• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.9
• /
• pp.1073-1078
• /
• 2012

This paper presented the extraction solution for the coupling coefficient at the magnetically coupled wireless power transmission(WPT) system through the analysis of its equivalent circuit considering the loss. The conventional extraction solution using coupled mode theory is generalized employing the extracted solution considering the load resistance. Consequently, the measuring process of extracting coupling coefficient becomes convenient since the even/odd mode analysis is not necessary. Furthermore, the coupling coefficient obtained from the induced extraction method was in excellent agreement with the coupling coefficient obtained using the ratio of magnetic flux passing through the two loops. The extraction of the accurate coupling coefficient at the magnetically coupled WPT is an essential work to analyze and optimize the WPT system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05e
• /
• pp.81-84
• /
• 2003

유도결합형 플라즈마(Inductively coupled plasma)는 조명기술 분야에서도 효과적인 방전 소스로 이용되고 있다. 이중 무전극 램프에서의 유도결합형 플라즈마의 이용은 장수명은 물론 높은 효율과 넓은 동작 온도특성, 전원 인가시와 동시에 방전이 개시되는 등 여러 가지 장점을 가지고 있다. 본 논문에서는 Re-entr-ant Type QL-lamp에 사용되어진 페라이트의 형태에 변화를 주어 이에 따른 전자계 특성을 살펴보았다. 먼저 페라이트 코어의 특성에 따른 임의의 영역에서의 자속 및 자속밀도 그리고 자계강도 등을 고려하였으며, 시뮬레이션을 통한 페라이트 크기의 변화에 따른 전자계 분포 특성을 조사하였다.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1701-1703
• /
• 2003

유도결합형 플라즈마(Inductively coupled plasma)는 조명기술 분야에서도 효과적인 방전 소스로 이용되고 있다. 이중 무전극 램프에서의 유도결합형 플라즈마의 이용은 장수명은 물론 높은 효율과 넓은 동작 온도특성, 전원 인가시와 동시에 방전이 개시되는 등 여러 가지 장점을 가지고 있다. 본 논문에서는 Re-entrant Type QL-lamp에 사용되어진 페라이트의 형태에 변화를 주어 이에 따른 전자계 특성을 살펴보았다. 먼저 페라이트 코어의 특성에 따른 임의의 영역에서의 자속 및 자속밀도 그리고 자계강도 등을 고려하였으며, 시뮬레이션을 통한 페라이트 크기의 변화에 따른 전자계 분포 특성을 조사하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.4
• /
• pp.520-529
• /
• 1999

Exposure limits for human protection are determined by converting basic limits for induced current, SAR(specific absorption rate), or power density, which are based upon biological effects, to measurable electric and magnetic field intensities. As a part of studies for the establishment of a domestic guideline for exposure limits, the validity of the exposure limits of five representative guidelines or standards, which are derived from basic limits, are investigated in this paper, using the published results for coupling mechanisms of electromagnetic field into a human body, and problems in each standard are analyzed and compared with each other.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.2
• /
• pp.267-276
• /
• 1999

A 2 stage 6-pole bandpass filter (BPF) is designed and implemented by using K-band triple-mode cavity. The BPF has an 100MHz bandwidth at the center frequency of 18.5GHz and the response of the filter is Chebyshev function. The cavity filter uses two orthogonal $TE_{113}$ modes and one $TM_{012}$ mode. To obtain a Chebyshev response, the intercavity coupling between the adjacent cavities is accomplished by H-field component of TE modes parallel to slot plate. In this paper, the size and location of intercavity slot are determined by the detailed coupling equation from H-field of TE resonant modes in circular cavity. The measured results agree well with the theoretical one.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.4
• /
• pp.535-541
• /
• 1998

A 2 stage 6-pole bandpass filter(BPF) is designed and implemented by using triple-mode cavity for satellite payload system. The BPF has an 100 MHz bandwidth at the center frequency of 14.5 GHz, Ku-band. The cavity filter uses two orthogonal $TE_{113}$ modes and one $TM_{012}$ mode. The intercavity coupling between the adjacent cavities results in a Chebyshev response and is accomplished by H-field component of TE modes. The size and location of intercavity slot are determined by the coupling equation from H-field of TE resonant modes in circular cavity. The measured filter response agrees well with the theoretical data.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.8
• /
• pp.73-80
• /
• 2020

The 3D printing of electronics has been a major application topics in additive manufacturing technology for a decade. In this paper, wireless power transfer (WPT) technology for 3D electronics is studied to supply electric power to its inner circuit. The principle of WPT is that electric power is induced at the recipient antenna coil under an alternating magnetic field. Importantly, the efficiency of WPT does rely on the design of the antenna coil shape. In 3D printed electronics, a flat antenna that can be placed on the printed plane within a layer of a 3D printed part is used, but provided a different antenna response compared to that of a conventional PCB antenna for NFC. This paper investigates the WPT response characteristics of a WPT antenna for 3D printed electronics associated with changes in its design elements. The effects of changing the antenna curvature and the gap between the wires were analyzed through experimental tests.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.1273-1278
• /
• 2005

In this thesis, a 2 stage 6-pole bandpass filter(BPF) is designed and implemented by using triple-mode cavity for satellite payload system. The BPF has a 100MHz bandwidth at the center frequency of 14.5GHz(Ku-band) and the response of the filter is the Chebyshev function. The cavity filter uses two orthogonal $TE_{113}$ modes and one $TM_{012}$ mode. The coupling between the adjacent cavityes(intercavity coupling) results in a Chebyshev response and is accomplished by only H-filed component of TE modes. The size and location of intercavity slot is determined by the coupling equation from E- and H-field of TE and TM resonant modes in circular cavity. The 2-stage 6-pole triple-mode cavity BPF has the insertion loss of 2.4dB and the reflection loss of 15dB in the passband. The triple-mode BPF proposed in this thesis can be used as channel filters for satellite payload system and can minimize filter assembly in general wireless communication system.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.42 no.4
• /
• pp.69-76
• /
• 2005

In this paper, a 2 stage 6-pole bandpass filter(BPF) is designed and implemented by using triple-mode cavity for satellite payload system. The BPF has a 100MHz bandwidth at the center frequency of 14.5GHz(Ku-band) and the response of the filter is the Chebyshev function. The cavity filter uses two orthogonal $TM_{113}$ modes and one $TM_{012}$ mode. The coupling between the adjacent cavityes(intercavity coupling) results in a Chebyshev response and is accomplished by only H-filed component of If modes. The size and location of intercavity slot is determined by the coupling equation from E-and H-field of TE and TM resonant modes in circular cavity. The 2-stage 6-pole triple-mode cavity BPF has the insertion loss of 2.4dB and the reflection loss of 15dB in the passband. The triple-mode BPF proposed in this thesis can be used as channel filters for satellite payload system and can minimize filter assembly in general wireless communication system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.2355-2362
• /
• 2014

Electric railway induces interference voltage on wayside communication cable which brings about communication errors, malfunction of devices, and safety problem. The magnitude of the induced voltage depends on the electromagnetic field coupling which is affected by metallic installations such as rail and track structures. This paper provides an experimental analysis of the screening effect of metallic pipe on the inductive voltage caused on communication cable. The measurements at a high-speed rail site show that the screening effect of metallic pipe is about 20% when the separation distance between the pipe and communication cable is 1~2 m. The screening effects is less than 1% and can be neglected when the separation distance is more than 4 m. These results are useful to evaluate the screening effects of the metallic installations such as water pipe, gas pipe, and reinforcing bar.