• Membrane Journal
• /
• v.31 no.5
• /
• pp.363-370
• /
• 2021

Organic solvent resistant hollow fiber membranes were fabricated via a thermally induced phase separation (TIPS) method using Polyketone polymer, a material with excellent resistance to organic solvents. The PEG300, DMSO₂ and Glycerine called the "green solvents" were used as diluents for TIPS method. The spherulite structure was formed with DMSO₂ by S-L phase separation behavior whereas the bicontinuous structures were formed with PEG300 and Glycerine, respectively. The morphology of the PK hollow fiber membranes was investigated using SEM. The pure water permeability and the durability test were conducted to understand the permeation properties of PK hollow fiber membranes. The tensile strength test was conducted for the property of mechanical strength. In this study, the fabrication of PK hollow fiber membranes with various diluents was discussed to understand the correlation between diluent and polymer in detail.

• Journal of Adhesion and Interface
• /
• v.24 no.1
• /
• pp.17-25
• /
• 2023

In this study, waste polyethylene terephthalate (PET) was recycled to produce a support and then polyetherimide (PEI) was used for environmentally friendly organic solvent nanofiltration. The prepared composite membrane was first prepared by electrospinning a PET support, then casted on the support using PEI having excellent solvent resistance, and organic solvent nanoparticles using a Non-solvent Induced Phase Separation (NIPS) method. A filtration membrane was prepared. First, the fiber diameter and tensile strength of the PET scaffold prepared prior to membrane fabrication were identified through morphology analysis, and the optimal scaffold for the organic solvent nanofiltration membrane was identified. Afterward, the PET/PEI composite membrane prepared was checked for the DEA removal rate of Congo red having a molecular weight of 697 g/mol in ethanol to understand the performance as an organic solvent nanofiltration membrane according to the concentration of PEI. Finally, the removal rate of Congo red was 90% or more.

• Journal of Soil and Groundwater Environment
• /
• v.9 no.3
• /
• pp.20-26
• /
• 2004

In-situ photolysis is one of the most promising ways to clean up a soil contaminated with 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD). This study focuses on the mathematical description and model development of the convective upward transport of an organic solvent driven by evaporation and photodecomposition at the surface as the major transport mechanism in the clean up process. A finite-element-based numerical model was proposed to incorporate effects of multiphase flow on the distribution of each fluid, gravity as a driving force, and the use of van Genutchen equation for more accurate description of k-S-p relations. This paper presents results of extensive numerical calculations conducted to investigate the various parameters that play a role in the solvent migration through a laboratory-scale unsaturated soil column. The numerical results indicate that gravity affects significantly on the fluids distribution and evaporation for highly permeable soils. The soil texture has a profound influence on the fluid saturation profile during evaporation process. The amount of solvent convective motion increases with increasing evaporation rates and decreasing initial water saturation. Simulations conducted in this study have shown that the developed model is very useful in analyzing the effects of various parameters on the convective migration of an organic solvent in the soil environments.

• Journal of Life Science
• /
• v.30 no.1
• /
• pp.88-95
• /
• 2020

Using a random arbitrarily primed polymerase chain reaction, messenger RNA expression levels were assessed after exposure to 10% (v/v) toluene for 8 hr in solvent-tolerant Pseudomonas sp. BCNU 106. Among the 100 up-expressed products, 50 complementary DNA fragments were confirmed to express repeatedly; these were cloned and then sequenced. Blast analysis revealed that toluene stimulated an adaptive increase in the gene expression level in association with transcriptions such as LysR family of transcriptional regulators and RNA polymerase factor sigma-32. The expression of catalase and Mn2+/Fe2+ transporter genes functionally associated with inorganic ion transport and metabolism increased, and the increased expression of type IV pilus assembly PilZ and multi-sensor signal transduction histidine kinase genes, functionally categorized into signal transduction and mechanisms, was also demonstrated under toluene stress. The gene expression level of beta-hexosaminidase in association with carbohydrate transport and metabolism increased, and those of DNA polymerase III subunit epsilon, DNA-3-methyladenine glycosylase II, DEAD/DEAH box helicase domain-containing protein, and ABC transporter also increased after exposure to toluene in DNA replication, recombination, and repair, and even in defense mechanism. In particular, the RNAs corresponding to the ABC transporter, Mn2+/Fe2+ transporter, and the β-hexosaminidase gene were confirmed to be markedly induced in the presence of 10% toluene. Thus, defense mechanism, cellular ion homeostasis, and biofilm formation were shown as essential for toluene tolerance in Pseudomonas sp. BCNU 106.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.2
• /
• pp.79-89
• /
• 1988

This experiment was carried out to investigate the difference of compositions between petroleum ether extract and its tall oil in Pinus rigida Mill. xylem and to obtain the basic data on effective extraction and its utilization of by-product, resin and fatty acid, when pulp making. After both petroleum ether extract from wood meal and its tall oil in pitch pine were separated to the resin and fatty acid by using DEAE-Sephadex and aluminum oxide column, these were analyzed with gas chromatograph. The results obtained were as follows: 1. Fatty acids contained as ester form in living trees were varied by peroxide of organic solvent in petroleum ehter extraction and cooking chemicals in cooking. 2. Pimaric-type acid was eluted earlier than abietic-type acid in resin acids and the fewer the carbons, the earlier the elution in fatty acids. 3. The retention time of SE-30 column was even smaller than that of OV-101 column but the relative retention time obtained by using methyl pimarate and methyl stearate as internal standard was nearly identical. 4. Both petroleum ether extract and tall oil mainly consisted of resin acids, expecially abietic-type acid. 5. Tall oil had more fatty acid but less resin acid than petroleum ether extract. Also, the content of unidentified materials was increased owing to the isomerization and the shift of double bond position in unsaturated fatty acids by high temperature and cooking chemicals when cooking.

• Korean Chemical Engineering Research
• /
• v.53 no.1
• /
• pp.78-82
• /
• 2015

Hollow silica particles were prepared using sodium silicate and organic templates. Polystyrene latex (PSL) particles produced by dispersion polymerization were used as organic templates. PSL particles ranged from $1{\mu}m$ to $3{\mu}m$ in diameter were synthesized by adjusting the amount of 2,2'-azobisisobutyronitrile (AIBN). The PSL/$SiO_2$ core-shell particles were prepared by coating of silica nanoparticles originated from sodium silicate using sol-gel method. The organic templates were removed by the organic solvent, tetrahydrofuran (THF). Morphology of hollow silica particles was investigated with respect to types of the reaction medium and pH during the process. By changing the solvent from ethanol to water, hollow silica particles were successfully formed. Hollow silica particles with the uniform shell thickness were produced at low pH as well. The reflectivity of the as-prepared silica particles was measured in the range of the wavelength of UV and visible light. Hollow silica particles showed much better reflective properties than the commercial light reflector, Insuladd.

• Journal of Adhesion and Interface
• /
• v.25 no.1
• /
• pp.157-161
• /
• 2024

Amphiphilic gold nanoparticles, synthesized by the simultaneous binding of hydrophilic and hydrophobic ligands on their surfaces, find diverse applications in energy, bio, optical, electronic technologies, and various other fields. Particularly, these amphiphilic gold nanoparticles possess both hydrophilic and hydrophobic characteristics, enabling them to activate interface at the interface of immiscible fluids and form organized structures. The surface properties of gold nanoparticles play a crucial role in influencing the behaviors of amphiphilic gold nanoparticles at the interface of two fluids. Therefore, this study investigated the adsorption behaviors of gold nanoparticles at the organic solvent-water interface based on the surface characteristics of amphiphilic gold nanoparticles and the type of organic solvents. It was observed that the amount of adsorbed gold nanoparticles at the interface increased with the length of hydrocarbon chains in hydrophobic ligands and increased with shorter hydrocarbon chains in the organic solvent. Furthermore, using the Langmuir isotherm model, the study confirmed the formation of a monolayer by amphiphilic gold nanoparticles and obtained significant thermodynamic parameters simultaneously.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.230-230
• /
• 2003

Chalcopyrite 구조를 가진 CuInSe$_2$ (CIS) 나노입자를 유기용매인 diethylamine을 사용하여 autoclave안에서 용매열법(solvothermal method)으로 제조하였다. 180 $^{\circ}C$에서 36시간 반응시켜 길이가 10-30 nm, 폭이 5-10 nm인 rod-Eke 형상을 한 CIS 나노입자를 얻었다. 반응온도를 25$0^{\circ}C$로 증가시키고 동일한 반응시간에서 보다 미세하고 균일한 구형의 CIS 나노입자를 관찰할 수 있었다. 한편, 190 $^{\circ}C$에서 얻어진 CIS 나노입자는 36시간을 반응시킨 경우 구형으로 관찰되었으나 60시간 반응시킨 경우는 길이가 50-100 nm 인 rod-like 입자로 성장하였다. 이와 같이 반응시간과 온도를 달리하여 나노입자의 형상이 바뀌는 것을 입자성장기구의 관점에서 고찰하였다. 반응시간과 온도에 따라 얻어진 CIS 나노 입자들의 결정성, 미세구조 그리고 정량 및 정성분석을 XRD, SEM, TEM, EDS등으로 각각 행하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.2
• /
• pp.174-185
• /
• 2004

Organic pollutants (Phenol, 2-Chlorophenol, Nitrobenzene) were separated from wastewater by nondispersive membrane solvent extraction, using a microporous hydrophobic hollow fiber module. The system was operated countercurrently and cocurrently with the aqueous phase flowing through the fiber lumens and the solvent flowing through the shell side. The distribution coefficients of several solvents (MIBK, IPAc, Hexane) were examined and MIBK was selected as an extracting solvent. Separation efficiency of countercurrent flow method was better than that of cocurrent flow method. Also, the overall mass transfer coefficients were determined.

• YAKHAK HOEJI
• /
• v.20 no.1
• /
• pp.32-36
• /
• 1976

The pH titration curves of ampicillin, amoxicillin and cephalexin in aqueous acetone, ethanol and N, N'-dimethylformamide by use of 0.02N-KOH solution showed that 80% acetone was the most effective solvent for alkali titration of them. The pH jumps of samples in 80% acetone were sharp enough to determine the contents of them by use in 80% acetone (9, 4) was coincided with each equivalent point of ampicillin, amoxicillin and cephalexin, but those of phenolphthalein, thymolphthalein, thymol blue and bgrom cresol purple were not. The color change of brom thymol blue at equivalent points was very clear except the case of amoxicillin that the determination of smaples in 80% acetone with 0.02 N-KOH solution by the aid of brom thymol blue could be available.