• Journal of Biomedical Engineering Research
• /
• v.20 no.1
• /
• pp.107-113
• /
• 1999

The purpose of this study was to develop a miniature imaging gamma probe with high performance that can detect small or residual tumors after surgery. Gamma probe detector system consists of NaI(Tl) scintillator, position sensitive photomultiplier tube (PSPMT), and collimator. PSPMT was optically coupled with 6.5 mm thick, 7.62 cm diameter of NaI(Tl) crystal and supplied with -1000V for high voltage. Parallel hexagonal hole collimator was manufactured for characteristics of 40-mm hole length, 1.3-mm hole diameter, and 0.22 mm septal thickness. Electronics consist of position and trigger signal readout systems. Position signals were obtained with summing, subtracting, and dividing circuit using preamplifer and amplifier. Trigger signals were obtained using summing amplifier, constant fraction discriminator, and gate and delay generator module with preamplifer. Data acquisition and processing were performed by Gamma-PF interface board inserted into pentium PC and PIP software. For imaging studies, flood and slit mask images were acquired using a point source. Two hole phantom images were also acquired with collimator. Intrinsic and system spatial resolutions were measured as 3.97 mm and 5.97 mm, respectively. In conclusion, Miniature gamma probe images based on the PSPMT showed good image quality, we conclude that the miniature imaging gamma probe was successfully developed and good image data were obtained. However, further studies will be required to optimize imaging characteristics.

• Journal of Intelligence and Information Systems
• /
• v.13 no.1
• /
• pp.1-14
• /
• 2007

Character images for the background screen of cell phones are one of the fast growing sectors of the mobile content market. However, character image buyers currently experience tremendous difficulties in searching for desired images due to the awkward image search process. Content-based image retrieval (CBIR) widely used for image retrieval could be a good candidate as a solution to this problem, but it needs to overcome the limitation of the mobile Internet environment where an initial query set (IQS) cannot be easily provided as in the PC-based environment. We propose a new approach, IQS-AutoGen, which automatically generates an initial query set for CBIR on the mobile Internet. The approach applies the collaborative filtering (CF), a well-known recommendation technique, to the CBIR process by using users' preference information collected during the relevance feedback process of CBIR. The results of the experiment using a PC-based prototype system show that the proposed approach successfully satisfies the initial query requirement of CBIR in the mobile Internet environment, thereby outperforming the current image search process on the mobile Internet.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.1
• /
• pp.15-31
• /
• 2013

This paper proposes an intermediate image generation method for the viewer's view point by tracking the viewer's face, which is converted to a digital hologram. Its purpose is to increase the viewing angle of a digital hologram, which is gathering higher and higher interest these days. The method assumes that the image information for the leftmost and the rightmost view points within the viewing angle to be controlled are given. It uses a stereo-matching method between the leftmost and the rightmost depth images to obtain the pseudo-disparity increment per depth value. With this increment, the positional informations from both the leftmost view point and the rightmost view point are generated, which are blended to get the information at the wanted intermediate viewpoint. The occurrable dis-occlusion region in this case is defined and a inpainting method is proposed. The results from implementing and experimenting this method showed that the average image qualities of the generated depth and RGB image were 33.83[dB] and 29.5[dB], respectively, and the average execution time was 250[ms] per frame. Also, we propose a prototype system to service digital hologram interactively to the viewer by using the proposed intermediate view generation method. It includes the operations of data acquisition for the leftmost and the rightmost viewpoints, camera calibration and image rectification, intermediate view image generation, computer-generated hologram (CGH) generation, and reconstruction of the hologram image. This system is implemented in the LabView(R) environments, in which CGH generation and hologram image reconstruction are implemented with GPGPUs, while others are implemented in software. The implemented system showed the execution speed to process about 5 frames per second.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.5
• /
• pp.583-589
• /
• 2002

The Internet is absolutely contributed to information telecommunication revolution nowadays. Realizing local network at the various type of buildings such as a company and a university, ethernet is used for subnet and FDDI, ATM are used for backbone mainly in order to get internet services. Processing TCP/IP protocol suite and analyzing the protocol exactly is essential to detecting the problem occurring in the network and developing communication equipment. This paper presents implementation of ethernet LAN protocol analyser which monitors and simulates ICP/IP protocol suite carrying the Internet and non-Internet protocol such as Netware and NetBIOS. MS window98 and visual C are used for development environment and application program operates on the NDIS firmware. The performance analysis on the proposed system is carried out as monitoring and simulating the traffic over LAN of a university. In the result of monitoring the system, the processing time of a packet captured over the LAN is about 1.5ms. In case of simulating the system, the processing time to be taken carrying out TCP connection and disconnection once is packet is about 8.6ms. The performance analysis of monitoring and simulation results satisfies with 10 Mbps ethernet LAN environment.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2005.11a
• /
• pp.500-506
• /
• 2005

본 논문에서는 자가 생성 지도 학습 알고리즘을 이용한 운송 컨테이너 식별자 인식 시스템을 제안한다. 일반적으로 운송 컨테이너의 식별자들은 글자의 색이 검정색 또는 흰색으로 이루어져 있는 특정이 있다. 이러한 특성을 고려하여 원 컨테이너 영상에 대해 검은색과 흰색을 제외하고는 모든 부분을 잡음으로 처리하기 위해 퍼지 추론 방법을 이용하여 식별자 영역과 바탕영역을 구별한다. 식별자 영역으로 구분 된 영역은 그대로 두고, 바탕 영역으로 구분된 영역 은 전체 영상의 평균 픽셀 값으로 대체시킨다. 그리고 Sobel 마스크를 이용하여 에지를 검출하고, 추출된 에지를 이용하여 수직 블록과 수평 블록을 검출 하여 컨테이너의 식별자 영역을 추출하고 이진화한다. 이진화 된 식별자 영역에 대해 검정색의 빈도수를 이용하여 흰바탕과 민바탕을 구분하고 4 방향 윤곽선 추적 알고리즘을 적용하여 개별 식별자를 추출 한다. 개별 식별자 인식을 위해 자가 생성 지도 학습 알고리즘을 제안하여 개별 식별자 인식에 적용한다. 제안된 자가 생성 지도 학습 알고리즘은 입력층과 은닉층 사이의 구조를 ART-l을 개선하여 적용하고 은닉층과 출력층 사이에는 일반화된 델타 학습 방법과 Delta-bar-Delta 알고리즘을 적용하여 학습 및 인식 성능을 개선한다. 실제 80 개의 컨테이너 영상을 대상으로 실험한 결과, 제안된 식별자 추출 방법이 이전의 개별 추출 방법보다 추출률이 개선되었고 FCM 기반 자가 생성 지도 학습 알고리즘보다 제안된 자가 생성 지도 학습 알고리즘이 컨테이너 식별자의 학습 및 인식에 있어서 개선된 것을 확인하였다.색 문제를 해결하고자 하는 것이 연구의 목적이다. 정보추출은 사용자의 관심사에 적합한 문서들로부터 어떤 구체적인 사실이나 관계를 정확히 추출하는 작업을 가리킨다.앞으로 e-메일, 매신저, 전자결재, 지식관리시스템, 인터넷 방송 시스템의 기반 구조 역할을 할 수 있다. 현재 오픈웨어에 적용하기 위한 P2P 기반의 지능형 BPM(Business Process Management)에 관한 연구와 X인터넷 기술을 이용한 RIA (Rich Internet Application) 기반 웹인터페이스 연구를 진행하고 있다.태도와 유아의 창의성간에는 상관이 없는 것으로 나타났고, 일반 유아의 아버지 양육태도와 유아의 창의성간의 상관에서는 아버지 양육태도의 성취-비성취 요인에서와 창의성제목의 추상성요인에서 상관이 있는 것으로 나타났다. 따라서 창의성이 높은 아동의 아버지의 양육태도는 일반 유아의 아버지와 보다 더 애정적이며 자율성이 높지만 창의성이 높은 아동의 집단내에서 창의성에 특별한 영향을 더 미치는 아버지의 양육방식은 발견되지 않았다. 반면 일반 유아의 경우 아버지의 성취지향성이 낮을 때 자녀의 창의성을 향상시킬 수 있는 것으로 나타났다. 이상에서 자녀의 창의성을 향상시키는 중요한 양육차원은 애정성이나 비성취지향성으로 나타나고 있어 정서적인 측면의 지원인 것으로 밝혀졌다.징에서 나타나는 AD-SR맥락의 반성적 탐구가 자주 나타났다. 반성적 탐구 척도 두 그룹을 비교 했을 때 CON 상호작용의 특징이 낮게 나타나는 N그룹이 양적으로 그리고 내용적으로 더 의미 있는 반성적 탐구를 했다용을 지원하는 홈페이지를 만들어 자료

• Journal of Information Management
• /
• v.8 no.5
• /
• pp.130-140
• /
• 1975

이용자(利用者) 중심(中心)의 대화방식(對話方式) 시스팀을 개발(開發)하고 시험(試驗)하였다. 2년(年)동안 280개의 프로파일로 CA - Condensates 데이터 베이스내에서 정보(情報)를 검색(檢索)해 보았다. 그 시스팀의 작업능률(作業能率)을 사용(使用)한 데이터 베이스와 하드웨어의 구조(構造), 소프트웨어 패키지, 이용자(利用者)의 수(數), 그리고 정보(情報)센터에서 제공(提供)한 보조(補助)에 따라 평가(評價)하였다. 대화식(對話式) 검색방법(檢索方法)이나 이용자(利用者)의 요구(要求)를 양화(量化)하는 것, 그리고 여러가지 분야별(分野別)로 검색(檢索)하는 방법(方法) 등 이용자(利用者)의 요구(要求)를 보다 충실(充實)하게 만족(滿足)시킬 수 있는 여러가지 방법(方法)들을 논의(論議)하였다. 모든 정보(情報)시스팀의 목적(目的)은 적시(適時)에 올바른 정(情)보를 적자(適者)에게 제공(提供)하는 것이라고 잘 알려져 있다. 다시 말해서, 정보(情報)시스팀의 주요목적(主要目的)은 이용자(利用者)의 요구(要求)를 충족(充足)시켜 주는 것이다. 이러한 관념(觀念)의 변화(變化)는 정보처리(情報處理)에 큰 변화(變化)를 가져와 정보(情報)시스팀의 적응성(適應性)을 증가(增加)시키기 위해 여러 가지 새로운 방법(方法)들이 개발(開發)되었다. 정보(情報)시스팀들 사이의 상호작용(相互作用), 사람과 컴퓨터와의 대화(對話), 그리고 컴퓨터의 조력(助力)으로 이용자(利用者)의 프로파일을 작성(作成)하는 것 등은 이용자(利用者)의 요구(要求)를 존중(尊重)하고, 필요(必要)한 정보(情報)를 쉽게 찾기 위해서 고안(考案)된 것이다. 한편, 우리들은 이용자(利用者)의 특성(特性)이나 배경(背景), 그리고 문헌(文獻)에 대한 그의 습성(習性) 등에 대해서 얼마나 모르고 있는가를 깨닫게 된다. 상기(上記)의 내용(內容)을 요약(要略)하면, 근대정보(近代情報) 시스팀은 다음의 필요조건(必要條件)을 만족(滿足)해야 한다. 1) 이용자(利用者)의 요구(要求)에 호응(呼應)하기 위해서 적합(適合)한 일련(一連)의 정보(情報)를 제공(提供)해야 한다. 2) 이용자(利用者)와의 관계(關系)에서 시스팀은 적극적(積極的)이어야 한다. 즉, 프로파일 검색공식(檢索公式)에서 유발(誘發)되는 잘못을 지시(指示)하고 지적(指適)할 수 있어 야 한다. 나아가서 컴퓨터의 조력(助力)으로 프로파일을 작성(作成)하고 쉽게 수정(修正)할 수 있는 바람직하다. 우리들은 상기(上記)한 필수조건(必須條件)에 일치(一致)하도록 노력(努力) 하고 Bratislava에 위치(位置)하고 있는 슬로박 과학원(科學院)의 무기화학연구소(無機化學硏究所)와 화학공업경제연구소(化學工業經濟硏究所)가 공동(共同)으로 개발(開發)한 시스팀이 상기(上記)의 특수성(特殊性) 최소(最少)한 몇가지 도입(導入)하였다. 시스팀은 CACS라는 작업명하(作業名下)에서 운영(運營)되었다. 대략 15개월동안 280여개의 프로파일로 CA- Condensates 데이터베이스에서 정보(情報)를 검색(檢索)하여 이용자(利用者)들에게 최신정보(最新情報) 주지사업(周知事業)을 해 보았다. 우리들은 시스팀의 작업능률(作業能率)을 평가(評價)하고 이용자(利用者)의 요구(要求)를 만족(滿足)시키는 최선(最善)의 방법(方法)을 모색(摸索)하였다. 우선 이용자(利用者)와 시스팀사이를 밀접(密接)하게 연결(連結)하는데 중점(重點)을 두었다. 작업능률(作業能率Z)을 분석(分折)해 보고 우리들은 효율(效率)에 영향(影響)을 주는 인자(因子)는 다음의 4가지 주요분류(主要分類)에 속한다는 결론(結論)을 얻었다. (1) 검색(檢索)하는 데이터 베이스 (2) 情報시스팀, 소프트웨어 패키지 그리고 하드웨어 구조(構造) (3) 이용자(利用者)의 특성(特性)과 그의 요구(要求) (4) 정보(情報)센터가 이용자(利用者)에게 제공(提供)하는 보조(補助)

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.8-14
• /
• 2019

Bird-strike is one of the most important design factors for safety in the aviation industry. Bird-strikes have been the cause of significant damage to aircraft and rotorcraft structures and the loss of life. This study used DYTRAN software to simulate the transient response of an Euler-Lagrangian composite helicopter blade that has been impacted by a bird. The Arbitrary Lagrangian Eulerian (ALE) method and a suitable equation of state were applied to model the bird. ALE was applied to the bird-strike analysis due to the large difference between the properties of the blade and bird. The debris of the bird was assumed to be a fluid and applied as Euler elements after the collision. Through the analysis of bird impacts, the leading-edge of the rotor blade (50.8 mm) was used to identify a positive margin of 1.18 based on the TSAI-FILL criteria. The results are assessed to be sufficiently reliable and may be evaluated to replace tests with various analysis conditions. The structural stability of the rotor blade could be assessed by applying various load conditions and different modeling methods in the future.

• Journal of Korean Society of Archives and Records Management
• /
• v.19 no.2
• /
• pp.193-211
• /
• 2019

With the increasing number of business email, there is a growing need to manage email records. Before the development of email records management measures, this study aimed to investigate the status of email records management in universities and determine employees' perceptions of email records management. Surveys and interviews were conducted with professors, staff, and assistants who use groupware accounts at D University, and their overall perceptions of email records management and the status of email record management, such as email production, deletion, archival, and backup of university members were gathered. A total of 185 people responded to the survey, and 12 of them were interviewed. According to the analysis, the public utilization of email was frequent, and the management of emails, such as backup and retention, was not performed well compared to deletion and storage. In addition, email is still perceived as private, and users recognize the need for email records management, but they still perceive that they are responsible for records management. The results of this study will be useful in setting the policy for email records management of universities and will help provide email record management awareness.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.27 no.2
• /
• pp.82-96
• /
• 2018

3D printing is a process of producing 3d object from a digital file in STL format by joining, bonding, sintering or polymerizing small volume elements by layer. The various type of 3d printing is classified according to the additive manufacturing strategies. Among the types of 3D printer, SLA(StereoLithography Apparatus) and DLP(Digital Light Processing) 3D printer which use polymerization by light source are widely used in dental office. In the previous study, a full-arch scale 3d printed model is less precise than a conventional stone model. However, in scale of quadrant arch, a 3d printed model is significantly precise than a five-axis milled model. Using $3^{rd}$ Party dental CAD program, full denture, provisional crowns and diagnostic wax-up model are fabricated by 3d printer in dental office. In Orthodontics, based on virtual setup model, indirect bracket bonding tray can be generated by 3d printer. And thermoforming clear aligner can be fabricated on the 3d printed model. 3D printed individual drilling guide enable the clinician to place the dental implant on the proper position. The development of layer additive technology enhance the quality of 3d printing object and shorten the operating time of 3D printing. In the near future, traditional dental laboratory process such as casting, denture curing will be replaced by digital 3D printing.

• Korea Science and Art Forum
• /
• v.37 no.3
• /
• pp.135-145
• /
• 2019

IFC(Industry Foundation Classes) is used for information exchange in BIM-based collaboration process, and it does not secure reliability of information exchange results between fields due to structural limitations. In the end, it is a realistic problem that we have to use specialized BIM software by field, and we can not secure smooth interoperability in the process of information exchange and change. This study was conducted to find ways to secure the interoperability of BIM work between architecture and structure fields by utilizing Open Source provided by software developers to solve these problems. First, through expert survey and in-depth interview, information and improvement factors required in the process of collaboration between architecture and structure were derived. Second, in order to find a solution to the improvement factors, existing studies related to Open-API and domestic and overseas APIs were investigated and analyzed. Third, Ad-On was developed to secure interoperability by using Open API, mainly BIM S/W, which is mainly used in each field. As a result of the study, the possibility of securing interoperability through the management of the design change history between fields was confirmed by using API. It is judged that the application range of API will be expanded to the construction and maintenance field in the future. Therefore, in order to increase the usability for application diffusion, further research on interface improvement through user-centered verification is needed.