• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.08a
• /
• pp.105-108
• /
• 2000

Many control techniques have been proposed in order to improve the control performance of discrete-time domain control system. In the position control system using a DC servo motor as a driver, the response-characteristic of system is controlled by the PID controller. In the PID control system, the transient response characteristic is more increased and settling time gets longer if gains of PID controller are unsuitable. In this paper, therefore, a expended PID control system is constructed by inserting a pre-compensator at output terminal of PID controller. It is implemented by using the double layers neural network. Form the results of computer simulation in the proposed control algorithm, its usefulness is verified.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.5
• /
• pp.881-888
• /
• 2022

Servo presses are used in variety of ways in industry throughout the production and assembly lines of machine parts. The bottom of the servo press is fixed to a bed or a tabletop, and the press cylinder continuously operates under vertical upward loads. In this research, a static structural analysis was performed by simplifying 3D model of the servo press, and the maximum deformation was applied to the clamp and bolt. The maximum value of Von Mises stress was reported in this paper. The result was used to calculate the safety factor, and it was confirmed that the design was conservative.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.9
• /
• pp.15-21
• /
• 1997

In this paper, a self-activated cable spooling system for seaborne winch is developed . The system consists of a hydraulic servo driving unit and a cable position measurement mechanism. To realize the cable spooling system, it is carried out the mathematical modelling of the system and designed the proportional controller through the system aalysis and the simulation. The cable spooling system is tested and evaluated to validate the performance of the controller. The test results shows a good traceability of the cable spooling system under disturbance of cable tension.

• Investigative Magnetic Resonance Imaging
• /
• v.15 no.1
• /
• pp.11-21
• /
• 2011

Purpose : Localization using MRI is difficult due to susceptibility induced artifacts caused by metal electrodes. Here we took an advantage of the B0 pattern induced by the metal electrodes by using an oblique-view imaging method. Materials and Methods : Metal electrode models with various diameters and susceptibilities were simulated to understand the aspect of field distortion. We set localization criteria for a turbo spin-echo (TSE) sequence usingconventional ($90^{\circ}$ view) and $45^{\circ}$ oblique-view imaging method through simulation of images with various resolutions and validated the criteria usingphantom images acquired by a 3.0T clinical MRI system. For a gradient-refocused echo (GRE) sequence, which is relatively more sensitive to field inhomogeneity, we used phase images to find the center of electrode. Results : There was least field inhomogeneity along the $45^{\circ}$ line that penetrated the center of the electrode. Therefore, our criteria for the TSE sequence with $45^{\circ}$ oblique-view was coincided regardless of susceptibility. And with $45^{\circ}$ oblique-view angle images, pixel shifts were bidirectional so we can detect the location of electrodes even in low resolution. For the GRE sequence, the $45^{\circ}$ oblique-view anglemethod madethe lines where field polarity changes become coincident to the Cartesian grid so the localization of the center coordinates was more facilitated. Conclusion : We suggested the method for accurate localization of electrode using $45^{\circ}$ oblique-view angle imaging. It is expected to be a novelmethodto monitoring an electrophysiological brain study and brain neurosurgery.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.8A
• /
• pp.1096-1103
• /
• 2000

The default server strategy is commonly used for location and state managements of mobile host in mobile computing. With this strategy, we can find the cell of destination mobile host to send data by querying the default server. In SDN(single Default Notification) strategy which is a kind of default server strategy, the call is established after the location and state of the callee is acquired to the query server by querying the default server. But the communication cost overhead from the default server is increased if there are large number of cells and query requests, and if it is too far from the default server to a base station. Still more it will be unable to establish any calls to a mobile host when there is a fault in the default server of this host. In this paper, we suggest add evaluate a default server replication strategy to reduce the communication cost overhead and to make the service available.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.6
• /
• pp.197-202
• /
• 2016

In this paper, we propose optimal smart home security monitoring system. Proposeed optimal smart home security system using the three types of ultrasonic sensors were tested to obtain reliable data. and Using Raspberry Pi3, the smart home security system was implemented. In addition, It was verified through experiments optimal efficiency with a small amount compared to the conventional sensor of the home security system by the two ultrasonic sensors located in the optimal position. It was able to use two ultrasonic sensors to determine whether the intruder's highly efficient and reliable intrusion, and connect the servo motor at the bottom of the camera so you can shoot adjusted to the attacker's location to shoot the intruder's image. In addition, by using a Web server and stored the recorded image and two ultrasonic sensor data and provide a Web page for a user to monitor at all remote locations.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.378-385
• /
• 2000

In this paper, we consider to apply of 2-DOF (Degree of Freedom) PID controller at D.C servo motor system. Many control system use I-PD , PID control system. but the position control system have difficulty in controling variable load and changing parameter. We propose neural network 2-DOF PID control system having feature for removal disturbrances and tracking function in the target value point. The back propagation algorithm of neural network used for tuning the 2-DOF parameter(${\alpha}$,${\beta}$,${\gamma}$,η). We investigate the 2-DOF PID control system in the position control system and verify the effectiveness of proposal method through the result of computer simulation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.522-525
• /
• 2015

In this paper, we propose a walking aid system that guides route to visually impaired people in order to recognize uncertain obstacles based on tactile stimulation. The proposed system is composed of the touch-based obstacle detection module, the obstacle height detection module, and the route guidance algorithms. The touch-based obstacle detection module detects each obstacle, which is located at left, right, and front of a visually impaired person by stimulating his thumb with the rotational force of the servomotor. The obstacle height detection module integrates detected data by the linear arrangement of ultrasonic sensors to identify the height of an obstacle about 3 of-phase(i.e., high, medium, low). The proposed route guidance algorithm guides an optimized path to the visually impaired person by updating his current position information based on the signal of the built-in GPS receiver in smartphone. In addition, the route guidance algorithm delivers information with speech to a visually impaired person through Bluetooth commuination in the developed route guidance app. The proposed system can create a path to avoid the obstacles by recognizing the placed situation of the obstacles with exploring the uncertain path.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.951-954
• /
• 2005

This paper presents a study on the accuracy position Controller design for the Composite Smoke Bomb Rotational driving system using a BLDC servo motor. Function of Smoke Bomb is blind in the enermy's sight so that need to high response. The BLDC servo motor controller was designed with DSP(TMS320VC33), IGBT(Insulated Gate Bipolar. Transistor), IGBT gate driver and CPLD(EPM7128). This paper implements those control with vector control and MIN-MAX PWM. Vector control requires information about rotor positions, a resolver should be used to achieve that. The main controller is implemented with a TMS320VC33 high performance floating-point DSP(Digital Signal Process) and PWM Generator is embodied using EPM7128.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.494-500
• /
• 2002

본 연구의 목적은 DGPS와 자이로 센서를 장착하여 무인으로 콤바인을 직선주행, 선회 및 곡선주행, 직진주행 중 1 m 오프셋(offset) 주행시켰을 때, 무인 자율주행의 성능을 분석하고 개선하는데 있다. 콤바인의 무인자율주행 시스템은 콤바인의 현재위치를 인식하고, 주행하고 있는 콤바인의 주행방향을 감지하여 미리 설정된 경로를 따라 자율적으로 주행하며, 주행 중에 장애물이 검출되면 정지할 수 있도록 개발하였다. 콤바인의 무인 자율주행시스템은 DGPS의 입력 신호로부터 콤바인의 현재위치를 결정하고, 자이로 센서의 입력신호로부터 주행방향을 알 수 있다. 또한 장애물의 감지를 위한 초음파 센서, 콤바인의 주행방향을 조정하는 유압 작동부, 좌.우의 조향레버를 조정하는 서보모터 시스템, 마이크로 컴퓨터로 구성된 제어기와 입출력 인터페이스로 구성되어 있다. 콤바인 자율주행시스템의 프로그램은 DGPS 신호, 자이로 센서 등을 수신하는 수신 프로그램, DGPS 신호등으로부터 관련 변수들을 분석하여 콤바인의 조향수준을 결정하고, 유압실린더 등을 제어하는 제어 프로그램과 콤바인의 이동경로를 저장하는 저장 프로그램으로 구성되어 있다. 콤바인의 무인주행 실험결과 RMS 오차는 50 m 직선주행에서 7.52 cm, 20 m 직선주행 후 1 m 오프셋 된 30 m의 직선주행에서 21.85 cm, 20 m 직선주행 후 90$^{\circ}$선회하여 25 m 직선주행에서 7.55 cm, 반지름 23 m의 원주 사분면 곡선주행에서는 25.98 cm로 각각 나타났다. 소 구획의 포장에서 벼는 가로 방향으로 25~30 cm, 세로 방향으로 15~20 cm의 간격으로 심어져 있다. DGPS 신호에 의한 위치 결정을 할 때 자체 오차 10 cm를 고려하여도 콤바인이 직선구간 및 선회구간을 주행하며 수확작업이 가능함을 알 수 있었다. 그러나 곡선구간에서는 최대오차가 65.5 cm로 매우 크게 나타나, 콤바인을 무인 자율주행으로 수확하기에는 어려움이 있는 것으로 나타났다. 실제 포장은 이론적인 완전한 직선보다는 작은 굴곡이 있는 곡선의 형태가 이루어져 있으므로 주행 오차를 감소하기 위해서는 기계시각을 이용하면 보다 정밀한 조향을 이룰 수 있을 것으로 예상된다. 포장에서 DGPS 신호, 자이로 센서 등을 이용한 콤바인의 무인주행 장치는 무인 수확작업을 위한 가능성을 보여주었고, 일부의 센서의 기능을 개선하면 만족한 성능을 나타낼 수 있을 것으로 판단된다.