• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10A
• /
• pp.784-795
• /
• 2009

An accurate positioning estimation in the wireless sensor networks (WSN) is very important in which each sensor node is aware of neighbor conditions. The multi-hop positioning estimation technique is considered as one of the suitable techniques for the WSN with many low power devices. However geographical holes, where there is no sensor node, may severely decrease the positioning accuracy so that the positioning error can be beyond the tolerable range. Therefore in this paper, we analyze error factors of DV-hop and hole effect to obtain node's accurate position. The proposed methods include boundary node detection, distance level adjustment, and unreliable anchor elimination. The simulation results show that the proposed method can achieve higher positioning accuracy using the hole detection and enhanced distance calculation methods compared with the conventional DV-hop.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.4
• /
• pp.571-576
• /
• 2022

Due to the epochal development of the unmanned technology, the importance of LDT(: Location Detection Technology), which accurately estimates the location of a user or object, is dramatically increased. TOA(: Time of Arrival), which calculates a location by measuring the arrival time of signals, and TDOA(: Time Difference of Arrival) which calculates it by measuring the difference between two arrival times, are representative LDT methods. Based on the signals received from three or more base stations, TOA calculates an intersection point by drawing circles and TDOA calculates it by drawing hyperbolas. In order to improve the radio shadow area problem, a huge number of repeaters have been installed in the urban area, but the signals received through these repeaters may cause the serious error for estimating a location. In this paper, we propose an efficient location estimation technique using the signal received through the repeater. The proposed approach estimates the location of MS(: Mobile Station) employing TOA and TDOA methods, based on signals received from one repeater and two BS(: Base Station)s.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.10
• /
• pp.2523-2529
• /
• 2014

Location estimation service can be provided outdoors using various location estimation system based on GPS. However, location estimation system is based on existing indoor resources as GPS cannot be used because of insufficient visible satellites and weak signals. The fingerprinting technique that uses WLAN signal, in particular, is good to use indoors because it uses RSSI provided by AP to estimate location. However, its accuracy may vary depending on how accurate data the offline stage used where the fingerprinting map is built. The study sampled various data at the stage that builds the fingerprinting map and suggested a location estimation system that enhances its precision by saving the data of high frequency among them to improve this problem. The suggested location estimation system based on majority sampling data estimates location by filtering RSSI data of the highest frequency at the client and server to be saved at a map, building the map and measuring a similar distance. As a result of the test, the location estimation precision stood at minimum 87.5 % and maximum 90.4% with the margin of error at minimum 0.25 to 2.72m.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.8-11
• /
• 2021

This paper proposes a method of estimating the optimal position of a robot in order to provide a service by approaching a user located outside the sensing area of the robot in an indoor environment. First, in order to estimate the user's location, the location in the indoor environment was estimated by applying a trilateral approach to the beacon-tag module data, and Voronoi thinning to set the optimal movement goal from the user's estimated location. Based on the generated nodes, the final location was estimated through the calculation of the user location, obstacle, and movement path, and the location accuracy of the service robot was verified through the movement of the destination of the actual robot platform.

• 전기의세계
• /
• v.53 no.5
• /
• pp.34-40
• /
• 2004

이동통신네트워크에서 위치기반서비스(LBS ： Location Based Service)의 중요성이 증대되고 있다. 이러한 LBS는 모바일 사용자의 위치를 추정하고 추정한 위치와 관련된 다양한 정보 서비스를 제공하기 위한 기술로서 휴대 단말의 위치를 파악하는 위치측위기술, LBS 서버기술 그리고 다양한 LBS 응용기술 등으로 구분될 수 있다. 위치측위기술은 위치정보의 정확도에 따라서 제공되는 서비스의 종류와 질이 달라지므로 보다 정밀한 위치정보의 추적이 가능한 고정밀 측위 기술은 개인화 서비스를 위한 필수조건이다.(중략)

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.4
• /
• pp.438-444
• /
• 2004

The intelligent robots that will be needed in the near future are human-friendly robots that are able to coexist with humans and support humans effectively. To realize this, robots need to recognize their position and posture in known environment as well as unknown environment. Moreover, it is necessary for their localization to occur naturally. It is desirable for a robot to estimate of his position by solving uncertainty for mobile robot navigation, as one of the best important problems. In this paper, we describe a method for the localization of a mobile robot using image information of a moving object. This method combines the observed position from dead-reckoning sensors and the estimated position from the images captured by a fixed camera to localize a mobile robot. Using the a priori known path of a moving object in the world coordinates and a perspective camera model, we derive the geometric constraint equations which represent the relation between image frame coordinates for a moving object and the estimated robot's position. Since the equations are based or the estimated position, the measurement error may exist all the time. The proposed method utilizes the error between the observed and estimated image coordinates to localize the mobile robot. The Kalman filter scheme is applied for this method. its performance is verified by the computer simulation and the experiment.

• Journal of Internet Computing and Services
• /
• v.11 no.2
• /
• pp.61-72
• /
• 2010

This paper addresses the problem of moving object localization using Ultra-Wide-Band(UWB) range measurement and the method of location accuracy improvement of the indoor moving object. Unlike outdoor environment, it is difficult to track moving object position due to various noises in indoor. UWB is a radio technology that has attention for localization applications recently. UWB's ranging technique offer the cm accuracy. Its capabilities for data transmission, range accurate estimation and material penetration are suitable technology for indoor positioning application. This paper propose a positioning algorithm of an moving object using UWB ranging technique and particle filter. Existing positioning algorithms eliminate estimation errors and bias after location estimation of mobile object. But in this paper, the proposed algorithm is that eliminate predictable UWB range distance error first and then estimate the moving object's position. This paper shows that the proposed positioning algorithm is more accurate than existing location algorithms through experiments. In this study, the position of moving object is estimated after the triangulation and eliminating the bias and the ranging error from estimation range between three fixed known anchors and a mobile object using UWB. Finally, a particle filter is used to improve on accuracy of mobile object positioning. The results of experiment show that the proposed localization scheme is more precise under the indoor.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2007.11a
• /
• pp.415-418
• /
• 2007

가까운 미래에 인간생활에 활용될 지능형 로봇은 인간과 공존하면서도 효과적으로 인간을 도와줄 수 있는 인간친화형 로봇이라 할 수 있다. 이러한 것을 실현하기 위해서 로봇은 미지의 환경 내에서 자신의 위치 및 방향을 인식해야 할 필요가 있다. 더욱이, 이것은 일상생활에서 자연스럽게 이뤄지는 것이 당연하다. 로봇을 제어하는 가장 중요한 문제중의 하나로서 이동로봇의 주행에서의 위치불확실성을 해결함으로서 로봇의 위치를 추정하는 것이 바람직하다 할 수 있다. 본 논문에서는 실내외 공간에서 인간을 포한함 이동물체의 영상정보를 이용하여 이동로봇의 자기위치를 인식하기 위한 방법을 제시하고 있다. 제시한 방법은 로봇자체의 DR센서 정보와 카메라에서 얻은 영상정보로부터 로봇의 위치추정방법을 결합 한 것이다. 그리고 이동물체의 이전 위치정보와 관측 카메라의 모델을 사용하여 이동물체에 대한 영상프레임 좌표와 추정된 로봇위치 간의 관계를 표현할 수 있는 식을 제시하고 있다. 또한 이동하는 인간과 로봇의 위치와 방향을 추정하기 위한 제어방법을 제시하고 이동로봇의 위치를 추정하기위해서 칼만필터 방법을 적용하였다. 그리고 시뮬레이션 및 실험을 통하여 제시한 방법을 검증하였다.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.850-851
• /
• 2011

본 논문은 SRM의 센서리스 속도제어를 위한 슬라이딩 모드 자속관측기법을 적용하고, 초기기동에서 센서리스 영역까지의 천이구간에서는 동일한 센서리스 추정방식과 계산된 자속의 오차 성분으로 오픈루프 상태에서 속도리플을 억제할 수 있는 방식과 전동기의 온도 및 파라미터 변화에 의한 자속 오차 성분으로 인해 발생하는 위치 추정오차를 보상하기 위한 새로운 추정위치 보상기를 제안한다. 제안된 추정위치 보상기는 SRM의 자기적인 특성에 의해 발생하는 인덕턴스 변곡점 위치를 실제 위치로 가정하여 추정된 센서리스 위치를 순시적으로 보상하는 방식이다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2019.10a
• /
• pp.660-663
• /
• 2019

본 논문은 진공을 이용한 흡착방식과 바퀴형 이동방식을 사용하는 벽면이동로봇의 균열 위치 추정에 관한 연구로써, 로봇의 Yaw값에 대해 PID제어를 통해 로봇의 방향을 제어 하고 이를 바탕으로 엔코더 모터의 홀센서와 IMU를 기반으로 하여 균열 위치를 추정 한다. 위치 추정 성능을 검증하기 위해 실제 위치와 추정된 위치를 비교하고 결과를 제시하였다.