• Journal of the Korean Geotechnical Society
• /
• v.20 no.1
• /
• pp.61-73
• /
• 2004

Rayleigh wave and Love wave are the major elastic waves belonging to the category of the surface wave. The fact that Love wave is not contaminated by P-wave makes Love wave superior to Rayleish wave and other body waves. Therefore, the information that Love wave carries is more distinct and clearer than the information of Rayleigh wave. In this study, for the purpose of employing Love wave in the SASW method, the dispersion characteristics of the Love wave were extensively investigated by the theoretical, numerical and experimental approaches. The 2-D and 3-D finite element analyses for the half space and two-layer systems were performed to determine the phase velocities from Love wave as well as from both the vertical and the horizontal components of Rayleigh wave. Also, the SASW measurements were performed at the geotechnical sites to verify the results obtained by the numerical analysis. The results of the numerical analysis and the field testing indicated that the dispersion characteristics of Love wave can be an extended information to make better evaluation of the subsurface stiffness structure by SASW method.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.6
• /
• pp.17-24
• /
• 2010

This study was performed to make a close inquiry into a pseudo 3-dimensional structure of the liquid-propellant spray emerging from nonimpinging-type injector. Spray configuration near the injector exit was captured by a high-speed camera, and then its periodic phenomena (shedding) was observed. Detailed spatial structure of spray was investigated by spray characteristic parameters (velocity, diameter, volume flux, etc.) with the aid of a Dual-mode Phase Doppler Anemometry (DPDA). Experiment was carried out at various locations along the geometric axis of the nozzle orifice and on the plane normal to the spray stream with the injection pressures of 17.2 to 27.6 bar.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.141-144
• /
• 2009

An injector plays an important role in the process of an efficient combustion in liquid-rocket engines (LRE). This paper is focused on the injection performance of a small LRE-injector by employing the spray characteristic parameters made up of the velocity, Sauter mean diameter, and turbulence intensity. An experimental investigation is carried out with the aid of a dual-mode phase Doppler anemometry (DPDA) according to the injection pressure variation and along transverse axis, spatially. The Weber number and Reynolds number are used to characterize the atomization and turbulence nature of injector spray.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.135-138
• /
• 2007

Two-dimensional distribution characteristics on the spray droplets emanating from an injector employed in a liquid-propellant thruster are investigated through dual-mode phase Doppler anemometry (DPDA). Spray-breakup characteristic parameters such as spray droplet velocity, turbulent intensity, Sauter mean diameter (SMD), number density, and volumetric flux are quantified to scrutinize the macroscopic behavior of injector-spray breakup. The present study will be able to contribute to the comprehension for performance features of the thruster in current use and to the design engineering of a brand-new thruster as well.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.5
• /
• pp.1-8
• /
• 2008

Dual-mode Phase Doppler Anemometry (DPDA) was used to scrutinize the spatial distribution characteristics of spray emanating from a small Liquid-Rocket Engine (LRE) injector. Droplet size and velocity were measured according to the variation of injection pressure along the plane normal to the spray stream and then the spray characteristic parameters such as Arithmetic Mean Diameter (AMD), Sauter Mean Diameter (SMD), number density, span of drop size distribution, and volume flux were deduced for an investigation of spray breakup characteristics. As the injection pressure increases, the number density, span, and volume flux of spray droplets become higher, whereas the AMD gets smaller.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.5
• /
• pp.31-37
• /
• 2014

In situ investigations and laboratory tests using elastic wave have become popular in geotechnical and geoenvironmental engineering. Propagation velocity of elastic wave is the key index to evaluate the ground characteristics. To evaluate this, various methods were used in both time domain and frequency domain. In time domain, the travel time can be found from the two points that have the same phase such as peaks or first rises. Cross-correlation can also be used in time domain by evaluating the time shift amount that makes the product of signals of input and received waveforms maximum. In frequency domain, wave propagation velocity can be evaluated by computing the phase differences between the source and received waves. In this study, wave propagation velocity evaluated by the methods listed above were compared. Bender element tests were conducted on the specimens cut from the undisturbed hand-cut block samples obtained from Block 37 excavation site in Chicago, IL, US. The evaluation methods in time domain provides relatively wide range of wave propagation velocities due to the noise in signals and the sampling frequency of data logger. Frequency domain approach provides relatively accurate wave propagation velocities and is irrelevant to the sampling frequency of data logger.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.2
• /
• pp.127-133
• /
• 2012

In this paper, the concerned CMA (Constant Modulus Algorithm) adaptive equalizer convergence rate and residual inter-symbol interference using cost function in order to improved to the ACMA (Advanced CMA). The CMA method compensates amplitude but does not compensate phase. On the other hand, The RCA (Reduced Constellation Algorithm) method compensates both the amplitude and the phase but it has the convergence rate problem. MCMA method is a way to solve the phase problem of CMA method compensates both the amplitude and the phase after respectively calculating the real and imaginary components. But it is more than poor CMA method in the complexity of hardware and the compensation performance. The cost function can advantages by improving the CMA and a MCMA (Modified CMA) equalizer so that the amplitude and phase retrieval the equalization steady-state to reduce the error by using ISI and faster convergence rate and performance is good SER (Symbol Error Ratio) was confirmed by computer simulations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.4
• /
• pp.576-585
• /
• 2001

In this paper, we investigated the method of compensation for optical pulse shape distortion due to both chromatic dispersion and SPM(self phase modulation) in a single mode fiber We selected MSSI(mid-span spectral inversion) as compensation method using OPC(optical phase conjugator). We used EOP(eye-opening penalty) parameter in order to evaluate the efficiency of waveform distortion compensation. In this paper, we induced optimum pump power level in optical phase conjugator through analytic method of computer simulation. And we investigated input signal power range being able to maintain stable reception performance under the condition of optimum pump power. We verified the possibility of high performance optical transmission system realization through the inducement and application of optimum pump power, input signal power and in-line amplifier spacing, because power control is important in the compensation for optical pulse distortion.

• Korean Journal of Crystallography
• /
• v.12 no.1
• /
• pp.31-36
• /
• 2001

결정학의 핵심 과제는 위상(phase) 문제의 해결이다. 이 위상 묹를 해결하는 한 방법으로 요즘의 고속 컴퓨터를 사용하는 시행착오법(trial and error method)을 가상해 볼 수 있다. 간단한 예를 들면, centrosymmetric인 삼사정계(triclinic system)에 속한 비교적 작은 유기화합물인 경우, 전형적으로 3000개 정도의 회절 강도가 측정된다. Centrosymmetric 공간군(space group)의 구조 인자(structure factor)는 위상이 0°이거나 180°이기 때문에, 구조 인자는 "+"이거나 "-"부호를 가지므로 3000개 각각에 두 가지 부호를 배당할 수 있다. 이 3000개의 부호를 조합할 수 있는 개수는 2/sup 3000/개로 이 개수만큼의 Fourier 지도들을 작도하면 그 중의 하나는 옳은 것이다. Fourier 지도 한 개를 작도하는데 1분이 소요된다고 가정하면, 이들을 모두 계산하는데 2/sup 2981/년의 계산 시간이 소요된다. (참고로 2/sup 10/=1084). 따라서 시행착오법으로는 도저히 불가능함을 알 수 있다. 더구나, noncentrosymmetricc 공간군에서는 더욱 어렵게 된다. 그리하여 위상 문제를 해결하려는 많은 시도가 행해졌는데, 그것들 중의 하나가 Patterson 방법이다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.6
• /
• pp.690-697
• /
• 2010

In this paper we propose an opposite-sign phase method to implement a nulling antenna using genetic algorithm. In the opposite-sign phase method the phase value of each antenna element in the linear phased array antenna is symmetrical to the center of the array and the sign of the phases of the neighboring elements is alternating. Compared to the conventional genetic algorithm our genetic algorithm shows the capability of synthesizing nulls faster and sharper.