• Title/Summary/Keyword: 유기 결정체

Search Result 118, Processing Time 0.028 seconds

산욕기 질병관리(유열)

  • Kim, Hyeong-Jong
    • Feed Journal
    • /
    • v.4 no.10 s.38
    • /
    • pp.132-137
    • /
    • 2006
  • 목장 경영의 성공과 실패에는 여러 가지 요인이 작용하지만 연중 얼마나 적은 소가 도태되는가 하는 것 또한 아주 중요하게 생각해 보아야 할 사항이다. 낙농에 있어 거의 대부분의 질병이 산욕기에 발병하는데 산욕기(産褥期)란 분만으로 인한 상처가 완전히 낫고, 자궁이 평상시 상태가 되며 신체의 각기관이 임신 전의 상태로 회복되기까지의 기간으로 대개 분만 후 6~8주간을 말한다. 산욕기에 주로 발생할 수 있는 다양한 질병(산욕기 부전마비, 난산, 급성유방염, 제4위 전위증 등)들이 조기에 발견되어 적절히 치료되지 못하고 만성화되면서 전해질불균형, 에너지와 단백질의 섭취부족에 의한 영양장애로 허약과 지방간 및 케토시스 등으로 진행되어 결국 도태됨으로서 목장 경영에 있어 막대한 영향을 끼치는 것이다. 이러한 산욕기 질병의 주 원인은 건유기 사양관리에 있다. 건유기간 동안 체점수(BCS)의 변화를 최대한 줄이면서 분만전의 스트레스를 얼마만큼 줄일 수 있도록 관리하는가에 달려있다. 다시말해 분만 전 마지막 한달간에 건유에서 분만으로의 이행과정을 얼마나 매끄럽게 연결 지어주는가에 따라 산욕기 질병의 발생률이 결정되는 것이다. 본 고에서는 건유기 사양관리 소홀로 발생되는 산욕기 부전마비에 관해서 자세히 설명해 보고자 한다.

  • PDF

A Study on the Preparation of Hollow Microbeads Using Hydroxypropyl Chitosan (키토산 유도체를 이용한 화장품용 중공 마이크로비드의 제조에 관한 연구)

  • 하병조
    • Journal of the Society of Cosmetic Scientists of Korea
    • /
    • v.24 no.1
    • /
    • pp.7-24
    • /
    • 1998
  • 게 껍질로부터 얻은 키틴을 탈아세틸화하여 키토산을 얻었으며, 얻어진 키토산의 유기용매에 대한 용해성을 향상시키기 위해 알칼리 조건에서 고압반응ㅇ기를 사용하여 프로필렌옥사이드와 반응시켜 치환율 3.5의 히드록시프로필 키토산을 합성하였다. 합성된 히드록시프로필 키토산은 고체상 CP/MAS 13C-NMR, 1H-NMR, FT-IR을 통해 반응이 키토산의 6번 탄소의 수산기와 2번 탄소의 아민기에 주로 일어났음을 알 수 있었다. 또한 X-선 회절분석을 통해 키토산의 결정성이 프로필렌옥사이드와의 반응에 의해 크게 감소하였음을 알 수 있었고, 그 결과 유기 용매에 대한 용해성이 현저히 증가되는 현상을 나타내었다. 한편, 히드록시프로필 키토산을 수상에 녹인 후 W/O 에멀젼상에 서 알칼리 촉매를 사용항 에피클로로히드린과 가교반응을 실시한 결과 내부가 비어있는 중공 마이크로비드를 얻을 수 있었다. 전자현미경을 통한 분석결과 중공 마이크로비드의 껍질의 내부에는 스킨층이 형성되어 있었으며, 외부 표면은 다공성이 높은 비대칭 막으로 되어 있음을 확인할 수 있었다.

  • PDF

Bio-mediated Flocculation by Extracellular Polymeric Substances in Cohesive Sediment Suspensions: Experimental Study (생체고분자물질이 부유사 응집에 미치는 영향 연구)

  • Baek, Seung-Ryong;Kim, Jae-In;O, Min-Ji;Lee, Byeong-Jun
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2015.05a
    • /
    • pp.107-107
    • /
    • 2015
  • 최근 기후변화로 인한 강우강도 증대, 산업화에 따른 토지개발 등으로 인하여 다량의 점착성 부유사(Cohesive Sediments)가 하천, 호소 등 수자원 환경으로 유입되고 있다. 점착성 부유사는 하천, 호소의 난류 조건에 따라 부유하거나 혹은 응집, 침전하여 하상 저니층을 형성한다. 부유사, 미생물 및 각종 유기입자가 포함된 하상 저니층은 검은색으로 외관상 보기 좋지 않을 뿐 아니라, 혐기성상태에서 부패하여 수생태계의 건강성을 해치게 된다. 또한 미세 부유사 및 미생물 입자는 각종 중금속, 유기오염물질을 흡착하고, 조건에 따라 재용출할 수 있는 저장매체로 작용하기 때문에 수자원환경에 미치는 영향이 아주 크다. 특히, 수중 미생물(조류) 작용에 의해 생성되는 EPS (Extracellular Polymeric Substances)는 부유사 및 미생물 입자들을 서로 엉겨 붙게 하여, 부유사-미생물 혼합 응집체 및 저니층 형성을 가속화하게 된다. 본 연구에서는 EPS가 부유사 응집에 미치는 영향을 파악하기 위하여, Xanthan Gum (Sigma-Aldrich, USA)을 EPS의 지표 물질로 사용하고, Kaolinite(Sigma-Aldrich, USA)를 수자원환경에 존재하는 대표적인 부유사로 사용하여 응집실험(Jar Test)을 수행하였다. 이온농도가 응집에 미치는 영향을 파악하기 위하여 수체 이온농도를 0.0001M NaCl, 0.001M NaCl, 0.01M NaCl, 그리고 0.001M NaCl + 0.1mg/L $Ca^{2+}$, 0.001M NaCl + 0.5mg/L $Ca^{2+}$, 0.001M NaCl + 1.0 mg/L $Ca^{2+}$으로 보정하여 응집실험을 수행하였다. 250 rpm 급속 교반 1븐, 50 rpm 완속교반 5시간, 침잔 1시간 후 응집체를 채취하여 응집체 이미지 분석을 통해 응집체 크기 및 형상을 측정하였고, 수표면 2 cm 지점에서 상등액을 채수하여 잔류 고형물 농도 분석을 실시하였다. 응집실험을 통하여 다음과 같은 결과를 도출하였다.. 낮은 이온농도의 경우, EPS가 큰 고분자 구조체에 부유 입자들이 엮어 응집되는 Sweeping Flocculation의 특징을 나타내었다. 하지만, 이온농도가 높아질수록 경우, EPS 고분자 구조체 내부 반발력이 감소하여 크기가 축소되고, 이에 따라 부유 입자 표면에 패치 형태로 흡착되었다. EPS가 패치형태로 입자에 흡착한 경우, 응집제 농도 증가에 따라 응집능 최적점이 형성되고, 이후 표면하전 역전이나 Steric Stabilization에 의해 응집능이 저감되는 형태를 나타낸다. 따라서,수중이온농도가 EPS의 사슬형 고분자 응집제의 크기, 형태(Morphology)를 결정하고, 더 나아가 응집능을 결정하는 중요한 인자로 나타났다. 따라서, 후속 연구를 통하여 생체고분자물질의 크기 및 형태 변화, 이에 따른 응집능변화를 면밀히 연구하고자 한다.

  • PDF

Study on Characteristics and Preparation of Binderless ZSM-5 Granules for Adsorption of Xylene Isomers (Binderless ZSM-5 성형체의 합성 및 자일렌 이성체의 흡착 특성에 관한 연구)

  • Yun, Hyo-Sang;Hong, Ji-Sook;Suh, Jeong-Kwon;Shin, Chae-Ho
    • Applied Chemistry for Engineering
    • /
    • v.21 no.4
    • /
    • pp.417-423
    • /
    • 2010
  • In this study, an effective method to prepare granular binderless ZSM-5 which is as efficient p-xylene separatory adsorbent was explored. Colloidal silica sol 30 wt% solution as an inorganic binder and microcrystalline cellulose as an organic additive were added to ZSM-5 powder ($SiO_2/Al_2O_3$ = 50). Adsorbent with enough strength (0.721 kgf), high crystallinity (94.6%) and high BET specific surface area ($379.2m^2$/g) was obtained by calcination, binderless treatment, ${NH_4}^+$ ion exchange, and activation after spherical granulation process. A batch type adsorption experiment was proceeded with solutions comprising 3 xylene isomers by 1 : 1 : 1 weight ratio to evaluate adsorption characteristics of prepared absorbent. As a result, the obtained binderless ZSM-5 granule showed a higher selective adsorption performance for para-xylene than that of commercial adsorbent.

Preparation of Cobalt-Substituted Iron Oxide Powder from Organometallic Precursors (Ⅱ) (유기금속 전구체로부터 코발트 치환 산화철 분말 제조 (Ⅱ))

  • Kim, Jeong Su;Gang, Han Cheol;Hong, Yang Gi
    • Journal of the Korean Chemical Society
    • /
    • v.38 no.2
    • /
    • pp.92-100
    • /
    • 1994
  • Ultrafine cobalt-substituted iron oxide particles were prepared by the thermal decomposition and oxidation of the new organometallic precursor, $Co_xFe_{1-x}(N_2H_3COO)_2(N_2H_4)_2$ (x = 0, 0.01, 0.02, 0.03, 0.05, 0.10, 1.00). The organometallic precursors were synthesized by the reaction of Co(II) and Fe(II) ion in a mole ratio of x : 1-x with hydrazinocarboxylic acid, and characterized by quantitative analysis, elemental analysis and infrared spectroscopy. The mechanistic study on the thermal decomposition of the organometallic precursors was performed by TG-DTG and DSC. The cobalt-substituted iron oxide particles were obtained by the heat treatment of the precursors at $350^{\circ}C$ and $450^{\circ}C$ for six hours in air. The prepared iron oxide was found to have two phases such as ${\gamma}-Fe_2O_3$ and a mixture of ${\gamma}-Fe_2O_3\;and\;{\alpha}-Fe_2O_3$ at $350^{\circ}C$ and $450^{\circ}C$ respectively. The particle shape was equiaxial and the particle size was less than 0.05 ${\mu}m.$ The coercivity and squareness of the cobalt substituted iron oxide particles increased with increasing cobalt content. Both coercivity and squareness showed higher values at $450^{\circ}C.$

  • PDF

Effect of pyrolysis temperature and pressing load on the densification of amorphous silicon carbide block (열분해 온도와 성형압력의 영향에 따른 비정질 탄화규소 블록의 치밀화)

  • Joo, Young Jun;Joo, Sang Hyun;Cho, Kwang Youn
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.30 no.6
    • /
    • pp.271-276
    • /
    • 2020
  • In this study, an amorphous SiC block was manufactured using polycarbosilane (PCS), an organosilicon polymer. The dense SiC blocks were easily fabricated in various shapes via pyrolysis at 1100℃, 1200℃, 1300℃, 1400℃ after manufacturing a PCS molded body using cured PCS powder. Physical and chemical properties were analyzed using a thermogravimetric analyzer (TGA), scanning electron microscope (SEM), energy dispersive spectroscopy (EDS), and universal testing machine (UTM). The prepared SiC block was decomposed into SiO and CO gas as the temperature increased, and β-SiC crystal grains were grown in an amorphous structure. In addition, the density and flexural strength were the highest at 1.9038 g/㎤ and 6.189 MPa of SiC prepared at 1100℃. The manufactured amorphous silicon carbide block is expected to be applicable to other fields, such as the previously reported microwave assisted heating element.

Deterministic intermediate Sampling과 Yen's algorithm을 이용한 Urey-Miller 반응 경로 제시

  • Kim, Jin-U;Kim, Yeon-Jun;Kim, U-Yeon
    • Proceeding of EDISON Challenge
    • /
    • 2015.03a
    • /
    • pp.6-13
    • /
    • 2015
  • 이 연구는 초기 지구의 대기 환경에서 유기화합물(glycine)이 합성되는 실험(Urey-Miller 실험)에서의 반응 경로를 Deterministic한 방법의 중간체 sampling 방법으로 반응 네트워크를 구성하고 Yen's알고리즘으로 네트워크 내의 최단경로를 제시함으로써 반응물과 생성물이 결정되어 있을 때 최소한의 화학적 직관만을 이용하여 제시하는 것이 목표이다. 이 연구 결과는 2014년도 Nature Chemistry에 발표된 다른 방법론을 적용하여 제시된 Urey-Miller reaction path와 비교해 어떠한 반응이 상대적으로 더 타당한 경로를 제시했을지 알아보았다. 이 연구에서 나온 reaction path에서의 중간체들에 대해 GAMESS를 이용한 B3LYP/6-31g(d,p) DFT계산을 수행하였다. 결과를 분석해보면서 어떤 부분이 부족하며 이 연구에 적용한 방법론을 어떻게 발전시켜나가야 더 나은 결과를 얻을 수 있을지를 함께 고려해 보았다.

  • PDF

Separation of Isomers and Close Boiling Mixtures by Crystalline Thiourea (결정성 Thiourea에 의한 유기 이성체 및 유사비점 혼합물의 분리)

  • Kim, Kwang-Joo;Lee, Choul-Ho;Lee, Jung-Min
    • Applied Chemistry for Engineering
    • /
    • v.7 no.1
    • /
    • pp.129-135
    • /
    • 1996
  • The entrapping capacity of the single hydrocarbons and the entrapping equilibrium data for binary mixtures of the $C_6$ to $C_9$ hydrocarbons on the activated thiourea have been investigated. The entrapping capacity of single component varied irregularly with molecular size and was independent of temperature. In the liquid phase entrapping from binary system, the lower molecular weight hydrocarbon was entrappe preferentially. In the liquid phase entrapping from trimethylbenzene isomer and ethyltoluene isomer, selectivity was found to be related to the relative position of methyl groups in the molecules and hence the electronic configuration. Pseudocumene of a purity of 99.5wt% may be obtained from $C_9$ aromatic raffinate found in naphtha cracking center. Activated thiourea was more efficient than distillation, extractive crystallization and adductive crystallization in terms of separation factor.

  • PDF

Tracking and Orbit Determination of International Space Station using Radar (레이더를 이용한 국제우주정거장 추적 및 궤도결정)

  • Yu, Ki-Young;Chung, Dae-Won
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.44 no.5
    • /
    • pp.447-454
    • /
    • 2016
  • Increase of space debris makes low earth orbit(LEO) environment more complex day by day and space situation Awareness(SSA) is becoming more important. As an essential part of SSA, space object surveillance and tracking is studied by many countries including America and Europe. And radar system forms the backbone of an space surveillance and tracking. Currently, Korea operates many LEO satellites like KOMPSAT but does not have dedicated radar systems which provide collision surveillance between satellite and space debris. Korea Aerospace Research Institute(KARI) NARO space center operates launch-vehicle tracking radar system in GOHEUNG and JEJU, respectively. In this paper, we describe developing operation concept to track International Space Station(ISS) using NARO radar and results of tracking. Then, we describe ISS orbit determination using radar tracking data. Lastly, orbit determination result is compares with TLE for analyzing effectiveness of orbit determination.

Fine Size YAG:Tb Phosphor Particles Prepared by Spray Pyrolysis (분무 열분해 공정에 의해 합성된 미세 YAG:Tb 형광체)

  • Lee, Hyo Jin;Hong, Seung Kwon;Jung, Dae Soo;Kang, Yun Chan;Jung, Kyeong Youl
    • Korean Chemical Engineering Research
    • /
    • v.43 no.3
    • /
    • pp.407-411
    • /
    • 2005
  • YAG:Tb($Y_3Al_5O_{12}:Tb$) phosphor particles were prepared by spray pyrolysis from spray solution containing various types of flux materials. The effects of type of flux, organic material and post-treatment temperature on the characteristics of morphology, crystallinity and photoluminescence of YAG:Tb phosphor particles were investigated. Citric acid and ethylene glycol used as organic additive improved the photoluminescence intensity of the YAG:Tb phosphor particles without destruction of the morphology after post-treatment at high temperature. However, the spherical shape of the precursor particles obtained by spray pyrolysis from spray solution containing high amount of flux material disappeared after post-treatment at $1300^{\circ}C$. YAG:Tb phosphor particles prepared from spray solution containing lithium carbonate flux had fine size and regular morphology after post-treatment. Lithium carbonate used as flux material was also efficient in improvement of the photoluminescence intensity of the YAG:Tb phosphor particles. The optimum photoluminescence intensity of the YAG:Tb phosphor particles prepared from spray solution containing lithium carbonate flux was 189% of that of the phosphor particles prepared from spray solution without flux material.