• Aerospace Engineering and Technology
• /
• v.3 no.2
• /
• pp.42-49
• /
• 2004

Analytical solutions are developed to predict temperature of a satellite box during launch stage under the assumption of worst hot condition. The considered time period is from fairing jettison to separation of satellite during launch stage. After fairing jettison, a box mounted on outer surface of satellite are exposed to space environments such as direct solar flux, Earth IR, Albedo, and free molecular heating. The thermal governing equation is simplified to 1st order ordinary differential equation such that analytic solutions are acquired after the box is assumed as a single lumped mass. The analytical solutions are also available for mass varying box. Finally, the practical application is performed for the case of STSAT-1 launch scenario.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.11
• /
• pp.1069-1076
• /
• 2011

All of the satellite components must be operated within the permissible temperature range during the mission in orbit. Therefore, thermal design is performed to develop verified thermal model and to secure thermal stability on the ground. In this study, thermal model correlation was performed to satisfy the criteria of correlation using ground thermal vacuum/thermal balance test results of LEO satellite optical payload. We also secured verified thermal model by controlling operating cycle of flight heaters. In addition, it was confirmed that all components are within the permissible temperature range through conducting orbit environment thermal analysis. We also secured thermal stability of the satellite.

• Aerospace Engineering and Technology
• /
• v.10 no.2
• /
• pp.20-28
• /
• 2011

The electro-optical payload of a low-earth orbit satellite is thermally decoupled with the bus, which supports a payload for a mission operation. The payload has a cooling unit of FPA(Focal Plane Assembly) which has a thermal behavior increasing its temperature instantly during an operation in order to dissipate a waste heat into the space. The FPA cooling unit should include a radiator and heatpipes with a sufficient performance in worst hot condition, and a heater design to maintain its temperature above a minimum allowable temperature in the worst cold condition. In this paper, we analyzed the thermal requirements and the heater design constraints from the thermal analysis results for the current thermal design of the FPA cooling unit and the design elements of the better heater design were found.

• Journal of Astronomy and Space Sciences
• /
• v.23 no.1
• /
• pp.39-54
• /
• 2006

HAUSAT-2 is nano satellite with 25kg mass being developed by Space System Research Lab. in Hnakuk Aviation University. This paper addresses HAUSAT-2 small satellite thermal analyses and its verification at satellite system, electronic box, and PCB levels. Thermal model which is used for system-level and box-level thermal analyses was verified and corrected through thermal vacuum/balance test. The new board-level thermal analysis methodology, modelling high-power dissipating EEE parts directly, was proposed. The proposed methodology has been verified with test results.

• Aerospace Engineering and Technology
• /
• v.2 no.2
• /
• pp.76-82
• /
• 2003

To guarantee the proper functions of a satellite in the extreme space environment, the several test models are developed generally. There are advantages that the design and the analysis of Flight Model(FM) can be validated through these test models, and the functional reliabilities can be increased by reflecting the modifications on the final design of FM. The integration and test of Structure & Thermal Model(STM) of KOMPSAT, being currently developed, have been completed. In this paper, the processes of design and analysis of the STM propulsion system, one of the KOMPSAT modules, are described.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.140.2-140.2
• /
• 2014

인공위성은 우주공간의 고진공 상태와 태양 복사열에 의한 고온 및 극저온이 반복되는 가혹한 환경으로 인해 주요 부품의 기능장애가 초래되므로 발사전 지상에서 열진공 시험장비를 이용한 열진공시험을 수행한다. 위성체의 열진공 시험에 사용되는 열교환기인 베이스플레이트(Baseplate)는 우주 열환경을 모사하기 위하여 직접 방열판 표면에 고온 및 저온의 유체를 공급하여 시험 요구에 따른 필요한 열을 공급하게 된다. 일반적으로 우수한 성능의 위성체 부품의 검증을 위해서 지상의 열환경 시험은 접촉식 히터 및 열교환기를 사용하게 되는데, 이때 적절한 히터 및 블로워 파워를 선정하고 챔버 슈라우드와 열교환에 있어 간섭이 없도록 장비를 운용해야 한다. 본 연구에서는 상용프로그램을 이용하여 열진공 시험용 베이스플레이트에 대하여 전산해석을 수행하였으며, 이를 통해 베이스플레이트 내의 작동 유체의 입구 압력에 의한 열진공 시험용 열교환기의 성능 특성을 관찰하였다.

• Journal of Aerospace System Engineering
• /
• v.17 no.2
• /
• pp.9-15
• /
• 2023

The task of generating a reduced thermal model of a satellite must be performed at least once in a satellite project to shorten the time of orbital thermal analysis and perform thermal analysis coupled to a launch vehicle. Although there are various methods for generating a reduced thermal model, an intuitive and convenient iso-thermal mesh generation method is used the most widely in practice. However, there is still a lack of research on automation of the isothermal mesh generation method. In this paper, we proposed an automated generation method of satellite reduced thermo-mathematical model based on the isothermal mesh generation method considering temperature tolerance and fixed nodes. The proposed method was validated using three different temperature tolerance cases. The average temperature difference satisfied the guidelines of ECSS.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.7
• /
• pp.709-716
• /
• 2009

Thermal condition according to the operation attitude of a satellite in orbit would be essential to be known because the orbit attitude is a dominant factor to affect satellite thermal design. In this paper, the change in space thermal environment and the thermal effect in thermal design are studied for a low earth orbit satellite according to the yaw motion. The present satellite retains sun-pointing attitude during daylight due to the fixed type solar arrays. And it also moves along the orbit with constant yaw motion in a longitudinal axis so that a star tracker which is a star sensor for satellite's attitude control always looks into the deep space. This attitude is considered in its better visibility to the stars for a successful mission operation. Also, it is required to access the corresponding thermal effects due to the yaw motion. Therefore, we try to verify these by the thermal analysis for the satellite thermal model with the yaw motion.

• Current Industrial and Technological Trends in Aerospace
• /
• v.5 no.1
• /
• pp.32-38
• /
• 2007

인공위성 열제어계는 위성의 운용기간 중에 열적 안정성 확보를 목적으로 열설계, 열해석, 필요 하드웨어 선정 및 지상검증시험, 발사후 운용지원을 수행하게 된다. 열제어계는 다른 위성 부분체와는 달리 시스템적인 성격을 가지고 있으며, 위성의 운용궤도 등에 따라서 개발 방향이 달라지게 된다. 특히 위성의 고성능화 및 열적안정성 요구조건의 증대로 인하여 열제어계의 역할이 더욱 커져가고 있다. 본 기술동향에서는 열제어계 설계요건, 적용 목적에 따른 기법, 향후 활용 기술 등의 관점에서 인공위성 열제어계의 개발 동향을 살펴보고자 한다.

• Bulletin of the Korean Space Science Society
• /
• 2004.04a
• /
• pp.45-45
• /
• 2004

현재 개발 중인 저궤도 소형인공위성 발사체, KSLV (Korea Space Launch Vehicle)에 최초로 실리게 되는 ‘발사체 검증위성, KoDSat’ (KSLV Demonstration Satellite)은 발사과정 중에 위성체가 겪게 되는 진동 및 음향레벨 크기를 측정하여 지상국으로 전송하게 된다. 또한 위성체 내부에 설치한 카메라를 이용하여 발사체에서 분리되는 과정을 촬영하여 지상으로 동영상 데이터를 전송하게 된다. 열제어계의 목적은 어떠한 임무기간 동안에도 위성체의 모든 요소들이 각각의 허용 온도범위 내에서 유지되도록 하는데 있다. (중략)