and $11{\mu}S/cm$, and the magnitude of the flow signal was proportional to the fluid conductivity and the wetted area of the electrode. The design information and the test results provide flow measurement techniques for very low flowrate.

Development of a Hall-thruster Propulsion Controller for Science Technology Satellite-3 (과학기술위성3호 홀 추력 제어기 개발)

  • Rhee, Sung-Ho;Cho, Hee-Keun;Lyou, Joon
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.38 no.10
    • /
    • pp.992-997
    • /
    • 2010
  • The Propulsion Control Module(PCM) of Hall-thruster Propulsion System(HPS) for Science and Technology Satellite-3 (STSAT-3) has the flow control accuracy of less than ${\pm}$3% and the pressure control accuracy of less than ${\pm}$5%. The pressure controller adjusts pressure around the set point by using a Proportional Flow Control Valve (PFCV) and a high pressure transducer, while the flow controller regulates the flow rate using PFCV and the anode current telemetry of the Hall Thruster. The controllers are chosen as the Proportional and Integral(PI) type, and the PI gains are tuned based on the Matlab simulations. The result of the PCM test had the flow control accuracy of less than ${\pm}$1.87% and the pressure control accuracy of less than ${\pm}$5%. This paper describes the design, realization, and performance test results of the PCM.

Development of a Two-Step Main Oxidizer Shut-off Valve (2단계 개방 연소기 산화제 개폐밸브 개발)

  • Hong, Moongeun
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.45 no.8
    • /
    • pp.704-710
    • /
    • 2017
  • The supply of the liquid oxygen into a rocket combustor is simply controlled by the 'on' and 'off' positions of a main oxidizer shut-off valve. However, the partially opened position of a three-position valve can control and optimize the engine start transients by regulating the liquid oxygen flow rate during the start-up of the engine. In this paper, the design and performances of a three-position pneumatic poppet valve, which is intended to be employed in liquid rocket engines, have been presented.

Flow Rate Control of Gaseous Oxygen for a $HTPB/GO_2$ Hybrid Rocket ($HTPB/GO_2$ 하이브리드 로켓의 산화제 유량제어)

  • Oh Hwa-Young;Moon Sung-Hwan;Huh Hwanil
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2004.10a
    • /
    • pp.251-254
    • /
    • 2004
  • Hybrid rockets have many advantages over solid and liquid rockets. Hybrid rockets put forth high $I_{sp}$ like liquid rockets in spite of simple structure and low cost. As oxidizer flow rate is increased, thrust of hybrid rocket is increased accordingly. In this study, lab-scale hybrid rocket is designed, fabricated and tested. This system consists of lab-scale hybrid rocket motor, ignition system, flow system and data aquisition system. In order to control oxidizer flow rate, we construct flow rate control system by using needle valve and stepping motor.

  • PDF

$SF_6$ gas decomposition using gliding arc plasma (글라이딩 아크 플라즈마를 이용한 $SF_6$ 가스의 분해)

  • No, I.J.;Shin, P.K.;Jeong, Y.S.;Lim, H.C.;Park, G.B.;Park, J.K.;Yuk, J.H.;Cho, K.S.;Lee, D.C.
    • Proceedings of the KIEE Conference
    • /
    • 2008.07a
    • /
    • pp.1356-1357
    • /
    • 2008
  • 교류 펄스전압을 이용하여 글라이딩 아크 플라즈마 반응기에서 지구 온난화의 주요 원인으로 꼽히는 PFCs(Perfluoro compounds) 가스의 일종인 $SF_6$에 관한 분해 연구를 하였다. 가스의 농도를 조절하기 위하여 압축공기를 사용하였고 각각의 유량을 MFC를 통하여 조절하였다. 반응기 내의 양전극사이에 인가하는 전압을 아크가 발생하는 7kV$\sim$10kV 사이를 1kV 단위로 가변하였고 유량을 변화시켜가며 실험한 결과 높은 전압과 낮은 유량일 때 높은 분해율 특성을 보였다. 기본 방전 특성을 오실로 스코프를 통하여 관찰 분석하였다. 각 가스들의 분해율과 분해후 가스 성분분석은 글라이딩 아크 플라즈마와의 반응후 가스를 포집하여 FT-IR을 통하여 분석하였다.

  • PDF

Hydrologic Regime Alteration Analysis in downward river by dam-specific(functions, size) through I.H.A (수문변화 지표법을 적용한 댐 특성 요소별 하류하천에 미치는 유황변화 분석)

  • Kang, Ki-Ho;Yum, Kyung-Taek;Jung, Kwan-Sue
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2009.05a
    • /
    • pp.1422-1426
    • /
    • 2009
  • 본 연구에서는 댐 특성(기능, 규모)별로 하류하천에 미치는 유량변화 문제를를 체계적으로 분석하고자 수문변 화지표법(Indicators of Hydrologic Alteration, Richter et al., 1996)을 적용하여 한국수자원공사에서 관리하는 소양강댐 등 11개 다목적댐과 광동댐 등 12개 용수전용댐의 일단위 유입량과 방류량 자료를 이용, 연최소 최대유량 크기와 지속기간, 유량변화정도 등을 분석하여 댐운영이 하류하천에 미치는 유량변화를 비교분석 하였다. 광동댐 등 12개 용수전용댐의 월 유량변화의 산정 결과, 갈수기에 해당하는 10월부터 다음해의 6월까지 8개월간은 댐건설전 월평균 방유량은 $0.64m^3/sec\sim3.05m^3/sec$이었으나, 댐건설후 월평균 방류량은 $0.33m^3/sec\sim2.99m^3/sec$로 -69.7%$\sim$167.8%의 분포를 나타내고 있으나 12월과 1월을 제외하면 댐 건설 이후 오히려 6.8%$\sim$69.7% 가 감소하였다. 우기철인 7월부터 9월까지 3개월간은 댐건설전 월평균 방류량이 $6.82m^3/sec\sim7.67m^3/sec$이었으나, 댐건설후 월평균 방류량은 $4.12m^3/sec\sim4.35m^3/sec$로 51.0%$\sim$55.1%가 감소하여 저수지 공용량을 이용한 저류효과가 다소 있었음을 알 수 있다. 용수전용댐과 다목적댐의 분석 결과를 비교하여 보면, 용수전용댐은 1일 최소유량의 경우는 평균적으로 76.52%가 증가하였으나 3일부터 90일 최소유량의 54.19%$\sim$67.19%까지 감소하여 갈수기 하류유량 개선효과는 없으나, 다목적댐의 경우는 1일 최소 유량은 743.76%가 증가하였으며 90일 최소 유량도 83.62%가 증가하여 갈수기 하류유량 개선 효과가 큰 것으로 분석되었다. 용수전용댐의 1일 최대유량의 경우는 37.8%가 감소되며 90일 최대유량은 38.5$\sim$51.0%까지 감소하여 홍수기 댐의 저류효과가 점차 증가하였다. 다목적댐의 경우는 1일 최대 유량은 59.4%가 감소하였으며 감소량은 점차 감소하여 90일 최대강우량은 30.1%가 감소하여 홍수기 댐 저류효과로 하류홍수량을 상당히 조절함을 알 수 있다.

  • PDF

Study on Spray characteristics of Dual-Manifold Injector with Various Tangential Entries (이중 매니폴드 분사기에서 접선방향 유입구의 변화에 따른 분사특성 연구)

  • Lee, Ingyu;Jeong, Seokgyu;Yoon, Jungsoo;Park, Gujeong;Yoon, Youngbin
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.43 no.10
    • /
    • pp.868-874
    • /
    • 2015
  • Thrust variation is an essential parameter in a space mission such as landing on an atmosphereless planet or docking a spacecraft. In order to achieve the thrust variation control, using throttleable injector is a representative and general method. A dual-manifold injector, one of throttleable injectors, was used to control mass flow rate. Five kinds of injectors were designed and investigated in order to compare the spray characteristics of the dual-manifold injector with various tangential entries. Spray angles and patterns were measured to determine external flow characteristics and film thicknesses were measured in order to investigate the internal flow patterns.

Prediction Equation of Solar Collector Outlet Air Temperature (태양열(太陽熱) 집열기(集熱器) 출구온도(出口温度) 예측방정식(豫測方程式))

  • Moon, Soung Hong
    • Journal of Biosystems Engineering
    • /
    • v.10 no.1
    • /
    • pp.48-53
    • /
    • 1985
  • 농산물 건조를 위하여 평판형 태양열 집열기를 이용할 경우 가열된 출구공기는 각종 농산물건조적온보다 일반적으로 고온이므로 이의 조절을 위한 출구공기 온도의 예측이 중요시 된다. 본 연구에서는 차원해석법(dimensional analysis)을 이용하여 평판형 집열기의 출구에서 나오는 가열된 공기의 온도를 예측하는 방법이 제시되었으며, 이 방법을 이용하여 집열기의 출구공기온도 예측방정식들이 유량별로 유도되었다. 이 방정식들로부터 구한 출구온도들은 실측한 값들과 잘 일치하였으며($R^2$=0.917~0.957) 또한 집열기의 효율을 나타내는 이론식이 출구공기온도 예측방정식으로 부터 직접 유도되었다.

  • PDF