• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.9 no.10
• /
• pp.763-774
• /
• 2019

A collaborative system supports collaboration among participants by providing functions such as group composition and management of data shared for collaboration. In recent years, research on collaborative services based on the blockchain technology has been done to guarantee the reliability of collaboration processes and outcomes. The diversity of the application domains in which collaborations are performed and the various characteristics of the participants in the collaboration group naturally leads to various forms of collaborative processes. In order for these processes to produce the desired outcome of the collaborative efforts, it is desirable to specify the appropriate collaborative process in advance, so that the participants can understand and agree on the process, carrying out the collaboration. In this paper, we propose a method to control flexible collaborative processes according to workflow specifications in the Ethereum-based collaborative service environment. The specification of the workflow for the designated task is stored in the Ethereum smart contract and the process of performing the task is controlled according to the stored workflow specification. For this, we introduce JSFlow which is a simple workflow specification method using JSON and an Ethereum library to utilize it.

• Applied Chemistry for Engineering
• /
• v.32 no.6
• /
• pp.640-646
• /
• 2021

In this study, pitch was synthesized using pyrolysis fuel oil (PFO). Coke with mesophase microstructure was then prepared from the synthesized pitch and its properties were evaluated. Pitch was synthesized by poly-condensation reaction, which is an endothermic reaction at a temperature above 400 ℃ because the PFO was mainly composed of molecules with two to three aromatic rings. The Coke reactor was composed of the pretreatment reactor, preheater for applying heat energy, and coke drum for inducing microstructure of coke. Coke was prepared from synthesized pitch by controlling the temperature of the preheater to 400~490 ℃, and properties were evaluated by polarization microscope, XRD and Raman spectroscopy. The coke prepared at a preheater temperature of 460 ℃ identified flow anisotropic microstructure, and the electrical conductivity was 72.0 S/cm due to high crystallinity. And the flow anisotropic coke showed approximately 2.2 times higher electrical conductivity than that of Super-P, a conductive carbon material.

• Journal of Bio-Environment Control
• /
• v.28 no.3
• /
• pp.225-233
• /
• 2019

In the summer season, natural ventilation is commonly used to reduce the inside air temperature of greenhouse when it rises above the optimal level. The greenhouse shape, vent design, and position play a critical role in the effectiveness of natural ventilation. In this study, computational fluid dynamics (CFD) was employed to investigate the effect of different roof vent designs along with side vents on the buoyancy-driven natural ventilation. The boussinesq hypothesis was used to simulate the buoyancy effect to the whole computational domain. RNG K-epsilon turbulence model was utilized, and a discrete originates (DO) radiation model was used with solar ray tracing to simulate the effect of solar radiation. The CFD model was validated using the experimentally obtained greenhouse internal temperature, and the experimental and computed results agreed well. Furthermore, this model was adopted to compare the internal greenhouse air temperature and ventilation rate for seven different roof vent designs. The results revealed that the inside-to-outside air temperature differences of the greenhouse varied from 3.2 to $9.6^{\circ}C$ depending on the different studied roof vent types. Moreover, the ventilation rate was within the range from 0.33 to $0.49min^{-1}$. Our findings show that the conical type roof ventilation has minimum inside-to-outside air temperature difference of $3.2^{\circ}C$ and a maximum ventilation rate of $0.49min^{-1}$.

• The Journal of the Korea Contents Association
• /
• v.19 no.1
• /
• pp.445-462
• /
• 2019

This paper illustrated the use of focus groups with adolescents and youth experts to enhance knowledge of anger, anger expression, and its coping strategies. Nine youth experts and 9 adolescents participated in the study. Analysis of the findings identified 12 meaningful elements, 34 sub-elements, and 138 descriptions. The meaningful elements were as follow: the lack of stable care, anger-provoking situations, a relationship between distorted thoughts and anger, physical and psychological symptoms, different types of anger expression, suppressed anger, difficulty of anger control, youth efforts to control anger, needs to implement appropriate anger expression, psychological mechanism of anger, effective ways to cope with anger, suggested by youth experts, needs of alternative anger management programs. Based on these findings, the study suggests various anger management alternatives, including ICT based cognitive-behavior anger management programs.

• Clean Technology
• /
• v.25 no.1
• /
• pp.19-32
• /
• 2019

As regional air pollution gets worse by the sulfur oxides emitted from various types of vessels passing through the many countries, the International Maritime Organization establishes the emission control areas and regulates sulfur dioxide in those areas. In order to satisfy these regional regulations, the fuel selection method and the exhaust gas post-treatment device are applied to the ships. Due to the economic reasons, the post-treatment method of exhaust gas for reducing the amount of sulfur oxides discharged is mainly preferred. The scrubber which is dominantly used in the ships are the spray type system where the sprayed liquid drops used for capturing the soluble sulfur dioxides in the exhaust gas. The performance of the spray type system depends on the size distribution of the sprayed droplets. In order to evaluate this performance, we designed counterflow type scrubber and cyclone scrubber and evaluated the desulfurization efficiency and the amount of droplet evaporation according to the size of each droplet by using computational fluid dynamics. The Eulerian-Eulerian analysis method was used because the scrubber had a gas-liquid two-phase flow inside the scrubber. When the diameter of the droplet was $100{\mu}m$, $300{\mu}m$, $500{\mu}m$ and $700{\mu}m$. As a result, both of scrubbers showed high desulfurization efficiency and low evaporation amount at $500{\mu}m$ and $700{\mu}m$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.638-643
• /
• 2021

Oil is used in various industries, including the agricultural sector, food industry, and functional cosmetics. These oils are chemically unstable and prone to oxidation when exposed to oxygen, light, moisture, or high temperatures. Therefore, various attempts have been made to encapsulate them so that they are not exposed to such environments. When oil is injected into a refrigerant with greater density, the oil can be encapsulated as it rises due to buoyancy caused by the density difference. In this study, oil encapsulation was simulated to find the optimal conditions for operating equipment using computational fluid dynamics (CFD) for multiphase flows. Water or serum can be used as a refrigerant. The viscosity of water is relatively small, and if it is used as a refrigerant, oil droplets can be produced well even if oil and water are continuously injected in the equipment. However, the viscosity of serum is very high, and if it is used, the oil is stretched out and does not leave the nozzle. The results show that when using serum as a cooling medium, oil encapsulation is possible if the injection is stopped for some time after instantaneous injection at high speed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.460-468
• /
• 2021

This study investigated the enhanced combustion efficiency of an "air-cooled combustion system" with single F.D. fan, and performed a numerical analysis for the operation and design conditions to increase the combustion efficiency. The combustion efficiency in an actual combustor was compared before and after the structure modification. Numerical analysis for application of a single fan revealed the difficulty of forming a turbulence for circular combustion conditions. This is because the supply ratio of combustion air supplied into 2 flow paths becomes irregular in the combustion furnace due to a change in friction force and pressure in each flow path. Subsequently, two methods of supplying air into the combustion furnace were analyzed numerically to obtain the optimal combustion conditions of an air-cooled combustion system. The first method involved injecting the preheated combustion air after a 180~360 degree rotation from the outer wall, whereas in the second method, the combustion air was injected into the combustion furnace in a tangential direction after primary heat exchange outside the combustion furnace, by applying a rotatable vane structure in the combustion furnace. Results reveal that application of a single F.D. fan to the air injection into a rotatable combustion furnace is desirable for optimization of the combustion conditions for applying a duct structure having a dual cooling wall for the cooling of the outer wall of the combustion furnace, and for maintaining perfect mixing in the combustion furnace. We therefore confirmed enhanced combustion efficiency by comparing the actual combustion efficiency before and after structure modification.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.2
• /
• pp.216-239
• /
• 2021

Inlay (入絲), a poetic technique of digging grooves in the surface of crafts and decorating them with metal materials, was used throughout the royal daily routines, ceremonies and government officials of the Joseon Dynasty. The government-owned handicraft industry in the Joseon Dynasty was composed of craftsmen belonging to central and local government offices and was operated mainly by government-owned craftsmen. The inlay craftsman was transferred to the central government office and was in charge of inlay poetry for crafts. The current records of Korean inlay craftsmen are concentrated in the state-owned handicraft industry. In the state-owned handicraft industry, the government offices of inlay craftsmen can be divided into Kongjo (工造), Sangeuiwon (尙衣院), and the military. Here the election of a temporary government office for airspace is added. The government offices and military inlay craftsmen who use inlay crafts are assigned, and the inlay craftsmen are placed separately in the temporary office where the fine division of labor is developed. It can be made by utilizing craftsmen. The operation of these production systems was indispensable in pre-modern Korean society, where crafts had to be produced by hand. In this paper, we investigated the roles and job types of craftsmen in the state-owned handicraft industry during the Joseon Dynasty, focusing on inlay craftsmen. Although the details applied to the characteristics and materials of the field, labor supply and demand, etc. are different, Korea pursued crafts for various purposes through craftsmanship within the framework of the basic state-owned handicraft policy . The institutional equipment for implementation was almost common. We believe that adding and analyzing some literature records and relics will help us to study the crafts of the Joseon era in more detail.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.2
• /
• pp.35-43
• /
• 2011

Confined aquifer, which is separated with upper clayey or silty materials, is partially distributed at the depths of the sediments in Ddan-sum area on the lower Nakdong river. Measurements of groundwater levels at 13 sites explain that groundwater flow shows seasonally various due to seasonal rainfall and agricultural water use. From 9 long-term monitoring data of groundwater levels at 7 sites, 3 types of groundwater levels time series can be classified using principal component analysis. The first type is seen in the center of Ddan-sum and has a round-shape graph due to a weak response to stream water levels. The second type exists in the outer part of Ddan-sum and shows sharply peak-shape graph due to a rapid and strong response to stream water levels and rainfall. The last type, which is seen in a deep layer, has a periodicity by tital effect. From geochemical analysis at each monitoring sites, [$Ca-HCO_3$] type happens in the center of Ddan-sum far from Nakdong river, and [$Na-HCO_3$] and [$Ca-SO_4(Cl)$] types exist in the outer of Ddan-sum affected by river quality.

• (The) Research of the performance art and culture
• /
• no.35
• /
• pp.287-338
• /
• 2017

Gojong' Birth Anniversary Memorial Banquet in the 1910s was forced to be performed differently from the performance style in Joseon Dynasty period that featured a harmonious majestic beauty of etiquette music. The banquet was separated into three different sessions of ceremony, luncheon and performance', which clearly revealed a distinctive pattern of etiquette music. The performance was accompanied by the dinner party or was lightly implemented as part of evening entertainment. With the use of the term entertainment, the performances belonging to this category fell into nothing but something to enjoy, amusement, fun and play. The contents of such performances were not closely woven into the fabric of the entire banquet but were individualized and scattered in a way of putting the performances in a state of flux in line with the circumstances. Therefore, it became increasingly hard to expect a high degree of completion and solid structure of performances. The items of performance included western music, popular vocal music, popular instrumental music, magic, and film, which were not played in traditional court banquet in the presence of Gojong rather than traditional music and dance performed in court. In other words, the court performance could not maintain its traditional heritage but was transformed into a mixture of popular performance and new forms of art. It was driven by the Japanese imperialism toward the atmosphere of entertainment in oblivion of tradition but not toward the external extension of court performances.