• Journal of Advanced Navigation Technology
• /
• v.18 no.4
• /
• pp.341-346
• /
• 2014

This paper has presented the design and fabrication of phase correlator for wideband digital frequency discriminator (DFD) operating over the 6.0 to 18.0 GHz frequency range. Fabricated DFD phase correlator has been measured I or Q output signal, and analyzed frequency discrimination error. The operation of the proposed mixer type correlator has been analyzed by deriving some analytic equations. To design the phase correlator, this paper has modeled and simulated IQ mixer and 8-way power divider by using RF simulation tool. Designed phase correlator has fabricated and measured. The phase error and frequency discrimination error have been presented using by measured I and Q output signal. Over the 6.0~18.0 GHz range, the root mean square(RMS) phase error is $4.81^{\circ}$, RMS and frequency discrimination error is 1.49 MHz, RMS.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.10
• /
• pp.1-6
• /
• 2009

We derive the phase error of hologram due to imperfection of a wave plate, the azimuth angle error of a wave plate, and the azimuth angle error of a linear polarizer. Also, we analyze the effect of phase error by the modified triangular interferometer in case of 3-D image reconstruction of hologram.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.1
• /
• pp.1-11
• /
• 2008

To overcome the mid frequency limitation of geometrical acoustic techniques, the phased geometrical method was suggested by introducing the phase information into the sound propagation from the source. By virtue of phase information, the phased tracing method has a definite benefit in taking the interference phenomenon at mid frequencies into account. Still, this analysis technique has suffered from difficulties in dealing with low frequency phenomena, so called, wave nature of sound. At low frequencies, diffraction at corners, edges, and obstacles can cause errors in simulating the transfer function and the impulse response. Due to the use of real valued absorption coefficient, simulated results have shown a discrepancy with measured data. Thus, incorrect phase of the reflection characteristic of a wall should be corrected. In this work, the uniform theory of diffraction was integrated into the phased beam tracing method (PBTM) and the result was compared to the ordinary PBTM. By changing the phase of the reflection coefficient, effects of phase information were investigated. Incorporating such error compensation methods, the acoustic prediction by PBTM can be further extended to low frequency range with improved accuracy in the room acoustic field.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.12C
• /
• pp.1149-1155
• /
• 2007

In this paper, we propose a new overlap and add speech synthesis method which demonstrates improved continuity performance. The proposed method uses a weighted phase error function and minimizes the wave discontinuity of the synthesis signal, rather than the phase discontinuity, to estimate the mid-point phase. Experimental results show that the proposed method improves the continuity between the synthesized signals relative to the existing method.

• Progress in Medical Physics
• /
• v.3 no.2
• /
• pp.43-57
• /
• 1992

Phase detector techique provides a unique probe to membrane recycling phenomenon by enabling dynamic monitoring of cell membrane capacitance. However, it has inherent errors due to constant changes in measurement environments. The present study analyzed several error sources to develope application criteria of this technique. and the following was found based on a theoretical analysis. The initial phase angle has to be appropriately selected to minimize the error due to perturbation of access and membrane conductances. Excitation frequency is also important to determine the initial phase angle. However. deviation of the phase angle from a predetermined initial value during the measurement period does not affect capacitance estimation to a significant degree. Despite an appropriate initial phase selection an error in scaling factor is expected for a large increase in capacitance during exocytosis. which may be overcome by iteratively correcting the scaling factor over the measurement period. These results will provide a useful guideline in practical application of this technique.

• Journal of Advanced Navigation Technology
• /
• v.8 no.1
• /
• pp.26-37
• /
• 2004

Consistent and realistic error covariance information is important for position estimation, error analysis, fault detection, and integer ambiguity resolution for differential GNSS. In designing a position domain carrier-smoothed-code filter where incremental carrier phases are used for time-propagation, formulation of consistent error covariance information is not easy due to being bounded and temporal correlation of propagation noises. To provide consistent and correct error covariance information, this paper proposes two recursive filter algorithms based on carrier-smoothed-code techniques: (a) the stepwise optimal position projection filter and (b) the stepwise unbiased position projection filter. A Monte-Carlo simulation result shows that the proposed filter algorithms actually generate consistent error covariance information and the neglection of carrier phase noise induces optimistic error covariance information. It is also shown that the stepwise unbiased position projection filter is attractive since its performance is good and its computational burden is moderate.

• Journal of Advanced Navigation Technology
• /
• v.9 no.2
• /
• pp.140-146
• /
• 2005

In this paper, we proposed the frequency offset compensation algorithm and tracking algorithm which could improve the accumulated phase error for HDR-WPAN system. The proposed frequency offset compensation technique estimated each sample phase error by autocorrelation characteristics of CAZAC sequence, estimated phase error multiple each sample in a symbol, and finally compensated for the frequency offset. After frequency offset compensation using two steps, coarse and fine frequency offset, tracking algorithm have to use to compensate for the accumulated phase error. Because there is no pilot symbol in payload, more phase rotation occurred in received signal constellations due to the accumulated phase error as the payload length increase. Tracking algorithm compensates for a cumulative phase error ${\theta}$ between payload data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.2A
• /
• pp.155-163
• /
• 2009

OFDM System is a promising transmission technique due to its spectral efficiency But, a major disadvantage of the OFDM system is its sensitivity to frequency offset and phase noise that makes intercarrier interference (ICI), which degrades the system performance severely The ICI self-cancellation method has a good performance with frequency offset or phase noise. This paper proposed the N/2 spacing data-conjugate method that works well in large frequency offset and phase noise (normalized frequency offset=0.2-0.4, phase noise standard deviation=about lodes). Also, an efficiency ICI cancellation method using pilot was proposed. Simulation results confirm that performance of the proposed scheme is better than conventional schemes.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.451-452
• /
• 2014

본 논문에서는 단상 계통연계형 컨버터의 전원 위상각을 추종함에 있어 필수적인 전압 센서의 옵셋 오차에 대한 영향을 분석하고 이를 검출 및 보상하기 위한 알고리즘을 제안하였다. 전원전압 측정에 따른 옵셋 오차는 전원 주파수의 1배 맥동을 야기하여 전원 위상각이 왜곡된다. 왜곡된 전원 위상각에 의한 좌표변환시 동기 좌표계 dq축 전류에 전원 주파수 1배의 맥동을 야기하며 이는 계통측 상전류에 직류성분과 전원 주파수 2배의 고조파 성분을 발생시키게 된다. 따라서, 본 논문에서는 전원측정시 야기되는 옵셋 오차의 영향을 분석하고 이의 검출신호로 전원 위상각 제어기의 적분출력을 선정하였다. 또한 RMS(Root Mean Square) 기법을 이용하여 옵셋 성분을 검출 및 보상하는 알고리즘을 제안하였다. 제안된 알고리즘의 성능은 시뮬레이션과 실험을 통하여 검증하였다.

• Korean Journal of Remote Sensing
• /
• v.31 no.2
• /
• pp.101-110
• /
• 2015

Synthetic Aperture Radar Interferometry (InSAR) is affected by various noise source such as atmospheric artifact, orbital error, processing noise etc.. Especially, one of the dominant noise source for long-wave SAR system, such as ALOS PALSAR (L-band SAR satellite) is the ionosphere effect because phase delays on radar pulse through the ionosphere are proportional to the radar wavelength. To avoid misinterpret of phase signal in the interferogram, it is necessary to detect and correct ionospheric errors. Recently, a MAI (Multipler Aperture SAR Interferometry) based ionospheric correction method has been proposed and considered one of the effective method to reduce phase errors by ionospheric effect. In this paper, we introduce the MAI-based method for ionospheric correction. Moreover we propose an efficient method that apply the method over non-coherent area using directional filter. Finally, we apply the proposed method to the ALOS PALSAR pairs, which include the west sea coast region in Korea. A polynomial fitting method, which is frequently adopted in InSAR processing, has been applied for the mitigation of phase distortion by the orbital error. However, the interferogram still has low frequency of Sin pattern along the azimuth direction. In contrast, after we applied the proposed method for ionospheric correction, the low frequency pattern is mitigated and the profile results has stable phase variation values within ${\pm}1rad$. Our results show that this method provides a promising way to correct orbital and ionospheric artifact and would be important technique to improve the accuracy and the availability for L-band or P-band systems.