• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.93-93
• /
• 2022

최근 이상기후로 인하여 우리나라 산림에 태풍 및 국지성 호우가 빈번히 발생하고 있다. 이로 인해 사면재해가 많이 발생하고 있으며 그 중 호우로 인한 많은 양의 물과 함께 토석 및 부유물이 중력에 의해 경사면을 따라 흐름 형태를 보이는 토석류 재해는 속도가 매우 빠르고 파괴적이며 그 결과는 비참하기까지 하다. 더구나 인구밀도가 낮은 산지 계곡부 뿐만 아니라 도시지역에서도 토석류 재해가 빈번히 발생하며 국내 및 해외에서도 토석류에 의한 피해사례는 자주 볼 수 있다. 이러한 토석류 재해의 피해를 줄이고자 토석류의 유동성을 저감시키기 위한 대책구조물의 시공이 많이 이루어지고 있으며 최근에는 투과형 구조물 중 하나인 원통형 기둥구조물을 그룹 형태로의 시공하는 경우가 늘어나고 있다. 토석류와 대책구조물 간의 상호작용은 월류(overflow), 쳐오름(run-up), 역류(backwater) 등의 복잡한 흐름 거동을 보인다. 하지만 원통형 대책구조물에 대한연구가 많이 이루어져 있지 않고 대규모 실험 또한 비용이 많이 소요되고 실행하기도 어렵다. 이 연구는 오픈소스 소프트웨어인 OpenFOAM을 사용하여 원통형 대책구조물의 설치 조건에 따라 토석류 흐름에 미치는 영향을 분석하였다. 짧은 시간 내에 흐름이 발생하고 비뉴튼 유체 특성을 갖는 토석류의 유효전단응력이 난류전단응력에 비해 상당히 크므로 난류의 영향은 무시하였다. 계산된 수치모의의 결과를 같은 규모로 시행한 실험결과와 비교분석 및 검증하였다. 공학학적 문제에 적용 가능하도록 비교적 낮은 해상도의 계산 격자를 사용했지만 실험에서 보여지는 토석류의 흐름거동을 양호하게 재현했으며 원통형 대책구조물의 배치조건에 따라 토석류 선단부 유속의 감소 정도 및 시간에 따른 흐름깊이 변화를 분석할 수 있었다. 이 연구는 다양한 조건을 가지는 토석류 흐름을 해석하는데 유용하게 활용할 수 있으며, 추후 복잡한 실제지형 조건을 고려하는 연구를 통하여 적용성을 확보하고자 한다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.5
• /
• pp.452-460
• /
• 2008

Anti-foaming agents and foam fences have been used to remove the foam at the outfall of power plants, but there are some problems as consumption of maintenance costs and insufficiency of effect. Therefore, development of the methods how to remove the foam by stable coastal structure has been required. In this study, numerical simulation of air entrainment was carried out to design the submerged outlet structure for reducing foam using curtain walls. The air entrainment rate and the discharge of entrained air change according to the shape of weir and curtain wall. Hence, it is necessary to design the optimum section through comparison of each case. The optimum section which has the maximum rate of foam reduction was determined by the simulation results. In addition, it was found that the flow velocity at the submerged outlet is to be smaller than 1 m/s and the submerged depth of curtain wall is to be taller than height of the submerged outlet section.

• Journal of Korean Society of Forest Science
• /
• v.77 no.3
• /
• pp.269-275
• /
• 1988

To investigate the cause of overflow in the torrential stream, the estimated peak flow of run-off and the maximum tarring capacity of the stream were measured at the upstream of Samsung-cheon located in Kwanak Aboretum during July, 1987. The results obtained from this study could be summarized as follows : 1. The surveyed catchment area was 477ha, which was 116 of the designed area (410ha) by the plan. 2. The maximum rainfall intensity measured was 99.5mm/hr and was almost same as the designed intensity(100mm/hr). 3. The surveyed run-off coefficient was 0.672 that was about twice as much as designed one(0.35). 4. The surveyed peak flow of run-off was $88.59m^3/sec$, 222% as large the designed one($39.9m^3/sec$). 5. The designed cross-sectional area of the stream was $17.25m^2$, which was 68% of the designed one$25.43m^2$. 6. The surveyed hydraulic mean radius was 0.94m, which was shorter than the designed one(1.28m). 7. The surveyed mean stream-bed gradient(0.998%) was almost the same as the designed one(1.00%). 8 The surveyed maximum velocity of flow passing through the stream was 2.87m/sec, 78.0 of the designed one(3.68m/sec). 9 The surveyed run-off capacity of the stream was $49.51m^3/sec$, 53% of the designed one ($93.5m^3/sec$).

• Journal of Korean Society of Disaster and Security
• /
• v.14 no.2
• /
• pp.61-75
• /
• 2021

Recently, as the occurrence frequency of sudden floods due to climate change increased and the aging of the existing spillway, it is necessary to establish a plan to utilize an auxiliary spillway to minimize the flood damage of downstream rivers. Most studies have been conducted on the review of flow characteristics according to the operation of auxiliary spillway through the hydraulic experiments and numerical modeling. However, the studies on examination of flood damage in the downstream rivers and the stability of the revetment according to the operation of the auxiliary spillway were relatively insufficient in the literature. In this study, the stability of the revetment on the downstream river according to the outflow conditions of the existing and auxiliary spillway was examined by using 3D numerical model, FLOW-3D. The velocity, water surface elevation and shear stress results of FLOW-3D were compared with the permissible velocity and shear stress of design criteria. It was assumed the sluice gate was fully opened. As a result of numerical simulations of various auxiliary spillway operations during flood season, the single operation of the auxiliary spillway showed the reduction effect of maximum velocity and the water surface elevation compared with the single operation of the existing spillway. The stability of the revetment on downstream was satisfied under the condition of outflow less than 45% of the design flood discharge. However, the potential overtopping damage was confirmed in the case of exceeding the 45% of the design flood discharge. Therefore, the simultaneous operation with the existing spillway was important to ensure the stability on design flood discharge condition. As a result of examining the allocation ratio and the total allowable outflow, the reduction effect of maximum velocity was confirmed on the condition, where the amount of outflow on auxiliary spillway was more than that on existing spillway. It is because the flow of downstream rivers was concentrated in the center due to the outflow of existing spillway. The permissible velocity and shear stress were satisfied under the condition of less than 77% of the design flood discharge with simultaneous operation. It was found that the flood damage of downstream rivers can be minimized by setting the amount allocated to the auxiliary spillway to be larger than the amount allocated to the existing spillway for the total outflow with simultaneous operation condition. However, this study only reviewed the flow characteristics around the revetment according to the outflow of spillway under the full opening of the sluice gate condition. Therefore, the various sluice opening conditions and outflow scenarios will be asked to derive more efficient utilization of the auxiliary spillway in th future.

• Korean Journal of Ecology and Environment
• /
• v.46 no.1
• /
• pp.94-102
• /
• 2013

This study was carried out to determine the variation of the water level and crosssection area for investigating changes of stream foreland, and to determine the correlation between the average flow velocity and cross-section area so as to understand the hydrological characteristics of the stream. The slope of the cross-sectional area was changed in water levels of 0.6~1.0 m and 1.8~2.0 m. The first change occurred in the low-water level season, and the second change occurred in the high-water level seasons. It is assumed that the changes occurred due to the geological transfigure. The correlation between the cross-sectional area and the average flow velocity was 0.22~0.86 in the exponential equation and 0.20~0.87 in the linear equation. The low water level had a higher correlation than the high water level, and free weirs in the upper stream showed a very low correlation. Therefore, this study provides novel information for the management of water quality in the riverside, using correlation equations of the water level and flow velocity with the cross section area.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.18 no.4
• /
• pp.329-337
• /
• 2006

A small hydro-power plant operated by cooling water discharged from the power plant is under construction. In this study, the flow characteristics of the effluent channel and the outfall coastal zone in which the facilities are constructed have been measured and analysed. The flow pattern is highly dependent on the effluent discharge and clearly classified as these typical areas; the upstream and downstream areas of the weir, and the outfall coastal zone. The discharge and the width of the channel in the upstream area of the weir are increased step by step, so the water level fluctuation is small. The flow overtopping the weir is rapidly changing and has highly vertical fluctuation patterns after hydraulic jump just below the weir. The flow pattern in the outfall zone is directed toward the seaward direction and the velocity is dominated by the tidal level fluctuation. The mean tidal range in this area is about 10% greater than that of the Tongyeong tidal gauging station and the wave effects are negligible because of the sheltering effects of this area.

• Journal of Korea Water Resources Association
• /
• v.36 no.6
• /
• pp.971-984
• /
• 2003

This paper presents the hydraulic analysis of the air entrainment by the weir types. For the weir types, the stepped weir, the labyrinth weir and the gate underflow weir were selected, and the oxygen transfer efficiency was estimated by the site investigation and the hydraulic model tests. The most effective type for the oxygen transfer was stepped weir The more steps the stepped weir had, the higher efficiency it revealed. Oxygen transfer was proportional to the flow velocity, the Froude number, and the flow discharge in order. Hydraulic model tests showed that a nappe flow occurred at small flow rates. The concurrent condition of a nappe flow and a skimming flow occurred as flow rate increases, nappe flow at the upper part and skimming flow at the lower part. In the region of nappe flow, air inception occurred from the step edges due to flow separation, and air entrainment was made through a free-falling nappe, an air pocket, a nappe impact and a subsequent hydraulic jump. In the region of skimming flow, air entrainment occurred by the variation of water surface over the steps, but it was relatively small compared with nappe flow.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.336-336
• /
• 2015

일반적인 다목적댐은 홍수 발생 시 본댐으로 유입되는 부유쓰레기 및 잡목 등을 차단하기 위하여 댐 상류에 차단망을 설치하여 1차적으로 사전 방지하고, 홍수기 이후 선박으로 부유물을 수거하여 재활용, 소각 등으로 처리하는 시스템이다. 그러나 본 연구의 대상인 한탄강댐은 홍수조절용 댐으로서 수위 변화 폭이 매우 크고 정상 조건(비 홍수기)시는 대규모 홍수터가 드러나기 때문에 댐 유지관리 방법이 상이하며 한탄강 본류 구간은 하폭과 수심 등 하도의 불규칙성과 만곡부에서 유수의 흐름이 한쪽으로 쏠리는 편기 현상이 발생하는 등 복잡한 수리현상으로 인하여 부유쓰레기의 분포를 판단하기 어려운 지역이다. 따라서 본 연구에서는 부유쓰레기의 유동을 모의하기 위하여 HEC-HMS 모형과 $Vflo^{TM}$ 모형을 활용하여 본류와 지류의 빈도별 홍수량 분석을 실시하고, EFDC 3차원 동수역학 모형을 적용하여 홍수조절용지 내 부유쓰레기의 유입 경로 및 정체 구역을 분석하여 효과적인 쓰레기 처리 방안을 제시하고자 하였다. 분석 결과, 소규모 빈도 홍수(2년, 5년)의 경우 중 상류 지류의 부유쓰레기는 거의 유동하지 못하고 하도의 만곡의 영향을 받아 부분적으로 높은 밀도로 고착될 것으로 모의되며, 특히 본류와의 합류점 부근에 도달한 부유쓰레기는 유로 폭이 급확대되어 유속이 거의 없는 사수역 구간으로 변함에 따라 본류 배수위 영향으로 불규칙하게 맴돌다가 고착되는 것으로 모의되었다. 중규모 홍수(25년, 50년)의 경우, 상류부의 부유쓰레기의 분포는 소규모 홍수 시와 유사한 패턴을 보였으나 중류부에서 홍수파가 본류 하도를 월류하여 홍수터로 넓게 범람하는 지역에서는 소규모 홍수 시 본류 하도 양안에 분포하던 부유쓰레기가 홍수터 쪽으로 밀려가서 고착되는 경향을 보였다. 대규모 홍수(100년, 200년)의 경우, 댐과 인접한 분석 구간 하류부는 댐 배수위의 영향을 가장 크게 받으며 수심이 깊어 흐름이 가장 정체되는 구간으로 본류와 지류 모두 다량의 부유쓰레기가 분포할 것으로 분석되었다. 분석 구간 중류부는 홍수 규모가 증가함에 따라 넓은 홍수터로 침수범위가 급격하게 증가하며 이에 따라 부유쓰레기가 분포할 수 있는 면적이 크게 증가할 것으로 분석되었다. 또한 분석 구간 상류부는 협곡을 이루고 있어 홍수규모가 증가하더라도 침수범위와 부유쓰레기의 분포면적에 큰 변화가 없을 것으로 분석되었다. 본 연구 결과를 바탕으로 댐의 치수 문제가 발생하지 않도록 효과적으로 수거 처리 할 수 있는 부유쓰레기 적치장 및 차단 시설의 적정 설치 위치를 파악하였다.

• Journal of Korea Water Resources Association
• /
• v.54 no.3
• /
• pp.181-190
• /
• 2021

In this study, a large-scale levee breach experiment from lateral overflow was conducted to verify the effect of the new reinforcement method applied to the levee's surface. The new method could prevent levee failure and minimize damage caused by overflow in rivers. The levee was designed at the height of 2.5 m, a length of 12 m, and a slope of 1:2. A new material mixed with biopolymer powder, water, weathered granite, and loess in an appropriate ratio was sprayed on the levee body's surface at a thickness of about 5 cm, and vegetation recruitment was also monitored. At the Andong River Experiment Center, a flow (4 ㎥/s) was introduced from the upstream of the A3 channel to induce the lateral overflow. The change of lateral overflow was measured using an acoustic doppler current profiler in the upstream and downstream. Additionally, cameras and drones were used to analyze the process of the levee breach. Also, a new method using 3D point cloud for calculating the surface loss rate of the levee over time was suggested to evaluate the performance of the levee reinforcement method. It was compared to existing method based on image analysis and the result was reasonable. The proposed 3D point cloud methodology could be a solution for evaluating the performance of levee reinforcement methods.