• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.3
• /
• pp.145-151
• /
• 2003

Using computational fluid dynamics (CFD) method, we investigated three-dimensional fluid flow field and particle movement with respect to the injected gas flow rate variation in typical cyclone separator system. The results of numerical investigation were deduced by coupling the analysis of fluid flow field with Wavier-stokes equation and the tracking of the particle trajectory with Langrangian approach. It was shown that the increasing of injected gas flow rate resulted in the increasing of pressure loss in the separator. This change of inner pressure had an effect on an aspect of the fluid flow in the separator. Particle movement was determined by fluid flow in the separator and was fully depended on a diameter of particles under the fixed flow rate. Increasing of injected gas flow rate was led to an increasing of the trace of particle, so the particles moved to the lower part of the separator. For this reason, the minimum diameters of the particles were decreased and increased the separation rate under the fixed particle diameter. In conclusion, the changes of injected gas flow rate have an important factor to the fluctuation of the fluid flow field and particle trajectory in the separator.

• Journal of the Korean Institute of Gas
• /
• v.20 no.3
• /
• pp.1-11
• /
• 2016

Production data from hydraulically fractured well in coalbed methane (CBM) reservoirs was analyzed using decl ine curve analysis (DCA), flow regime analysis, and flowing material balance to forecast the production performance and to determine estimated ultimate recovery (EUR) and timing for applying the DCA. To generate synthetic production data, reservoir models were built based on the CBM propertie of the Appalachian Basin, USA. Production data analysis shows that the transient flow (TF) occurs for 6~16 years and then the boundary dominated flow (BDF) was reached. In the TF period, it is impossible to forecast the production performance due to the significant errors between predicted data and synthetic data. The prediction can be conducted using the production data of more than a year after reached BDF with EUR error of approximately 5%.

• The Journal of Engineering Geology
• /
• v.30 no.2
• /
• pp.131-145
• /
• 2020

The construction on these flimsy ground, activation of unsymmetrical surcharges, can often cause of the embankment road lateral flow or the destruction of the activities. In this study, the stability of the abutment pile foundation installed on soft ground and its behavior has been evaluated. The behavior of the abutment pile foundation under lateral flow was studied by verifying the behavior and reinforcement effects of the abutment pile foundation of previous studies about horizontal loads acting on the pile due to the lateral flow of the ground by performing finite element analysis. As a result of the consolidation analyses, the undrained cohesion or the strength of the soft ground, was increased by about 1.1 to 1.8 times by the increase in the strength of the soft ground according to the degree of consolidation. It is deemed reasonable to use 3.8 cm of the allowable displacement both economically and constructively, but considering the importance of the structure and the uncertainty of the ground, measurement shall be carried out during construction and thorough safety management of the lateral flow should be done.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.536-542
• /
• 2017

A great deal of difficulty is encountered in the thermo-mechanical analyses of nozzle assembly for solid propellant rocket motors. The main issue in this paper is the modeling of the boundary conditions and the connections between the various components-gaps, relative movements of the components, contacts, friction, etc. This paper evaluated the complex phenomena of nozzle assembly during burning time with co-simulation which include fluid, thermal surface reaction/ablation and structural analysis. The validity of this approach was verified by comparison of analysis results with measured strains.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.4
• /
• pp.36-43
• /
• 2018

A great deal of difficulty is encountered in the thermo-mechanical analyses of nozzle assemblies for solid propellant rocket motors. The main issue in this paper is the modeling of the boundary conditions and the connections between the various components-gaps, relative movements of the components, contacts, friction, etc. This paper evaluates the complex phenomena of nozzle assemblies during burning time with co-simulations that include fluid, thermal surface reaction/ablation, and structural analysis. The validity of this approach is verified via comparison of analysis results with measured strains.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05c
• /
• pp.253-258
• /
• 1996

본 연구는 Zr-2.5wt%Nb합금의 고온변형특성중 특이한 유동응력의 변화거동인 어닐경화와 유동연화의 기구에 대해 고찰하였다. 연구결과에서 이러한 고온변형특성은 온도와 다단변형도중의 어닐링 시간에 영향을 받는 것으로 나타났으나 분위기 영향은 없는 것으로 나타났다. 즉, 변형 온도와 동일온도인 85$0^{\circ}C$에서 단시간인 5분동안 어닐링을 했을때 경화현상이 일어났다. 미세조직을 관찰한 결과 다단열간압연된 후의 미세조직과 집합조직은 다단열간압연된 미세조직과 집합조직과 직접적인 상관관계를 가진 것으로 나타났다. 어닐경화현상은 다단고온변형이 궁극적으로 변형시효와 유사한 효과 즉, 중간어닐링 동안에 Zr-2.5wt%Nb내의 불순물 원자와 열간압연시에 형성된 전위구조와의 강력한 인력형 상호작용하여 substructure가 안정화되기 때문이며 유동연화는 재결정으로 인한 유동응력의 감소인 것으로 사료된다.

• Tunnel and Underground Space
• /
• v.10 no.2
• /
• pp.173-179
• /
• 2000

The influence of the plastic flow rules on the elasto-plastic behaviour of a discrete joint element was investigated by performing the numerical direct shear tests under both constant normal displacement and normal displacement conditions. The finite interface elements obeying Plesha’s joint constitutive law was used to allow the relative motion of the rock blocks on the joint surface. Realistic results were obtained in the tests adopting the non-associated flow rule, while the associated flow rule overestimated the joint dilation. To overcome the computational drawbacks coming from the non-symmetric element stiffness matrix in the conventional non-associated plasticity, the symmetric formulation of the tangential stiffness matrix for a non-associated joint element was proposed. The symmetric elasto-plastic matrix it derived by assuming an imaginary equivalent joint with associated flow rule which shows the same plastic response as that of original Joint with non-associated flow rule. The validity of the formulation was confirmed through the numerical direct shear tests under constant normal stress condition.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.154-154
• /
• 2003

고품질의 합금강 생산 시 가장 큰 영향을 미치는 레이들정련은 고온 하에서 반응 및 유동이 일어나므로 실제조업 직접관찰이나 측정이 대단히 어려울 뿐만 아니라, 수많은 조업인자와 상호 결합되어 있기 때문에 최적의 작업조건을 찾는데 많은 시행착오를 겪는다. 본 실험에서는 직접 조업하는 조건과 가장 부합하는 수모델 실험 및 Flow 3D를 이용한 수치해석 방법으로 비용의 절감 및 실험에 대한 위험부담 등 시행착오를 최소화하면서 최적의 작업조건을 도출하여 고품질 합금강 생산성과 process 효율성의 극대화를 찾을 수 있다. 따라서 본 연구에서는 슬래그의 물성(슬래그 양, 점도)을 고려한 gas bubbling 조건(가스유량, 유체높이, ladle 크기, 단공nozzle, porous plug 위치)에 따른 용강의 교반특성 및 용강의 슬래그 혼입 거동을 조사함으로써 고청정 용강 제조를 위한 최적 gas bubbling 조건을 설정하기 위한 수모델 실험과 수치해석 연구를 실시하였다. 수모델 실험을 통한 기포형성 거동과 용강의 교반특성에 대한 현상론적 연구와 병행하여, 유동장 측면에서 이상유동을 가정한 수치해석을 통해 실제 용강 래들 내에서의 거동을 정량화 하고자 한다.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.5
• /
• pp.173-180
• /
• 2001

이방압밀이 실트질모래의 정적재하에 의한 유동파괴거동에 미치는 영향을 연구하기 위하여 비배수삼축압축시험을 수행하였다. 이를 위하여 상대밀도가 약 17%인 공시체를 습윤다짐방법에 의해서 성형하고 4가지의 압밀응력비, 1.0, 0.7, 0.55, $K_{o}$ 로서 압밀시켰다. 시험결과로서 정상상태선은 p-q 공간상에서 압밀응력비에 관계없이 유일한 직선이며 collapse line의 기울기는 압밀응력비가 증가함에 따라 선형적으로 감소한다는 사실을 보여준다. 또한, 유동파괴거동을 보이는 느슨하게 다져진 실트질모래의 잔류강도($S_{us}$ )와 첨두강도($S^{p}$ )와의 관계는 압밀응력비의 크기에 관계없이 $S_{p}$ /$p_{c}$ = $A_{L}$ +$B_{L}$ ($S_{us}$ /$p_{c}$ )로 표현되는 일반식으로 나타낼 수 있으며 계수 $A_{L}$ 및 $B_{L}$은 압밀응력비의 크기에 따라 선형적으로 변하는 경향을 나타낸다.

• Korean Journal of Food Science and Technology
• /
• v.36 no.5
• /
• pp.740-743
• /
• 2004

Rheological properties of gamma-irradiated arrowroot starch was examined to utilize as fundamental research data far processing. Irradiated arrowroot starch solutions (3, 4, 5, 6%) were gelatinized at $95^{\circ}C$ for 40 min, and its flow properties measured using rheometer at $30^{\circ}C$ and 10 to 200 rpm rotation rate. Rheological parameters of irradiated arrowroot starch gelatinized solution were calculated using Herschel-Bulkley equation. Gelatinized arrowroot starch solutions irradiated at $0^{\circ}C$ and 5kGy showed pseudoplastic fluid behavior, while those irradiated at 10, 20, and 30kGy were the dilatant with ${\tau}_y=0$ (yield stress).