• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.8
• /
• pp.146-154
• /
• 1997

Solenoid-folw control type ABS is used with a 'dump and reapply' pressure control arrangement instead of using 2/2 (normal open/close) solenoid valves in convensional systems(sol. -sol. control type), a flow control valve is used which replaces the (no) inlet valve. The flow control valve controls fluid flow providing a nearly constant reapply rate( .theta. ) after the dump plase of ABS operation. In this study, to investigate a characteristics of brake pressure by PWM control, test rig was consisted of ABS hydraulic modulator, digital controller, pneumatic power supply and brake master cylinder. For comparison with experi- mental results, system modelling and computer simulation were performed. As a result, experiment results showed fairly agreement with the simulation. Also, it is shown that the pressure gradient (tan .theta. ) is affected by pressure, frequency, duty ratio and expressed with an exponential funtion.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.77-82
• /
• 2009

If we can supply accurate minute flow rate to the households, we can solve many problems that are occurring in consequences of uncontrolled flow rate for the households. Therefore, this paper presents an innovative solution to the source of the problems by illustrating how we can control the flow rate to the household. This paper proves such problems even can be solved in a case when there is a room turned off the heating.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2005.05a
• /
• pp.156-161
• /
• 2005

Dynamic flow characteristics of a solenoid valve are affected by pressure difference in inlet and outlet of orifice, gas temperature, and supply voltage of a coil. In this paper, the dynamic flow characteristics for deviations of various conditions are studied Static and dynamic flow for variation on-time of a solenoid valve open signal are measured in basic bench test. The solenoid valve is applied to a compressed natural gas(CNG) engine test for validation of flow control performance. The experimental results show that flow of high pressure gas can controlled precisely by using a solenoid valve.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.4
• /
• pp.419-424
• /
• 2009

A Xenon feed system has been developed for a 300 W Hall-effect thruster intended for orbit maintenance of small satellite. The system can store about 2 kg of xenon gas at 150 bar and is capable of controlling the mass flow rate of the gas at 0.5 SCCM resolution. The performance of the system is verified with a laboratory experiment. It is confirmed that the operation of the feed system is successful at a pressure level of $1.0{\times}10^{-6}$ torr in the vacuum chamber.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2011.06a
• /
• pp.127-128
• /
• 2011

본 논문에서는 Flow 모니터링 및 제어, Graph 출력, Test, History 등의 기능을 제공하는 연소기 제어 시스템을 설계하고 구현한다. Flow 모니터링 및 제어 기능은 각 채널의 현재 유량을 표시하고, 제어할 수 있다. Graph 출력 기능은 현재 채널의 상태를 그래프로 나타낸다. Test는 현재 구성된 환경이 정상적으로 동작하는지 시험하는 기능을 제공하며, Setting은 각 채널의 채널명, Point set, Range, 허용오차를 설정한다. 그리고 History는 저장된 데이터를 읽어와 Error기록, 사용자에 의해 저장된 데이터, 24시간마다 자동 저장되는 데이터를 그래프로 표시해 준다. 본 논문에서 제안한 연소기 제어 시스템을 이용해서 실제 유량을 측정한 결과, 정확한 유량의 측정을 할 수 있었다.

• 월간 기계설비
• /
• s.103
• /
• pp.33-39
• /
• 1999

• Journal of the Korean Society of Propulsion Engineers
• /
• v.27 no.1
• /
• pp.58-67
• /
• 2023

Results of dry-run tests, cold-flow tests, and hot-firing tests performed to throttle a methane engine uni-element thrust chamber are covered in the paper. After installing flow control valves on the oxidizer and fuel supply lines of the methane engine combustion test facility, a number of dry-run tests were repeated so that the valves could reach set strokes quickly and stably. Then, cold-flow tests using liquid nitrogen and gaseous nitrogen were conducted to confirm the stable supply of the simulated propellants according to the valve control. Finally, using liquid oxygen and gaseous methane, hot-firing tests for fixed and continuous thrust control of 50% to 10% of the nominal thrust were successfully performed.

• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.117-119
• /
• 2008

본 논문은 부스터펌프 자동제어시스템의 성능평가를 위한 시험방법에 관한 것이다. 본 논문에서 제안하는 시험방법은 펌프 자체의 성능평가에만 의존했던 기존의 방법과 달리 펌프와 펌프를 제어하기 위한 자동제어장치까지 포함한 전체 시스템에 대한 성능평가를 할 수 있도록 한다. 본 시험방법은 부스터펌프 자동제어시스템을 설치하고, 토출 측에 전자제어밸브를 설치하여 이를 제어함으로써 물의 사용량 즉, 유량에 변화를 주게 된다. 이때 토출압력을 일정하게 유지하도록 설정된 자동제어시스템은 펌프를 제어하여 물을 토출 측으로 공급하게 되며 이를 통해 토출압력의 변화를 측정하는 방법이다. 이러한 시험방법에 있어서 정상상태특성시험, 가속 특성시험, 응답특성시험을 수행한다. 결과적으로 본 논문의 시험방법을 통해 전체 시스템에 대한 성능평가가 가능하며, 모든 시험과정을 자동화 할 수 있고 다양한 운전환경에 대한 유량변화를 짧은 시간 내에 적용하여 시험에 소요되는 시간을 단축할 수 있다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2013.01a
• /
• pp.107-110
• /
• 2013

본 논문에서는 좁은 수로에서의 3단계의 기울기와 2단계의 유량에서 수차의 흘수와 효율에 관한 실험을 수행하였다. 컴퓨터에 의하여 제어되는 자동화된 축소 실험 환경을 구성하고, 3단계의 기울기와 2단계의 유량 각각에 대하여 10단계의 흘수별 회전효율 데이터를 취득하고, 취득한 데이터를 이용하여 회전 효율을 분석하고, 전에 실험한 다른 논문의 결과와 비교하여 잘못된 결과들을 찾아내고, 유사하게 현상들의 동일함을 확인하며, 수작업 실험에서 밝혀내지 못한 현상들을 추가하여, 컴퓨터의 이용효과를 확인하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.8
• /
• pp.535-542
• /
• 2016

In this study, a model reference adaptive controller is developed to regulate the outlet air flow rate of centrifugal compressor for automotive supercharger. The centrifugal compressor is developed using the analytical based method to predict the transient behavior of operating and the designed model is validated with experimental data to confirm the system accuracy. The model reference adaptive control structure consists of a compressor model and a MRAC(model reference adaptive control) mechanism. The feedback control do not robust with variation of system parameter but the applied adaptive control is robust even if the system parameter is changed. As a result, the MRAC was regulated to reference air flow rate. Also MRAC was found to be more robust control compared with the feedback control even if the system parameter is changed.