• The Journal of Engineering Geology
• /
• v.9 no.1
• /
• pp.1-15
• /
• 1999

An artificial recharge test was performed to analyze the source of seepage observed inside the Songsanri tombs Kongju during the rainy season. In order to simulate simulate the test, a two-dimensional unsaturated groundwater flow model was developed. By the measured water level variation in the observation wells and in the artificail water tank, the model was cailbrated to estimate the model parameters such as fitting parameters in the constitutive relations(n and $\alpha$), the saturated volumetric water content, the residual volumetric water content, and the saturated hydraulic conductivity. Using the calibrated parameters, the recharge test was simulated. The results of the test and simulation show that the major source of the seepage is the downward groundwater flow through cracks in the protection layer the tombs. It was also analyzed by the steady state simulation that, with a perfect protection layer, a long-term precipitation that, with a perfect protection layer, a long-term precitation could cause only 10% increase of the effective saturation around the north side of the Muryong royal tomb by infiltration of the unsaturated groundwater from the North. Therefore, it is concluded that the most urgent protection plan for the tombs with respect to seepage is to reconstruct an effective waterproof-layer rather than a trenched drainage system.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.6
• /
• pp.466-473
• /
• 2011

The buoyancy and initial momentum fluxes make near-field dominated by buoyant jet when thermal discharge releases underwater. In order to estimate prediction capabilities of those near-field phenomena, non-hydrostatic RANS applied CFD(Computational Fluid Dynamic) model was used. Condition of model was composed based on past laboratory experiments. Numerical simulations carried out for the horizontal buoyant jet in the stagnant flow and vertical buoyant jet into crossflow. The results of simulation are compared with the terms of trajectory and dilution rate of laboratory experiments and analytic model(CorJET) results. CFD model showed a good agreement with them. CFD model can be appropriate for assessment of submerged thermal discharge effect because CFD model can resolve the limitations of near-field analytic model and far-field quasi 3D hydrodynamic model. The accuracy and capability of the CFD model is reviewed in this study. If the computational efficiency get improved, CFD model can be widely applied for simulation of transport and diffusion of submerged thermal discharge.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.118-118
• /
• 2017

4대강 사업으로 인하여 장래 치수 및 물부족현상과 가뭄에 대비한 용수 확보를 위해 하도준설과 보의 설치, 중소규모댐 건설, 농업용저수지 증설 등이 진행되었다. 그중 낙동강에는 8개 대형보가 건설되었다. 하지만 보 건설로 인하여 주변 지역 지하수위가 상승하여 주변 농경지나 저지대가 침수될 가능성이 있어 4대강 사업의 문제점의 하나로 지적되어 왔다. 이에 본 연구에서는 낙동강 유역에 건설된 보로 인하여 상승한 하천수위가 보 주변지역에 미치는 영향을 알아보기 위하여 8개보 주변의 연구대상지역을 선정하고 지하수 모델(Visual-MODFLOW)을 이용하여 보 관리수위 및 함양량 변화에 따른 지하수 유동과 지하수 변화를 분석하였다. 각 연구대상지역별 지하수위 변동특성 분석 순서는 보 건설 후(현재상태)에 대하여 정류상태 보정을 실시한 후 보 관리수위 시나리오를 정하고 그에 따른 분기별 함양량을 적용하여 부정류 모의를 실시하였다. 그 결과 각 연구대상지역의 지하수위는 낙동강 하천수위와 비슷하게 형성되는 것으로 평가되었으며, 낙단보의 경우 분기별 지하수위 변화가 0.1m ~ 0.2m로 함양량 변화에 따른 지하수위 변동이 가장 작게 평가되었다. 상주보의 경우 분기별 지하수위 변화가 1.5m ~ 2.1m로 함양량 변화에 따른 지하수위 변동이 가장 큰 것으로 평가되었다. 이러한 지하수위 변화는 하천주변 농가의 재배 작물 수확량 및 품질에 직접적인 영향을 줄 수 있어 농번기인 2분기(4월 ~ 6월)와 4분기(10월 ~ 12월)의 경우 보 관리수위를 주변 재배작물에 따라 운영한다면 보 건설로 인한 주변 지하수위 상승으로 인한 영향을 최소화 할 수 있을 것으로 판단된다. 향후 한강, 금강, 영산강에 건설된 보 주변에 대한 지하수위 변화특성 연구가 필요할 것으로 판단되며 본 연구 결과를 바탕으로 보 관리수위 결정의 기초자료로 활용할 수 있을 것이라 판단 된다.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.4
• /
• pp.73-81
• /
• 1994

The source and source/dipole distribution methods using 3-dimensional panel method have been widely used for ship motion analysis. When these methods are used, large errors in the predicted hydrodynamic coefficients are introduced around the irregular frequencies caused by the resonance of imaginary internal flow. Therefore, the irregular frequencies need to be removed for an accurate prediction of ship motion. This paper adopts 3-dimensional translating and oscillating Green function derived by Wu. The adaptive integration method, stretching transform and stationary phase method are used for the calculation of the calculation of Green function and the integral equation is derived by distributing the Green function n ship surface and inner free-surface. The condition of zero normal velocity, that is, wall condition on inner free-surface has been successfully used for the removal of irregular frequencies in oscillating problems. The calculations are carried out for series 60($C_B=0.7$) vessel and the results are compared with those of other theoretical analyses and experiment.