• Journal of Energy Engineering
• /
• v.8 no.1
• /
• pp.7-13
• /
• 1999

원형 용융탄산염 단위 연료전지의 성능 및 온도분포가 수치모사를 통해 얻어졌다. 원형 단위전지내에서는 사각형 단위전지에 비해 비교적 균일한 온도분포가 얻어졌다. 전지의 바깥쪽으로 갈수록 가스전환율이 커졌고 전류밀도도 크게 증가하였다. 운전전압이 감소할수록 각 가스들의 전환율은 커지고 전류밀도도 커졌다. 원형 전지에서의 평균전류밀도나 출력은 전압이 높을 때는 사각형 전지보다 작았고, 전압이 낮을 때는 더 컸다. 음극 및 양극 가스의 전환율도 마찬가지였다. 전압이 낮을 때 가스의 전환율이 커서 원형 전지의 효용성이 크게 나타났다.

• Korean Journal of Microbiology
• /
• v.25 no.4
• /
• pp.274-281
• /
• 1987

The effects of bovine serum albumin, myoinositol and ergosterol on protoplast formation, regeneration and fusion from auxotrophic mutants of Candida pseudotropicalis were examined. Frequency of protoplast formation ranged from 48 to 98% depending on auxotrophic types. When myoinositol (0.5mg/ml) and ergosterol (0.1mg/ml) were supplemented in the medium of cell growth, and bovine serum albumin (4mg/ml)was added to protoplasting buffer, 50-100% of cells were converted to protoplasts. Such a treatment of three additives improved 2.2-3.0 fold of regeneration rate of protoplasts. The fusion frequencies between complementary auxotrophs ranged from $7.0\times 10^{-4}$ to $1.5\times 10^{-3}$ in the optimal conditions. These values showed 1.9-2.3 fold increase when compared with fusion frequencies obtained without the treatment of additives. These results suggested that these comsion frequencies obtained without the treatment of additives. These results suggested that these xompounds may improve protoplast regeneration and fusion between complementary auxotrophs used in this study.

• Korean Journal of Microbiology
• /
• v.30 no.3
• /
• pp.154-159
• /
• 1992

Forniation ancl ~regcncration oi' conitlial pro1oplast of Pc, ti~i.rlli~in~~~ c~rr~~culo.hryupmel.- - czllulolytic Ihngus. were examined. By using Novozyme 134(1'!/0 w/c) as a cell wall lytic enzyme. the highest yield of protopl;~sts exceeding 501%, war obtained from the qwollen conidiosporcs preincubatrd in the minimal medium containing 2-tleoxy-D-glucose(2-UC;. 75 pglml) for 10-11 11. No protoplast were obtained horn dormant spores. The regeneration frequency of the protoplasts was 49.2'!11. which was higher than that of mycclium originated protoplast (4.6-17.X1X, . in 0.6 M MgS04. pH 5.6). 'l'lie best osmotic stahilizcr ror the isoaltion and regcueration of thc protoplast was 0.6 M iimmonium sulfatc and 0.6 M magnesiuni sulfhte. respectively. 'I'lie process of the protoplast isolaiton l'ro~n swollen cnnirliospore ancl regeneration ha\, ing two pattcrns from protoplast were obsen'etl through light microscope.

• Journal of Plant Biology
• /
• v.34 no.1
• /
• pp.19-23
• /
• 1991

Culture of embryogenic callus and suspension were induced from rice seeds in MS2.5 medium. In hormone free N6 medium, whole plantlets were regenerated from embryogenic callus. We observed cell division and reformation of embryogenic callus on culture of protoplast isolated from embryogenic cell suspensions. In addition, we studied the influencing factors on viability of protoplast treated with electroporation. Viability was decreased according to the increase of voltage and capacitance during electroporation. An optimal level of viability was obtained after treatment with $200-300\;V/1180\;\mu\textrm{F}$ in HEM buffer at $4^{\circ}C$..

• KSBB Journal
• /
• v.6 no.2
• /
• pp.201-205
• /
• 1991

We have investigated influencing factors on viability of Bletilla striata protoplasts electroporated in the presence of various electrical conditions. Cultures of embryogenic callus and embryogenic cell suspension were established with immature seeds of Bletilla striata. Viabilty of electroporated protoplasts was decreased according to the increaseing of electroporation voltage and capacitance. An optimal condition of electroporation for viable protoplasts was in HBM buffer at $4^{\circ}C$.

• Korean Journal of Animal Reproduction
• /
• v.22 no.4
• /
• pp.395-403
• /
• 1998

In this study we determined fertilization processes and developmental ability of porcine oocytes following injection of round spermatid in the presence and absence of artificial activation. Electrical stimulation at 2 h before spermatid injection significantly increased the incidence of normal fertilization as compared to those following injection without stimulation or with stimulation immediately after injection. The incidences of two pronuclear formation and apposition were not different in oocytes between following intracytoplasmic spermatid and spermatid nucleus injection. Indirect immunocyto chemistry and laser scanning confocal microscopy study revealed that microtubuels were organized from the oocyte cortex following round spermatid injection, and this seemed to move both male and female pronuclei into the oocyte center. At 6 days following injection blastocoele formation was seen in the eggs following round spermatid (25%) and round spermatid nucleus injection (27%). However, none of oocytes developed to the blastocyst stage at 6 days following sham injection. The average cell numbers of blastocysts at 8 days following injection of spermatid and spermatid nucleus were 87 to 99. These results suggested that either round spermatid or it's nudeus can be used to produce viable embryos by injection into unfertilized oocytes in the pig.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.68-72
• /
• 1992

자동차 및 각종 판재 성형시 성형율을 향상시키는 방법에는 신소재 개발, 금형기술개발, 접촉부의 마찰을 줄여 주기 위한 윤활 등등이 있겠으나 손쉽게 공구다이 상하에 비드를 설치하여 판재를 성형할 경우 미끄럼 저항의 균형을 이루어 주름 억제와 두께분포가 보다 균일해지며 스프링백 현상 등으로 인한 성형 후 치수 불량 등을 주어 판재성형율을 향상시키는데 기여할 수 있다. 본 연구에서는 펀치가 판재를 성형하기 위해 진행됨에 따라 공구다이와 펀치간의 접촉각도가 변하게 되는 점을 고려하여 인출 각도변화에 따른 인출특성 및 마찰계수 변화등을 알아보고자 하며 원형 형태의 환저비드, 단일원형비드, 이중원형 비드의 종류와 크기변화 및 비드좌우 모서리 변화, 공구다이모서리변화, 블랭크가압력 변화, 비드 전진깊이 변화, 비드통 과 후 재료의 기계적 성질 변화등 인출 특성에 영향을 미치는 인자들을 변화시켜나가며 이에 따르는 인출특성을 Data Bank화 시켜 비드 종류나 형상에 따른 금형설계의 기초자료를 제공하고자 한다.

• Proceedings of the KSAR Conference
• /
• 2001.03a
• /
• pp.17-17
• /
• 2001

착상전 수정란 단계에서 형질전환 수정란의 선발은 형질전환동물의 효율을 증대시킬 수 있는 방법이다. 성공적인 형질전환동물의 생산을 위해서는 생산된 수정란의 mosaicism 빈도를 감소시켜 전체 할구에서의 유전자 발현을 유도하는 것이 최적일 것이다. 따라서 본 연구에서는 돼지의 웅성 생식세포를 이용한 형질전환동물의 생산에 있어서 다양한 정자세포 이용시 형질전환 수정란의 생산성 및 mosaicism 빈도를 조사하였다. 아울러 돼지 웅성생식세포내 GFP 유전자도입시 세포들의 생존율 및 원형정자세포분리 후 배양에 따른 형태적 변화를 관찰하였다. 돼지의 웅성 생식세포내 GFP 유전자 도입은 전기자극법 (1.3 ㎸/cm, 200 $\mu\textrm{s}$) 에 의하여 수행되었으며, 이 때 생존율은 60-70%이였다. 유전자가 도입된 전체 세포중 원형정자세포군의 분리는 유식세포분리기에 의하여 수행하였으며, 전체집단에 대한 분리군의 비율은 평균 16.2%이였다. 형질전환 수정란의 생산은 정자 (ICSI), 원형정자세포 (ROSI), 배양후 확장된 원형정자세포(ELSI)를 이용하였으며 각각의 난할율은 ICSI (82.9%), ROSI (59.1%), ELSI (62.1%)로 유의한 차이를 나타내었다. 그리고 8세포기까지의 배발달율은 각각 61.1, 40.9 및 48.6%이였으며, 상실배 및 포배기형성율은 각각 24.6, 18.1 및 32.4%이였다. 형광현미경하에서 GFP 단백질이 발현된 8세포기 수정란을 대상으로 각각의 할구를 primer extension pream-plification (PEP) PCR 방법으로 분석한 결과, ICSI 및 ROSI 실시후 대부분 (15/20, 9/10) 의 수정란은 3~4개의 할구에서만 GFP 유전자의 존재여부를 확인할 수 있었으며, 전체 할구에서 GFP 유전자가 모두 확인된 수정란은 없었다. 반면에 배양된 확장 원형정자세포를 이용하여 생산한 수정란의 경우, 4/10 (40%)에서 전체 할구내에 GFP 유전자의 존재를 확인할 수 있었다. 이러한 결과는 비록 배발달율 및 GFP 유전자 발현율에 있어서는 ELSI방법이 ICSI 등의 방법보다 현저히 낮았지만, mosaicsism 빈도가 낮아 바람직한 형질전환 수정란 생산에서는 오히려 유용한 방법이라고 사료된다. 또한 외래 유전자의 도입효율 면에서 후기 원형정자나 성숙정자보다 초기 원형정자세포에 외래유전자를 도입한 다음, 성숙시킨 확장원형 정자세포를 이용하는 방법이 보다 우수하다는 것을 시사하였다. 따라서 본 연구결과는 포유동물의 웅성 생식세포를 이용하여 nonmosaicisn을 나타내는 형질전환수정란을 생산하고 선발할 수 있는 일련의 기술적 과정을 정립하였다고 사료된다.

• Korean Journal of Microbiology
• /
• v.24 no.1
• /
• pp.24-31
• /
• 1986

The optimal conditions for the formation and the regeneration of Pseudomonas spheroplast were measured. Pseudomonas spp. cells were transformed to spheroplasts from 99.0% to 99.9% by treatment of $100{\mu}g/ml$ lysozyme and 10mM EDTA at room temperature. The optimal pH for the spheroplast formation was pH 8.0. Magnecium chloride, calcium chloride and streptomycin were effective on the stabilization of Pseudomonas spheroplast, while $Mg^+\;and\;Na^+$ ions were effective on the formation of Pseudonomas spheroplast. Rich Regeneration Medium was used for the regeneration of Pseudonomas spheroplast. To improve regeneration frequency, Bovin Serum Albumine and cationic ions were added to the spheroplast dilution beffer and regeneration environment respectively. Treatment of 20mM calcium chloride in ehr Rich Regeneration Medium could improve the yield of regenerants as much as 28-fold. Treatment of 1% Bovin Serum Albumine in the spgeroplast formation and dilution buffer increased the yield of regenerants to 10-fold. Also, the regeneration frequency was improved to 14-fold shen Rich Regeneration Meidum containing 0.5% Gelatin was used for regeneration as well as 1% Bovin Serum Albumine.

• The Korean Journal of Mycology
• /
• v.13 no.2
• /
• pp.79-82
• /
• 1985

The experiment of protoplast regeneration and reversion were undertaken to provide a basic techniques for protoplast manipulation. Protoplasts of Pleurotus florida and Pleurotus ostreatus were reverted to normal hyphal growth and the reversion frequency of both fungal protoplasts were $0.24{\sim}3.19%$. Reversion medium stabilized with 0.6 M potassium chloride and sucrose was better than the other stabilized one. The protoplast reversion frequency was increased when various amino acid and vitamin compounds were added to the hypertonic mushroom complete agar medium.