• 대한기계학회논문집
• /
• 제19권10호
• /
• pp.2586-2594
• /
• 1995

Two phase flow phenomena are observed in many industrial facilities and make much importance of optimum design for nuclear power plant and various heat exchangers. This experimental study has been investigated the classification of the flow pattern, the local void distribution and convective heat transfer in swirl and non-swirl two phase flow under the isothermal and nonisothermal conditions. The convective heat transfer coefficients in the single phase water flow were measured and compared with the calculated results from the Sieder-Tate correlation. These coefficients were used for comparisons with the two-phase heat transfer coefficients in the flow orientations. The experimental results indicate, that the void probe signal and probability density function of void distribution can used into classify the flow patterns, no significant difference in voidage distribution was observed between isothermal and non-isothermal condition in non-swirl flow, the values of two phase heat transfer coefficients increase when superficial air velocities increase, and the enhancement of the values is observed to be most pronounced at the highest superficial water velocity in non-swirl flow. Also two phase heat transfer coefficients in swirl flow are increased when the twist ratios are decreased.

• 설비공학논문집
• /
• 제10권5호
• /
• pp.619-629
• /
• 1998

An experimental work was conducted to investigate a feasibility of simultaneous measurement of gas-liquid two-phase flowrates with double orifice plates using air and water. The tests were carried out under the atmospheric pressure and at the ambient temperature using two different tube sizes. Qualities of an air-water flow in the present study have values less than 0.1 and thus the mixed flow showed bubbly, plug, slug flow regimes. The probability density function (PDF) and the power spectral density function (PSDF) of the instantaneous pressure drop traces for the flow regimes were obtained. It is found that some distinctive features exist in the distribution of these functions, depending upon the two-phase flow pattern. The time-averaged value of the instantaneous pressure drop increases with increasing gas and liquid flowrates, showing a single-valued function for the total mass flowrate and the quality. It is also found that the two-phase discharge coefficient exhibits a consistent trend for variation of dimensionless parameters such as the superficial velocity ratio and the gas Reynolds number. The results indicate that simultaneous measurement of two-phase flowrate may be possible based upon a statistical analysis of the instantaneous pressure drop curves monitored using double orifice plates.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2583-2588
• /
• 2008

In the present experimental study, the regime limit and pressure drop of dry-plug flow (dry wall condition at the gas portions of plug flow) in round mini-channels has been investigated. The air-water mixture was flowed through the round mini-channels made of Teflon, where the tube diameters ranged from 1.26 to 2.06 mm. For the present experimental range, with decreasing of the tube diameter, the transition between the plug and slug flows (wet and dry) happened at the higher gas superficial velocity region, which were in good agreement with the previous flow pattern maps tested. On the other hand, the transition between the wet- and dry-plug flows was little affected by the change of the tube diameter. In the pressure drop of dry-plug flows, among the correlations tested, the Lee and Lee's (2008) correlation best fitted the measured pressure drop data within the mean deviation of 10% for the present experimental range.

• 설비공학논문집
• /
• 제14권9호
• /
• pp.756-765
• /
• 2002

Experimental work was performed on the flow characteristics of R-22 and R-l34a in small diameter tubes. The experimental apparatus was made up of liquid pump, pre-heater, sight-glass, condenser and measurement instruments. The sight-glass for flow pattern observations was located at the outlet of the pre-heater. The experiment was carried out to show the flow characteristics of R-22 and R-l34a. Data were taken with test conditions in the following ranges; the mass flux was ranged from 100 to 1,000 kg/$m^2s$, the saturation temperature was $30^{\circ}C$ and the vapor quality was ranged from 0.1 to 0.9. The main results were summarized as follows; In the flow patterns during evaporation, the annular flow in a 2 mm inner diameter tube occurred at a relatively lower quality and mass velocity, compared to the flow in a 8mm inner diameter tube. The evaporation flow in small diameter tubes has been shown major deviations with the Mandhane, Taitel-Dukler's and Wambs-ganss' flow pattern maps but it was similar to the Dobson's flow pattern map.

• 에너지공학
• /
• 제21권4호
• /
• pp.419-426
• /
• 2012

본 연구에서는 기기 스케일 2상 유동(Two-phase flow) 해석 코드 CUPID를 사용하여 CANDU 원자로의 칼란드리아 용기 내부 감속재의 열수력 거동을 분석하기 위한 사전연구를 수행하였다. 먼저, Stern 연구소에서 수행한 단상유동 실험 3종류를 이용하여 CUPID 코드를 검증하였다. 칼란드리아 관다발 영역 격자생성의 복잡성을 피하기 위하여 다공성 매질 모델을 해당 영역에 적용하였고, 다공성 매질 영역의 유동 저항은 실험에서 얻은 관계식을 이용하여 계산하도록 하였다. 계산결과, CUPID 코드는 칼란드리아 용기 내부의 강제 및 자연 대류의 혼합 유동 양식을 성공적으로 예측하였다. 다음으로 2상 유동이 발생하는 경우를 해석하였다. 이들 계산을 통해 CUPID 코드의 CANDU 원자로 감속재 해석 능력을 보였다. 또한, 국부 과냉각 여유도를 예측하는데 사용할 수 있는 유입유량 대비 칼란드리아 용기의 국부 최대 감속재 온도 그래프를 제시하였다.

• 대한기계학회논문집B
• /
• 제26권11호
• /
• pp.1559-1569
• /
• 2002

In order to investigate the characteristics of electromagnetic flowmeter in two -phase flow, an AC electromagnetic flowmeter was designed and manufactured. In various flow conditions, the signals and noises from the flowmeter were obtained and analyzed by comparison with the observed flow patterns with a high speed CCD camera. The experiment with the void simulators in which rod shaped non-conducting material was used was carried out to investigate the effect of the bubble position and the void fraction on the flowmeter. Based on the results from the void simulator, two -phase flow experiments encompassed from bubbly to slug flow regime were conducted. The simple relation $\Delta$ $U_{TP}$ = $\Delta$ $U_{SP}$ (l-$\alpha$) was verified with measurements of the potential difference and the void fraction. Due to the lack of homogeneity in a rent two -phase flow, the discrepancy between the relation and the present measurement was slightly increased with void fraction and also liquid volumetric flux jf. Whereas there is no difference in the shape of the raw signal between single-phase flow and bubbly flow, the signal amplitude for bubbly flow is higher than that for single -phase flow at the same water flow rate, since the passage area of the water flow is reduced. In the case of slug flow, the phase and the amplitude of the flowmeter output show dramatically the flow characteristics around each slug bubble and the position of a slug bubble itself. Therefore, the electromagnetic flowmeter shows a good possibility of being useful for identifying the flow regimes.ul for identifying the flow regimes.

• 해양환경안전학회지
• /
• 제16권1호
• /
• pp.11-20
• /
• 2010

굴 양식 산업은 우리나라의 대표적인 양식수산업으로서 중요한 역할을 수행하여 왔지만, 최근에는 수출 감소, 국내 내수시장 소비의 한계, 양식 환경 악화와 같은 여러 문제에 직면하여 있다. 적정하고 지속적인 굴 생산은 어장환경의 공간정보를 기반으로 하는 적지 선정을 통하여 달성 가능하고, 양식장의 적지 선정은 양식장의 성공적 개발에 중요한 열쇠이며, 지속가능한 개발에 절대적 영향을 미친다. 이 연구는 GIS 기반의 다중 평가 방법을 이용하여 수하식 굴 양식장의 적지를 규명하고자 하였다. 대부분의 인자들은 GIS에서 보간법에 의해 추출되었고, 여덟 개의 환경 인자들이 두 가지 기본 서브모델로 그룹화 되었다. 이는 굴 성장에 관련된 인자(수온, 염분, 해수유동, 클로로필 a)와 양식장 주변 환경에 관련된 인자(저층 DO, 총유기탄소, 퇴적물 산휘발성 황화물, 저서군집 다양도) 등으로 구성되어 있다. 적합 점수는 가장 적지인 8점에서부터 가장 적합하지 못한 1 점까지의 규모로 가점되었으며, 총 80.1%의 잠재 지역이 가장 높은 점수 5점과 6점으로 채점되었다. 이 지역들이 거제한산만에서 굴 양식을 위한 가장 최적의 조건을 가지는 것으로 나타났으며, 이러한 GIS 기반의 적지 선정 기법은 공간적인 의사 결정을 지원함으로서 어장관리시스템으로 활용될 수 있다.

• 한국유체기계학회 논문집
• /
• 제2권3호
• /
• pp.37-44
• /
• 1999

In a screw-type centrifugal pump, the pump head deteriorates from single-phase flow to the choke due to an increased air entrainment at a wide tip clearance compared to that of a narrow tip clearance. Moreover, at a narrow tip clearance, the pump head became partially higher in a two-phase flow than that of a single-phase flow near the best efficiency point in low void fraction region. Therefore, we observed the internal flow pattern by using a stroboscope and we measured the mean size of bubbles from the images obtained with a high speed camera. Then, we investigated the influences of the mean size of bubbles, tip clearances and flow patterns on pump performance.

• Journal of Chest Surgery
• /
• 제31권6호
• /
• pp.638-641
• /
• 1998

저자등은 36세 남자환자에서 재발성 폐 근상피종을 경험하여 보고하는 바이다. 이 종양은 Dardick에 의한 근상피종의 형태학적 분류에 근거하여 볼때, 대ㆍ소 타액선에서 발견된 근상피종들에서 기술된 조직학적 특성과 동일한 종양이었다. 환자는 흉벽 일부를 포함한 완전 절제 수술을 시행 받았다. 종양은 비교적 잘 싸여 있었고, 광학 현미경상 주로 형질세포양 세포와 투명세포로 구성되어 있었고, 고형 성장 양식을 보이고 있었다. 면역세포화학적, 전자현미경적, 그리고 유동 세포 분석법에 의한 검사를 실시하였고, 폐 근상피종에 합당한 소견을 확인할 수 있었다.

• 한국미생물생명공학회:학술대회논문집
• /
• 한국미생물생명공학회 1986년도 추계학술대회
• /
• pp.532.1-532
• /
• 1986

유산균이 생성하는 polysaccharide 에 관한 연구의 일환으로서 L. casei YIT 9018 SKD-0007, L. bulgaricus SKD-0003, sir. faecalis SKD-1007, str. thermophilus SKD- 1005, str. thermophilus 510 SKD-1006등을 탈지유에 배양하면서 polysaccharide 생성에 의한 배양액의 점도 변화를 검토하였다. 이러한 다당류가 Antitumor로서의 활성과 제암효과를 가지며 인체내의 생리효과를 고양시킨다고 보고되어 있는바 다당류가 최대로 생성되는 조건을 찾는 것을 본 실험의 목적으로 하였다. 다당류의 생성을 측정하는 방법으로서 배지로는 10% 환원탈지유와 12% 환원전지유를 선택하였으며 Brookfield Viscometer를 사용하여 배양액의 점도를 경시적으로 측정하였다. 시험균 중에서 str. thermophilus 510 SKD-1006이 가장 높은 점도를 나타내었는데 41$^{\circ}C$ 배양 5일째에 5000 cps였고 다른균에 비해서 1000cps이상 높았다. 접종량이 증가할수록 점도도 증가하였으며 14%이상의 탈지유 농도에서는 7000cps를 나타냈다. 탈지유와 전지유 배양액 모두 의가소성 유체의 유동 양식을 나타내었는데 12% 환원전지유 배양액은 최대점도값이 2500 cps에 불과하였으며 배양 2일째에 최대점도 값에 도달하여 그 이후로 급격한 감소현상을 보였다.