• Korean Journal of Optics and Photonics
• /
• v.19 no.3
• /
• pp.175-181
• /
• 2008

We develop a fiber optic acceleration sensor with LED, PD, POF, and a cantilever beam, having film grating at the edge of the beam. Light is transmitted from LED to PD through the film grating. When the cantilever beam moves by external vibration, output light is modulated as sinusoidal signals. The characteristics of output signals are dominated by the spacing of the film grating and also by the size and the elasticity of the beam. Two output signals, having constant initial phase difference, are obtained by two gratings with 90 degree phase difference. Those two signals are used to determine phase angle, which is proportional to the displacement of the beam. Finally, the acceleration is determined from conversion equation between displacement and acceleration. This sensor is designed for monitoring the vibration of large and complex building in the low frequency range of below 7 Hz, and is particularly suitable to measure acceleration in electromagnetic environments.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.3
• /
• pp.419-425
• /
• 2020

In this paper, when a refractive index grating and a gain grating are simultaneously present in a DFB (Distributed Feedback) laser for a 1.55 um wavelength with two mirror surfaces without an anti-reflective coating, an analysis program was developed to determine the beam distribution of the oscillation mode in the longitudinal direction. As the phases of the index and gain gratings on the mirror faces are varied, the lasing gain and the beam profiles |R(z)| and |S(z)| of the lasing mode with the emitted power ratio P_l/P_r are analyzed and examined in case of δL<0. In order to reduce the threshold current of a oscillation mode and enhance the frequency stability, κL should be greater than 8, regardless of the grating phase values at the mirror surface.

• Journal of Software Assessment and Valuation
• /
• v.15 no.1
• /
• pp.71-78
• /
• 2019

Lasers for optical broadband communication systems should have excellent frequency selectivity and modal stability. DFB lasers have low lasing frequency shift during high speed current modulation. In this paper, we have developed a simulation software and analysed beam profiles of a lasing mode in longitudinal direction of an 1.55um DFB laser with two mirrors and without anti-reflection coatings, that have both an index- and gain-gratings. As the phases of the index and gain gratings on the mirror faces are varied, the beam profiles |R(z)| and |S(z)| of the lasing mode with the emitted power ratio P_l/p_r are analysed and examined. In order to reduce the threshold current of a lasing mode and enhance the frequency stability, κL should be greater than 8, regardless of the grating phases on the mirror faces.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.260-261
• /
• 2003

위상 부호 다중화 시스템에서 cross talk 잡음은 기준빔 성분들간의 180$^{\circ}$와 다른 위상 천이 오차, 기준빔 성분들의 Bragg 격자로부터 불균일한 회절 세기들, 혹은 non-Bragg-matched 격자로부터 회절 때문에 발생하는 것으로 알려져 있다. 본 논문에서는 cross talk의 다른 원인들이 최소화된 시스템에서 위상 천이 오차만이 존재할 때 이전 연구들과 달리 유한한 contrast ratio를 갖는 이진 랜덤 이차원 이미지들을 광굴절 결정체에 위상 부호 다중화하고 복원할 때 얻어지는 신호대 잡음비(SNR)을 계산하고 이를 실험 측정 결과와 비교한다. (중략)

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.12
• /
• pp.70-77
• /
• 1999

A new method for fabricating long fiber Bragg gratings(FBGs) using uniform phase mask is proposed. The proposed method is characterized by forming a number of subgratings sequentially in series and varying linearly the effective refractive index of each subgrating. The reflectivity of a 200mm long uniform FBG developed fabricated by the method is about 95%. Also, the bandwidth and dispersion slope of a 250mm long linear-chirped FBG developed here are ∼0.5nm and ∼4.965ps/nm respectively.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.148-149
• /
• 2003

렌즈와 거울의 형상을 정밀하게 측정하고 평가하는 광학시험에 많은 형태의 광간섭계가 개발되고 사용되어왔다. 그 중, 회절격자를 광선분할기로 사용하는 광간섭계들을 통칭하여 회절격자 간섭계라 부른다. 회절격자 간섭계는 별개의 광학표면을 사용하지 않고 회절격자에서 회절된 파면을 직접 기준파면으로 사용할 수 있으므로, 격자의 형태, 주기를 선정하여 기준파면과 측정파면을 원하는 방향으로 재생하여 다양한 형태의 간섭계를 만들 수 있다.(중략)

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.3
• /
• pp.463-468
• /
• 2021

In this paper, when a refractive index grating and a gain grating were simultaneously present in a DFB laser having a wavelength of 1.55 ㎛, a dielectric film coating was applied so that reflection did not occur on the right mirror surface, so that 𝜌_r=0. In case of 𝛿L>0, the characteristics of the oscillation frequency and oscillation gain were analyzed. When the grating phase of the left mirror surface continues to decrease from 𝜋, the graph lines of each mode gradually shift to the left. In case of 𝜅L=10, the threshold gain of the oscillation mode is the lowest. In this case, the mode selectivity is relatively low. From 𝜅L=0.5 to 𝜅L=6, the mode selectivity and the frequency stability are excellent. In the case of DFB lasers with an anti-reflection coated mirror, the threshold gain of the oscillation mode increases but the mode selectivity is about twice as excellent, compared with DFB lasers of having two cleaved facets.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.54-55
• /
• 2002

장주기 광섬유격자는 센서 시스템의 센싱 부분과 광통신 시스템에서의 여러 가지 필터 등 다양한 응용분야에서 연구되어져 왔다. 이러한 장주기 격자는 광섬유의 코어에 균일한 굴절률 변화를 인가했을때 다음과 같은 위상정합조건(phase matching condition)을 만족하는 투과 스펙트럼을 보인다. (중략)

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.10
• /
• pp.48-56
• /
• 2002

A fabrication method of long--period fiber gratings (LPFGs) that can be easily controlled resonance wavelength and losses is introduced. We used the superposition method that core and cladding diameter are modulated by applying a number of small electric-arc to the normal fiber. We derived an equation of resonance wavelength change according to core diameter variation using the phase matching condition and showed the results are well matched with experiments. The measured resonant wavelengths of arc-induced superposition LPFGs according to grating period are well coincident with that of phase matching condition. The resonance wavelength is measured for the temperature changes and a slight mechanical strength degradation of arc-induced LPFGs is observed by increasing arc times.

• Korean Journal of Optics and Photonics
• /
• v.34 no.6
• /
• pp.261-268
• /
• 2023

We propose a compact differential interference contrast microscopic module, which enables snapshot measurements for quantitative phase imaging. The proposed module adopts the lateral shearing interferometric principle, which can obtain self-interference without a reference. Due to the absence of the reference, the system is more stable than the typical interferometric systems. It uses a polarization grating to generate two laterally shifted wavefronts based on its birefringence and polarizing beam-splitting characteristics. Furthermore, the use of a polarization camera does not require sequential measurements for the phase extraction. In the experiments, we observe and measure the timely varying changes of various specimens to verify the system performance with the bright field images and phase contrast images. Because the proposed microscopic module also has the merit of being adaptable to typical microscopy instead of using an imaging camera, it can conveniently replace conventional contrast microscopy.