• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.374-379
• /
• 2004

H-브릿지 멀티레벨 인버터는 여러 개의 단상 Power Cell을 직렬로 연결함으로써 저전압 전력용 반도체를 사용하여 고전압을 얻을 수 있고, 정현파에 가까운 출력전압 파형을 얻을 수 있는 멀티레벨 인버터 토폴로지이다. 본 토폴로지는 출력전압 레벨에 비례하여 Power Cell의 수가 증가하므로, 주제어기의 연산능력에 대한 부담증가와 신호선의 많아지는 단점이 있다. 따라서 Power Cell제어를 직접적인 PWM 신호가 아닌 통신을 사용함으로써 이러한 단점을 극복할수 있으며, 신뢰성 측면이나 보수/유지 측면에서도 유리하다. 본 논문은 산업현장에서 신뢰성을 인정받아 많이 사용되고 있는 직렬통신 방식의 일종인 CAN통신 인터럽터를 이용한 H-브릿지 멀티레벨 인버터 Power Cell의 PWM 동기화 및 위상 전이 방법에 관한 것이다. 제안된 방법의 주요 장점은 주제어기와 셀 제어기 사이에 직렬통신(CAN)을 사용함으로써 주제어기와 셀 제어기의 신호선의 단순화, 주제어기의 부담 감소, Power Cell의 모듈화, 셀 단위의 보호동작 용이, 확장성 향상 그리고 제어 신호 및 Power Cell의 신뢰성을 향상에 있다. 13레벨로 구성된 H-브릿지 멀티레벨 인버터 시험을 통해 제안된 방법의 타당성과 신뢰성을 입증하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.7A
• /
• pp.433-439
• /
• 2003

In this paper, we proposed a novel true time-delay (TTD) feeder for phased array antennas (PAAs) using fiber Bragg gratings (FBGs) and fibers coated with Cr/Au film. This structure requires less number of FBGs than the previously proposed FBG TTD feeders since one FBG is replaced with a metal film reflector in a strand of optical delay line connected to each antenna element and also provides the flexible wavelength selection since the metal film shows wide reflectance spectrum. A TTD for 10 GHz linear PAAs capable of steering beams in three different directions at 0$^{\circ}$and $\pm$30$^{\circ}$has been built. Experimental results on time delays are in good agreement with those calculated at all the steering angles. A 10 GHz linear array antenna with eight antenna elements red from the proposed TTD has been designed and the far-field radiation pattern or this antenna has been obtained by simulation.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.2
• /
• pp.107-114
• /
• 2007

Islanding of PV systems occurs when the utility grid is removed but the PV systems continue to operate and provide power to local loads. Islanding is one of the serious problems in an electric power system connected with dispersed power sources. This can present safety hazards and the possibility of damage to other electric equipments. In the passive method, the voltage and frequency of PCC are measured and it determines islanding phenomena if their values excess the allowed limits. If the real and reactive power of RLC load and those of the PV system are closely matched, islanding phenomena can't be detected by the passive methods. Several active methods were proposed to detect islanding operation in the region where the passive method can not detect it. The most effective method is SFS method which was suggested by Sandia National Laboratory. In this paper, a new islanding detection method using automatic phase-shift is proposed and its validity is verified through the simulation and experimental results.

• 한국해양학회지
• /
• v.22 no.2
• /
• pp.71-79
• /
• 1987

We studied the annual variation of water temperatures in the upper 200m off southeast coast of Korea by means of harmonic analysis of the temperatures at 10 standard depths of 51 stations. The distributions of the mean temperature in coastal zone are almost parallel to the coast, whereas those in offshore are almost zonal. With an increase of depth, the annual amplitude decreases nearly exponentially and the annual phase increases nearly linearly. The average e-folding depth for the annual amplitudes is 65m, vertical change of the annual phase is 180 per 200m, and the vertical eddy conductivity is $4\textrm{cm}^2/sec$. Annual variations of temperatures in the coastal zone of a few tens miles from the coast are considerably different from those in offshore area. The e-folding depths in coastal zone are shallower than those in offshore region, and the changes of phase with depths in coastal zone are smaller than those in offshore region.

• The Journal of Korean society of community based occupational therapy
• /
• v.4 no.2
• /
• pp.53-61
• /
• 2014

Objective : The purpose of this study was to examine the effects of video observation training on neglect and ability to perform activities of daily living of stroke patients. Methods : Patients diagnosed with stroke were selected as subjects according to criteria to select the research targets. The additional video observation training besides OT and PT was carried out to 15 patients in an experimental group and sham therapy besides OT and PT was performed to 15 patients in a control group. Line-bisection test were conducted to compare the neglect before and after therapy intervention and FIM was conducted to compare the ability to perform the activities of daily living. Results : The result of this study that we found out that degree of neglect in an experimental group where video observation training was carried out improved neglect and the ability to perform activities of daily living. Conclusion : The video observation training the video observation training is expected to be useful in clinics.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.2026-2028
• /
• 2002

본 논문에서는 실리콘 기판상의 전송선로 특성을 개선하기 위하여 표면 마이크로머시닝 기술을 이용하여 $10{\mu}m$ 두께의 다공질 실리콘 산화막으로 제조된 기판 위에 에어브리지를 가진 CPW 전송선로와 phase shifter를 제작하였다. 간격이 $30{\mu}m$, 신호선이 $80{\mu}m$인 CPW 에어브리지 전송선의 삽입손실은 4 GHz에서 -0.25 dB이며, 반사손실은 -28.9 dB를 나타내었다. CPW phase shifter의 크기는 S-W-$S_g$ = 100-30-400 ${\mu}m$로 설계되었다. "ㄷ" 모양을 가진 에어브리지의 폭은 $100{\mu}m$. 길이는 400-460-400 ${\mu}m$이다. 낮은 손실을 얻기 위한 Step된 에어브리지를 가진 phase shifter 구조가 step이 없는 에어브리지를 가진 구조보다 삽입손실이 보다 더 향상되었다. 제작된 CPW phase shifter의 위상특성은 28 GHz의 넓은 주파수 범위에서 $180^{\circ}E 의 천이를 타나내었다. 이상과 같은 결과로부터 두꺼운 다공질 실리콘은 고 저항 실리콘 집적회로 공정에서 고성능 저가의 마이크로파 및 밀리미터파 회로 응용에 충분히 활용 될 수 있으리라 기대된다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.5
• /
• pp.10-16
• /
• 2000

This paper presents new double-sided 3-dB branch-line coupler using CPW-to-Microstrip via-hole transitions for the multi-layer applications. The characteristic impedance is obtained using the even-odd mode method, and the circuit performance Is accurately estimated by the Finite Difference Time Domain(FDTD) method. The fabricated double-sided 3-dB branch-line coupler has less than 0.3 dB power dividing imbalance and 1。 phase imbalance, greater than 30 dB isolation, and 25 dB return loss over a 20% bandwidth centered at 2 GHz. Calculated and fabricated results show that this coupler provides better performance as compared to the conventional microstrip branch-line couplers.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.4
• /
• pp.967-975
• /
• 2010

Image segmentation is one of the first steps leading to image analysis and interpretation, which is to distinguish objects from background. However, the active contour model can't exactly extract the desired objects because the phase only is 2. In this paper, we propose the method which can find the desired contours by composing the initial curve near the objects which have intensities of special range. The initial curve is calculated by the histogram equalization, the Gaussian equalization, and the threshold. The proposed method reduce the calculation speed and exactly detect the wanted objects because the initial curve set near by interested area. The proposed method also shows more efficient than the active contour model in the results applied the CT and MR images.

• Progress in Medical Physics
• /
• v.27 no.2
• /
• pp.79-85
• /
• 2016

The objective of this study is to increase the accuracy of dose transmission in radiation therapy using two types of treatment tables, standard exact couch (Varian 21EX, Varian Medical Systems, Milpitas, CA) and 6D robotic couch (Novalis, BrainLAB A.G., Heimstetten, Germany)). We examined the dose attenuation based on the two types of treatment tables and studied the dose of attenuation using the phase (In/Out) for the standard exact couch. We measured the relative dose according to the incident angle of a penetrative photon beam under a treatment table. The incident angle of the photon beam was from $0^{\circ}$ to $360^{\circ}$ in the increments of $5^{\circ}$. The reference angle was set to $0^{\circ}$. Furthermore, the relative dose of the 6D robotic couch was measured using 6 MV and 15 MV, and that of the standard exact couch was measured at the sliding rail position (In-Out) using 6 MV and 10 MV. In the case of the standard exact couch, the measured relative dose was 16.53% (rails at the "In position," $175^{\circ}$, 6 MV), 12.42% (rails at the "In position," $175^{\circ}$, 10 MV), 13.13% (rails at the "Out position," $175^{\circ}$, 6 MV), and 9.96% (rails at the "Out position," $175^{\circ}$, 10 MV). In the case of the 6D robotic couch, the measured relative dose was 6.82% ($130^{\circ}$, 6 MV) and 4.92% ($130^{\circ}$, 15 MV). The photon energies were surveyed at the same incident angle. The dose attenuation for an energy of 10 MV was 4~5% lower than that for 6 MV. This indicated that the higher photon energy, lesser is the attenuation. The results of this study indicated that the attenuation rate for the 6D robotic couch was confirmed to be 1% larger than that for the standard exact couch at 6 MV and $180^{\circ}$. In the case of the standard exact couch, the dose attenuation was found to change rapidly in accordance with the phase ("In position" and "Out position") of the sliding rail.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.10
• /
• pp.1131-1137
• /
• 2014

In this paper, oscillator with compact hairpin resonator is used to design the local oscillator of X-band radar system. The proposed hairpin resonator is minimized by increasing capacitance of line end of conventional one. By this method, size can be minimized about 40% compared with the conventional resonator and also can improve phase noise characteristic. The result of oscillator using proposed hairpin resonator is measured in oscillating frequency of 9.05 GHz, output power of 2.47 dBm, and phase noise of -101.4 dBc/Hz. The fabricated oscillator in this paper can minimize design and it's planar structure makes it easy to design MMIC.