• Title/Summary/Keyword: 위상동기화장치

Search Result 17, Processing Time 0.03 seconds

Digital Phase-Locked Loop(DPLL) Technique for UPS (무정전 전원장치용 디지털 위상동기화 기법)

  • 김제홍;최재호
    • The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.11 no.3
    • /
    • pp.106-113
    • /
    • 1997
  • In uninterruptible power supply(UPS), a high speed phase control is usually required to compensate transients in the output voltage at the instant of transfer from the ac line to the inverter when the ac line fails or backs to the ac line in case of the inverter fails. To overcome this problem, this paper pre¬sents the closed digital phase-locked loop(DPLL) techniques designed by full software with TMS320C31 digital signal processor and describes the functional operation of the proposed DPLL. Fi¬nally, the performance of the proposed DPLL is shown and discussed through simulation and experiment.

  • PDF

The Development of Prototype Synchronized Phasor Measurement Device for Real-time Power System Monitoring (전력계통 실시간 감시를 위한 동기위상측정장치의 시작품 개발)

  • 김학만;전진홍;김종율;남기영
    • Journal of Energy Engineering
    • /
    • v.11 no.3
    • /
    • pp.230-236
    • /
    • 2002
  • In real-time power system control, it is essential to measure the power system variables which are voltage, current, real and reactive power, power factor, system frequency and etc. These variables can be estimated or calculated by the synchronized phasor informations of voltage and current. Therefore, the synchronized phasor measurement of voltage and current is very important to real-time power system control. So, we develop SPMD (Synchronized Phasor Measurement Device) for synchronized phasor measurement of voltage and current. In this paper, we present the design and implementation of SPMD for real-time phasor measurement and the test results of developed SPMD on 380 V 3 phase distribution line in laboratory with resistor load and RTDS (Real Time Digital Simulator).

Design of Wireless Equipment for Position Detection of Train Using the PDOA(Phase Difference of Arriving) (위상차를 이용한 열차 위치검지를 위한 무선장치 설계)

  • Jeong, Rag-Gyo;Yoon, Yong-Ki;Cho, Hong-Sik;Lee, Byung-Song;Chung, Sang-Ki;Kim, Young-Seok
    • Proceedings of the KIEE Conference
    • /
    • 2003.04a
    • /
    • pp.415-417
    • /
    • 2003
  • TOA(Time of Arrival) 및 TDOA(Time Difference of Arrival)경우 무선국의 시간동기화를 위해서 고도의 기술을 요구하고 있으며, 시간동기오차에 따른 위치검지의 정밀도가 낮아지는 문제가 있어 이를 극복하기 위하여 위상차를 이용한 새로운 열차검지기법의 제안에 따른 구현을 위하여 무선장치 설계에 대하여 기술하고자 한다. 본 시스템은 전파의 전달 속도($\lambda$)를 응용하여 기준 주파수인 1.5MHz를 송신 시스템과 수신 시스템의 기준 주파수와 비교하여 그 위상의 차이를 비교하여 지연된 시간을 구한 후 이를 거리로 환산하는 시스템으로서 무선장치와 S/W로 구분하여 구현 설계하였다.

  • PDF

Electric Power System State Estimation with Voltage Phasor Measurements (전압 페이저 측정데이터를 이용한 전력계통 상태추정 기법)

  • Kim Hong Rae;Kwon Hyung Seok
    • Proceedings of the KIEE Conference
    • /
    • summer
    • /
    • pp.168-170
    • /
    • 2004
  • 현대의 전력회사들은 전력계통의 현재 운용상황을 파악하기 위하여 상태추정을 사용한다. 상태추정기는 계통 내 각 지점에서 측정된 전력이나 전압, 전류등의 데이터를 이용하여 반복연산을 수행함으로써 전력계통의 상태(voltage profile)를 추정한다. 이때, 모든 데이터는 동시에 측정이 되었다는 가정 하에 상태추정 연산에 이용되지만, 실제로 모든 데이터 측정의 동기성을 확보하는 것은 사실상 불가능하다. 최근 인공위성에 의해 동기화된 페이저 측정장치가 전력계통 운용에 사용되고 있으며 본 논문에서는 이렇게 이미 이용 가능한 페이저 측정 데이터를 상태추정에 이용하는 방법을 시도하였다. 위성에 의해 동기화된 페이저 측정데이터는 데이터 측정의 동기성 확보뿐만 아니라, 데이터의 정밀도 및 위상각의 직접적인 측정이라는 둥의 여러 가지 면에서 매우 효용성이 높은 데이터이다. 본 연구를 통해 개발된상태추정 프로그램은 IEEE 14모선 시험계통을 이용하여 그 타당성을 검증하였다.

  • PDF

A Study on the Synchronization Methodology for Grid-connection of Three Phase Inverter (3상 인버터의 계통 연계를 위한 동기화 방법론에 대한 연구)

  • Lim, Byeong-Seok;Lee, Joon-Seong;Nguyen, Hoang-Nhan;Tran, Van-Thanh;Ko, Yun-Seok
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.14 no.5
    • /
    • pp.951-958
    • /
    • 2019
  • For the power grid-connection of distributed generation, the output voltage of the distributed generation must be synchronized with the grid voltage before the grid-connection. In this paper, a vector control based synchronization algorithm was developed for grid linkage of three-phase inverters. A three-phase voltage inverter was designed and fabricated to verify the effectiveness of the developed algorithm. The main controller of the three-phase inverter was developed based on DSP, and the electrical level of the system was set to an electrical level that can be tested in the laboratory. Throughout the experiments, it was confirmed that the proposed algorithm could be used as a synchronization algorithm for grid-connection by showing that the output voltage of the three-phase inverter is synchronized with the grid voltage.

Acquisition Behavior of a Class of Digital Phase-Locked Loops (Digital Phase-Locked Loops의 위상 포착 관정에 관한 연구)

  • 안종구;은종관
    • Journal of the Korean Institute of Telematics and Electronics
    • /
    • v.19 no.5
    • /
    • pp.55-67
    • /
    • 1982
  • In this Paper new results relating to the acquisition behavior of a class of first-and secondorder digital phase-locked loops (DPLL) originally proposed by Reddy and Cupta are presented in the absence of noise. It has been found that the number of quantization levels L and the number of phase error states N play important roles in acquisition. For a given L-level quantizer, as N increases, the acquisition time increases, and the lock range decreases. However, the deviation of the steady state phase error decreases in this case. When L increases, the acquisition time decreases, and the lock range increases. However, variation of L affects little for the steady state phase error. In addition, the effects of a loop filter on acquisition have also been considered. One can get smaller acquisition time and larger lock range as the filter parameter value becomes larger. However, deviation of the steady state phase error increases in that case. Analytical results have been verified by computer simulation.

  • PDF

Modular design of solid-state Marx modulator for 40kV nanosecond pulse (40kV 나노초 펄스발생용 모듈형 solid-state Marx modulator 설계)

  • Bae, Jung-Soo;Kim, Tae-Hyun;Son, Seong-Ho;Yu, Chan-Hun;Kim, Hyoung-Suk;Jang, Sung-Roc
    • Proceedings of the KIPE Conference
    • /
    • 2020.08a
    • /
    • pp.233-235
    • /
    • 2020
  • 본 논문은 40 kV 나노초 펄스발생을 위한 모듈형 solid-state Marx modulator(SSMM) 설계에 대해 기술한다. 가속기 및 플라즈마 어플리케이션과 같은 다양한 응용분야에 요구되는 전압 및 전류 사양을 만족시키기 위해 10 kV(출력 전압), 50 ns(펄스폭), 20 ns(상승&하강 시간), 100 kHz(반복률)의 사양을 만족하는 단위모듈기반으로 모듈형 설계를 제안한다. 독립적인 제어가 가능한 4개의 단위모듈을 기반으로 제안된 SSMM은 임의의 출력 파워 및 임피던스를 만족시킬 수 있는 장점을 가지고 있다. 예를 들어, 모든 단위모듈의 위상을 같게 했을 때 출력전압을 증가시킬 수 있으며 각 모듈의 위상을 지연하였을 경우는 펄스의 반복률을 크게 높일 수 있다. 개발된 SSMM은 직렬 스택 MOSFET의 스위칭 성능을 향상시키기 위해 게이트 구동 회로는 동기 신호와 구동 전력을 제공하는 1 턴 변압기로 설계되었다. 출력 펄스의 폭과 하강시간을 최소화하기 위해 다이오드 대신 기생 커패시턴스에 저장된 에너지를 빠르게 방출하는 액티브 풀다운 회로가 적용되었다. 또한, 출력 펄스의 빠른 상승을 달성하기 위해 게이트의 라인 인덕턴스를 최소화하고 모든 게이트 신호의 동기화는 필수적이다. 개발된 ns급 펄스전원장치는 단위모듈을 기반으로 최대 펄스전압이 40 kV 까지 출력이 가능하며 이에 대한 상세설계 및 구현은 실험결과를 바탕으로 검증한다.

  • PDF

Development of LabVIEW Program for Lock-In Infrared Thermography (위상잠금 열화상장치 제어용 랩뷰 프로그램 개발)

  • Min, Tae-Hoon;Na, Hyung-Chul;Kim, Noh-Yu
    • Journal of the Korean Society for Nondestructive Testing
    • /
    • v.31 no.2
    • /
    • pp.127-133
    • /
    • 2011
  • A LabVIEW program has been developed together with simple infrared thermography(IRT) system to control the lock-in conditions of the system efficiently. The IR imaging software was designed to operate both of infrared camera and halogen lamp by synchronizing them with periodic sine signal based on thyristor(SCR) circuits. LabVIEW software was programmed to provide users with screen-menu functions by which it can change the period and energy of heat source, operate the camera to acquire image, and monitor the state of the system on the computer screen. In experiment, lock-in IR image for a specimen with artificial hole defects was obtained by the developed IRT system and compared with optical image.

Analysis on GNSS Spoofing signal effects using SDR receiver (SDR 수신기를 이용한 위성항법 기만신호 효과도 분석)

  • Cho, Ji-haeng
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.19 no.2
    • /
    • pp.97-102
    • /
    • 2019
  • The GNSS(Global Navigation Satellite System) provides important information such as Position and Navigation, Timing(PNT) to various weapon systems in the military. as a result, applications that employ satellite navigation systems are increasing. therefore, a number of studies have been conducted to deceive the weapon systems that employ GNSS. GNSS spoofing denotes the transmission of counterfeit GNSS-like signals with the intention to produce a false position and time within the victim receiver. In order to deceive the victim receiver, spoofing signal should be synchronized with GNSS signal in doppler frequency and code phase, etc. In this paper, Civilian GPS L1 C/A spoofing signals have been evaluated and analyzed by SDR receiver.