• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.2
• /
• pp.137-150
• /
• 1997

The problem of electromagnetic coupling into a thin conducting wire through a slot in an infinite conducting is analyzed by use of MPIE(mixed potential integral equation) and two- dimensional moment method using subsectional(rooftop) basis functions. The equivalent circuit is derived using a center-repesentation method which is valid in a narrow slot case. The equi- valent magnetic currents on the slot and the induced currents on the wire are caculated respec- tively, for the TM wave is incident upon the slot with arbitrary angle of incidence. The theoretical transmission coefficients of transmission line which is composed of thin-wire and infinite conducting plate with a narrow slot are compared and found to be in good agreement with experimental results.

• Women's Health Nursing
• /
• v.13 no.3
• /
• pp.157-164
• /
• 2007

Purpose: This study was done to determine the effect of nursing interventions on the knowledge of cervical cancer, and health beliefs, self efficacy and rate of rescreening compliance. Method: This was a nonequivalent control group pretest-posttest design. The subjects were 93 women who had experienced cervical cancer screening in S city and were randomly assigned to the experimental or control group. Intervention tools were a screening record pocket book, phone-coach. and watching a video(17mins). The data was collected from April to December, 2003 and analyzed using an $X^2-test$. t-test and ANCOVA. Results: The 1st hypothesis, "The Posttest know ledge score of the experimental group will be significantly higher than that of the control group" was supported(F=11.16, p= .001). The 2nd hypothesis, "The Posttest health belief score of the experimental group will be significantly higher than that of the control group" was not supported(F=3.38, p= .069). The 3rd hypothesis, "The Posttest self efficacy score of the experimental group will be significantly higher than that of the control group" was supported(F=4.36, p= .040). The 4th hypothesis, "The Rescreening compliance rate of the experimental group after the nursing intervention will be significantly higher than that of the control group" was supported($X^2=3.45$, p= .050). Conclusion: This nursing intervention was effective in increasing the knowledge of cervical cancer, and self efficacy percentage of rescreening compliance. Therefore I think this intervention can be used for promoting the rescreening compliance of women.

• The Journal of the Korea Contents Association
• /
• v.13 no.11
• /
• pp.968-978
• /
• 2013

The purpose of this study is to explore the strategies for application of e-portfolio for improving teaching efficacy of pre-service teachers. 35 pre-service teachers wrote reflection papers and uploaded their data to their personal e-portfolio during 10 weeks. They participated in two teaching efficacy surveys which were conducted before and after using e-portfolio. Twelve participants were interviewed regarding their experience and perceptions of e-portfolio. As the result of compared-sample tests, teaching efficacy increased statistically significantly. According to the students' interview, the pros and cons of e-portfolio were identified and the strategies for application of e-portfolio were suggested for improving teaching efficacy of pre-service teachers.

• Korean Journal of Cognitive Science
• /
• v.18 no.3
• /
• pp.285-303
• /
• 2007

Transient attention impairs observers' temporal resolution in a cued location. This detrimental effect of attention was ascribed to inhibitory connections from parvocellular to magnocellular neurons [1]. Alternatively, the difficulty might arise because attention facilitates the temporal summation of two successive stimuli. The current study examined this hypothesis by manipulating the luminance polarity of the stimuli against a background. Attention should not modulate temporal summation of two anti-polar stimuli because these are processed in separate channels. Indeed, observers judged the temporal order of two successive stimuli better in the cued location than in the uncued location when the stimuli were opposite in polarity, but temporal resolution was worse in the cued location when the stimuli had the same polarity. Thus, attentional effects on temporal resolution may be attributed to temporal summation rather than parvocellular inhibition of magnocellular activity.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.2
• /
• pp.106-113
• /
• 2017

Attitude determination algorithms for aircraft and land vehicles use earth gravitational vector and geomagnetic vector; hence, magnetometers and accelerometers are employed. In dynamic situation, the output from accelerometers includes not only gravitational vector but also motional acceleration, thus it is hard to determine accurate attitude. The acceleration compensation method treated in this paper solves the problem to compensate the specific force vector for motional acceleration calculated by a GPS receiver. This paper analyzed the error from the corrected vector regarded as a constant by conventional acceleration compensation method, and improve the error by rederivation from measurements. The analyzed error factors and improvements by the proposed algorithm are verified by computer simulations.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.331-335
• /
• 2011

흔히 진흙으로 불리는 점착성 유사는 모래 등의 비점착성 유사와는 다른 특성을 보인다. 가장 큰 특징은 점착력에 의해 서로 엉겨 붙어 큰 덩어리(플럭)를 형성하고 다시 큰 플럭이 파괴되는 과정인 응집현상(Flocculation Process)을 보인다는 것이다. 이 응집현상의 과정을 통해 플럭은 크기 및 밀도를 지속적으로 변화시킨다. 크기 및 밀도의 변화는 플럭의 침강속도를 변화시켜 점착성 유사의 부유, 퇴적, 이송, 확산의 과정에 직접적인 영향을 미친다. 응집현상은 플럭의 침강속도 뿐 아니라 부피농도와 질량농도 사이의 비선형적 관계를 야기하여 흐름 운동량 방정식 유도, 난류의 모형화 등에서도 비점착성 유사와 다른 방향으로 진행된다. 점착성 유사가 우세한 지역의 또 다른 특성은 자기하중에 의한 압밀현상에 따라 발생하는 가변적인 한계소류력이다. 따라서 점착성 유사의 이동을 모형화 하는 과정에서는 가변적인 침식율의 가정 등을 통해 이에 대한 고려가 반드시 이루어져야 한다. 흐름의 운동량 방정식 및 난류 모형에서는 플럭의 부피 농도와 질량농도가 각 항의 물리적 의미에 부합하도록 개별적으로 선택 및 적용되어야 질량보존의 문제 등으로 발생할 수 있는 계산상의 오류를 배제할 수 있다. 적용 결과, 점착성 유사가 우세한 지역에서 나타나는 높은 부유 및 흐름정체기에서의 부유사 존재 등의 특성이 점착성 유사 이동을 위한 모형에서 보다 합리적으로 계산된다는 사실이 확인되었다. 그리고 비점착성 유사에 적합한 이동 모형이 점착성이 우세한 지역에 적용될 경우, 상황에 따라 유사량을 과대 및 과소 산정할 수 있다는 결론이 도출되었다. 조류의 영향이 존재하는 하구부의 경우에는 조류의 형태와 비대칭성에 따라 유사량의 차이가 큰 것으로 나타났다. 조류의 형태는 주로 하구부의 지형에 의해 결정되므로 준설, 매립, 확폭 등과 같은 하구부에서의 사업이 진행되는 경우, 유사량 변화에 대한 고려가 반드시 이루어져야 할 것으로 판단된다.

• Korean Chemical Engineering Research
• /
• v.44 no.4
• /
• pp.399-403
• /
• 2006

There has been numerous reports for the synthesis of mesoporous $TiO_2$ thin films due to not only the high surface area and regular mesoscale pores but also wide band gap and photo activity. However, the synthesis has been restricted by the limited reproducibility mainly due to the extraordinarily fast hydrolysis and condensation rate of titania precursors. In this report, molar composition of reaction batch (HCl/Ti and Ti/P123) and exterior condition (humidity and temperature) during coating and anealing process. Thereafter, the mesoporous $TiO_2$ thin films were characterized by XRD and TEM

• Journal of Korea Society of Industrial Information Systems
• /
• v.25 no.1
• /
• pp.89-99
• /
• 2020

In this paper, we consider a dyadic server control policy that combines workload control and single vacation. Customer arrives at the system with Bernoulli process, waits until his or her turn, and then receives service on FCFS(First come first served) discipline. If there is no customer to serve in the system, the idle single server spends a vacation of discrete random variable V. If the total service times of the waiting customers at the end of vacation exceeds predetermined workload threshold D, the server starts service immediately, and if the total workload of the system at the end of the vacation is less than or equal to D, the server stands by until the workload exceeds threshold and becomes busy. For the discrete-time Geo/G/1 queueing system operated under this dyadic server control policy, an idle period is analyzed and the steady-state queue length distribution is derived in a form of generating function.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.93-99
• /
• 2012

This paper presents an optimal design of magnetorheological (MR) fluid based mount (MR mount in short) which can be applicable to vibration control of diesel engine of ship. In this work, a mixed - mode including squeeze mode, flow mode and shear mode is proposed and designed. In order to determine actuating damping force of MR mount required for efficient vibration control, excitation force from diesel engine is analyzed. In this analysis, a model of V-type engine is considered and the relationship between velocity and pressure of gas in torque of the piston is derived. Subsequently, by integrating the field-dependent rheological properties of commercially available MR fluid with the excitation force an appropriate size of MR mount is designed. In addition, in order to achieve maximum actuating force with geometric constraints design optimization is undertaken using ANSYS software. Through the magnetic density analysis, optimal design parameters such as bottom gap and radius of coil are determined.

• The Journal of Korea Robotics Society
• /
• v.8 no.1
• /
• pp.29-36
• /
• 2013

This paper presents a sensitivity optimization of a MEMS (microelectromechanical systems) gyroscope for a magnet-gyro system. The magnet-gyro system, which is a guidance system for a AGV (automatic or automated guided vehicle), uses a magnet positioning system and a yaw gyroscope. The magnet positioning system measures magnetism of a cylindrical magnet embedded on the floor, and AGV is guided by the motion direction angle calculated with the measured magnetism. If the magnet positioning system does not measure the magnetism, the AGV is guided by using angular velocity measured with the gyroscope. The gyroscope used for the magnet-gyro system is usually MEMS type. Because the MEMS gyroscope is made from the process technology in semiconductor device fabrication, it has small size, low-power and low price. However, the MEMS gyroscope has drift phenomenon caused by noise and calculation error. Precision ADC (analog to digital converter) and accurate sensitivity are needed to minimize the drift phenomenon. Therefore, this paper proposes the method of the sensitivity optimization of the MEMS gyroscope using DEAS (dynamic encoding algorithm for searches). For experiment, we used the AGV mounted with a laser navigation system which is able to measure accurate position of the AGV and compared result by the sensitivity value calculated by the proposed method with result by the sensitivity in specification of the MEMS gyroscope. In experimental results, we verified that the sensitivity value through the proposed method can calculate more accurate motion direction angle of the AGV.