• Title/Summary/Keyword: 위치결정 특성

Search Result 1,084, Processing Time 0.03 seconds

A Study on Synthesis of Carbon Nanomaterial as a Material for Eco-ship (친환경 선박용 재료인 탄소나노물질의 합성에 관한 연구)

  • Choi, Jae-Hyuk;Kim, Jae-Hyun;Shin, Woo-Jung;Choi, Jung-Sik;Ryu, Kyoung-Boo;Lee, Sang-Min;Park, Seol-Hyun;Lee, Joo-Hee;Lim, Tae-Woo
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.18 no.5
    • /
    • pp.468-474
    • /
    • 2012
  • In this study, experimental studies were performed for the carbon nanomaterial(CNM) which is catching on as a material for eco-ship. The opposed-flow methane flame was used as a heat source for synthesis of CNM. Ferrocene was used as a catalyst for the synthesis of CNM. These major parameters were $H_2$ mixing rate and sampling positions that synthesize CNMs in opposed-flow diffusion flames. The propensities of CNMs were experimentally determined using SEM and TEM images. The experimental result showed that the amount of CNTs was increased with increasing $H_2$ concentration. It can also be found that the optimal temperature in opposed-flow methane flame for synthesis of CNT was about 1500 K.

An Influence of Point-Source and Flow Events on Inorganic Nitrogen Fractions in a Large Artificial Reservoir (대형 인공호에서 무기 질소원에 대한 점오염원 및 유입수의 영향)

  • An, Kwang-Guk
    • Korean Journal of Ecology and Environment
    • /
    • v.33 no.4 s.92
    • /
    • pp.350-357
    • /
    • 2000
  • This paper evaluated the influence of point source and flow events on inorganic nitrogen fractions at 17 sites of Taechung Reservoir during 1993${\sim}$1994. Total nitrogen (TN) averaged 1.53 mg/L during the study and ranged between 0.70 and 2.56 mg/L. Dissolved inorganic nitrogen(DIN) accounted for >90% of TN regardless of season and location, indicating a nitrogen-rich system showing eutrophic${\sim}$hypereutrophic conditions. Some 67${\sim}$94% of DIN was NO$_{3}$-N, whereas mean level of NH$_{4}$-N was less than 5% of DIN. During monsoon 1993, dilution of NO$_{3}$-N was evident in the headwaters as a result of mixing of lake water with rain water, while NH$_{4}$-N increased>100% compared to the premonsoon. Values of NH$_{4}$-N had a positive correlation with rainfall (r=0.85; p<0.001) and negative correlations with theoretical water residence time(r=-0.90; p<0.001) and conductivity(r=-0.78, p<0.001), respectively. These outcomes suggest that NH$_{4}$-N came from external input from the watershed during the monsoon. In both years, mean TN was greater in the mid-lake sites than any other sites. A great amount of TN in the mid-lake was most pronounced in monsoon 1994 because of an accumulated influence of the point sources during low inflow. Overall data suggest that concentrations of TN in this system did not show large differences along the longitudinal gradients and its distributions is likely determined by point-sources rather than inflow regime.

  • PDF

A Study on the Temperature Distribution of Rock Mass at KAERI Underground Research Tunnel: Verification on the Result of Borehole Heater Test (지하처분연구시설(KURT) 내 암반의 온도 분포에 관한 연구 : 시추공히터시험 결과의 검증)

  • Yoon, Chan-Hoon;Choi, Young-Chul;Kwon, Sang-Ki;Choi, Heui-Joo
    • Tunnel and Underground Space
    • /
    • v.23 no.4
    • /
    • pp.297-307
    • /
    • 2013
  • In this study, the thermal analysis is carried out for a result of borehole heater test using ABAQUS ver 6.10 based on finite element analysis code. Thermal-mechanical rock properties as determined by laboratory tests before the in situ test and characteristics of the atmosphere at the test section are used as the initial condition. When comparing the results of the in situ test and thermal analysis, the temperature of C3 observation hole that is 0.9 m away from the heater showed very similar patterns and figures (about $1.3^{\circ}C$ difference). But the results of the A and B observation hole showed a significant difference around $15^{\circ}C{\sim}20^{\circ}C$. To find the reason for these results, the over-coring is carried out for the A1 and B1 observation holes. As a result of checking the excavated rock core with the naked eye, there is no problem on the number and position of the sensor as the test plan. However the state of cement injection in the observation hole is poor.

Epidemiological Characterization of Group A Streptococci Using emm Genotyping from Throat Cultures in Patients with Acute Pharyngitis in Children (소아과 의원을 방문한 급성인두염 환자의 인후배양과 emm 유전자형을 이용한 A군 연쇄구균의 역학조사)

  • Jung, Hyun Ju;Lee, Nam Yong;Kwon, Oh-Young;Maeng, Kook Young;Kim, Sunjoo
    • Pediatric Infection and Vaccine
    • /
    • v.10 no.2
    • /
    • pp.178-185
    • /
    • 2003
  • Purpose : Group A streptococci(GAS) was isolated from the patients with acute pharyngitis. Epidemiological studies using T typing and emm genotyping was performed for GAS and compared with the results of the carriers. Methods : Throat cultures were taken from 246 children(123 boys, 123 girls) from November, 2001 to May, 2002 who visited a pediatrician's office located in Jinju, Gyeongnam province. T types were identified with slide agglutination and emm genotypes were identified with DNA sequencing after amplification of emm genes. Results : One hundred thirty(52.8%) out of 246 children yielded beta-hemolytic streptococci, of which 96.1% were group A. Children from 4 to 7 years old comprised 70.4% of the GAS positive group. T12 were the most common(35.2%) and T non-typeable strains were the next(30.4%). emm12 was most frequent(28.5%), and emm75(18.7%), emm22(13.0%), emm2(12.2%), and emm8(8.1%) were relatively common. Conclusion : Since GAS is so highly prevalent in acute pharyngitis, indeed being half of the population, good clinical practice dictates the systematic employment of throat culture for acute pharyngitis before prescribing antibiotics in a pediatric setting. The distribution of the T antigens and emm genes showed similar pattern between the acute pharyngitis and the carriers.

  • PDF

A Numerical and Experimental Study on Structural Performance of Noncomposite and Composite Eco-Arch Structures subjected to Concentrated Loads (집중하중을 받는 비합성.합성 생태아치구조물의 성능평가를 위한 수치해석 및 모형실험 연구)

  • Kim, Yong-Hee;Park, Jong-Sup;Lee, Young-Ho;Oh, Min-Su
    • Journal of Korean Society of Steel Construction
    • /
    • v.22 no.2
    • /
    • pp.173-183
    • /
    • 2010
  • In this study, noncomposite and composite eco-arch structures with I-beams and precast concrete(PC) decks were investigated. Four finite-element models(a steel-girder model, a steel-girder-and-several-PC-panels model, a three-steel-girder model, and a three-steel-girder-and-several-PC-panels model) using a general finite-element program, ABAQUS, were reviewed to predict the strength of the noncomposite and composite arch structures. Based on the results of the finite- element analysis, the behaviors of the four models were investigated, and deflection and strain gauges for the experimental specimen consisting of three steel girders and several PC panels were set up to obtain the ultimate strength. The ultimate strength of the specimen was estimated to be 1,961kN. The ultimate strength was much larger than the 1,380-kN load calculated using AASHTO LRFD Bridge Design Specifications(2007). The noncomposite and composite arch bridges were found to have enough strength for safety.

Efficiency Algorithm of Multispectral Image Compression in Wavelet Domain (웨이브릿 영역에서 다분광 화상데이터의 효율적인 압축 알고리듬)

  • Ban, Seong-Won;Seok, Jeong-Yeop;Kim, Byeong-Ju;Park, Gyeong-Nam;Kim, Yeong-Chun;Jang, Jong-Guk;Lee, Geon-Il
    • Journal of the Institute of Electronics Engineers of Korea SP
    • /
    • v.38 no.4
    • /
    • pp.362-370
    • /
    • 2001
  • In this paper, we proposed multispectral image compression method using CIP (classified inter-channel prediction) and SVQ (selective vector quantization) in wavelet domain. First, multispectral image is wavelet transformed and classified into one of three classes considering reflection characteristics of the subband with the lowest resolution. Then, for a reference channel which has the highest correlation and the same resolution with other channels, the variable VQ is performed in the classified intra-channel to remove spatial redundancy. For other channels, the CIP is performed to remove spectral redundancy. Finally, the prediction error is reduced by performing SVQ. Experiments are carried out on a multispectral image. The results show that the proposed method reduce the bit rate at higher reconstructed image quality and improve the compression efficiency compared to conventional methods. Index Terms-Multispectral image compression, wavelet transform, classfied inter-channel prediction, selective vetor quantization, subband with lowest resolution.

  • PDF

Profiling Stress History(OCR, $\sigma를$p) of Marine Clay Using Piezocone Penetration Test (해성점토지반에서 CPT를 이용한 응력이력(OCR, $\sigma$를 p)의 산정)

  • 이강운;윤길림;채영수
    • Journal of the Korean Geotechnical Society
    • /
    • v.18 no.6
    • /
    • pp.73-81
    • /
    • 2002
  • Various CPT-based prediction models far profiling stress history of marine clay at the southern part of the Korean peninsula were investigated by using both statistical analysis and case history study. Preconsolidation pressures($\sigma'$p) and overconsolidation ratio(OCR) estimated by empirical correlations and cone penetration tests were compared with those of laboratory odometer test results. Stress history of marine clay determined by odometer test results was in general overconsolidated at below 10m depth from the mudline, whereas marine clay at below l0m depth from the mudline which has an around 0.3 overconsolidation ratio showed variable stresses and unstable states. Preconsolidation pressures were computed by both empirical methods of the Chen and Mayne(1996) and theoretical method of Konrad and Law(1987). It is estimated that Chen and Mayne(1996)'s prediction method based on pore water pressure is more reliable than any other prediction methods, and their method proved to be the most reliable for overconsolidation ratio estimation. However, it is recommended that Mayne & Holtz(1988) and Mayne & Bachus(1988) methods are more suitable than any other methods for predicting the overconsolidation ratio at an underconsolidated (OCR<1) clay. For these reasons, rather than making use of existing prediction models, development of site specific empirical correlations which considers local characteristics and site conditions may be required due to different local stress history and variable soil properties.

The Effect of Uncertainty in Roughness and Discharge on Flood Inundation Mapping (조도계수와 유량의 불확실성이 홍수범람도 구축에 미치는 영향)

  • Jung, Younghun;Yeo, Kyu Dong;Kim, Soo Young;Lee, Seung Oh
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.33 no.3
    • /
    • pp.937-945
    • /
    • 2013
  • The accuracy of flood inundation maps is determined by the uncertainty propagated from all variables involved in the overall process including input data, model parameters and modeling approaches. This study investigated the uncertainty arising from key variables (flow condition and Manning's n) among model variables in flood inundation mapping for the Missouri River near Boonville, Missouri, USA. Methodology of this study involves the generalized likelihood uncertainty estimation (GLUE) to quantify the uncertainty bounds of flood inundation area. Uncertainty bounds in the GLUE procedure are evaluated by selecting two likelihood functions, which is two statistic (inverse of sum of squared error (1/SAE) and inverse of sum of absolute error (1/SSE)) based on an observed water surface elevation and simulated water surface elevations. The results from GLUE show that likelihood measure based on 1/SSE is more sensitive on observation than likelihood measure based on 1/SAE, and that the uncertainty propagated from two variables produces an uncertainty bound of about 2% in the inundation area compared to observed inundation. Based on the results obtained form this study, it is expected that this study will be useful to identify the characteristic of flood.

Characteristics of Tissue Dose of High Dose Rate Ir-192 Source Substitution for Co-60 Brachytherapy Source (코발트-60 선원 대체용 고선량률 Ir-192 선원의 조직선량특성)

  • 최태진;이호준;김옥배
    • Progress in Medical Physics
    • /
    • v.9 no.4
    • /
    • pp.259-266
    • /
    • 1998
  • To achieve the 2D dose distribution around the designed high dose rate Ir-192 source substitution for Co-60 brachytherapy source, we determined the exposure rate constant and tissue attenuation factors as a large depth as a 20 cm from source center. The exposure rate constant is used for apparent activity in designed source with self-absorption and encapsulation steel wall. The tissue dose delivered from the 4401 segments of 2.5 mm in a diameter and 2.5 mm height of disk-type source layer. In the experiments, the tissue attenuation factors include the tissue attenuation and multiple scattering in a medium surrounding the source. The fitted the polynomial regression with 4th order for the tissue attenuation factors are very closed to the experimental measurement data within ${\pm}$1% discrepancy. The Meisberger's constant showed the large uncertainty in large distance from source. The exposure rate constant 4.69 Rcm$^2$/mCi-hr was currently used for determination of apparent activity of source and air kerma strength was obtained 0.973 for tissue absorbed dose from the energy spectrum of Ir-192 source. In our experiments with designed high dose rate brachytherapy source, the apparent activity of Ir-192 source was delivered from the 54.6 % of actual physical source activity through the self-absorption and encapsulation wall attenuations. This paper provides the 2-dimensional dose tabulation from unit apparent activity in a water medium for dose planning includes the multiple scattering, source anisotropy effect and geometric factors.

  • PDF

Plane Experiments for Estimating Performance of the Sluice of Tidal Power Plant (조력발전용 수문 성능평가를 위한 평면 수리모형실험)

  • Oh, Sang-Ho;Lee, Kwang-Soo;Jang, Se-Chul;Lee, Dal-Soo
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.23 no.6
    • /
    • pp.474-481
    • /
    • 2011
  • The discharge coefficient and spatial velocity distribution were clarified by carrying out a physical experiment to assess the performance of sluice for tidal power generation. The physical experiment was performed by manufacturing 10 sluce models whose scale is 1/70 of the prototype and installing it in the planar open channel, which has apron sections in front of and behind the sluice models. In particular, it was attempted to reasonably determine the locations and method of measuring water levels that may affect estimation of the discharge coefficient. Based on the experimental results for various conditions of discharges and tidal levels, the discharge coefficient of the sluice in the experiment was estimated as 1.3 to 1.4. Meanwhile, it was found that velocities were 2~3% faster at the sluices near the central region whereas 4~5% slower at the sluices on both sides, in comparison to the average value of the mean velocities of the ten sluices.