• Applied Chemistry for Engineering
• /
• v.25 no.3
• /
• pp.286-291
• /
• 2014

In this study, nanosized TPA-silicalite-1 was synthesized with a suitable molar composition of TPAOH: $SiO_2$: $H_2O$ for the development of zeolite ceramic membranes to utilize as gas separation. As silica sources, TEOS, LUDOX AS-40 and CAB-O-SIL were used with the starting material of TPAOH. $NaH_2PO_4$, and a variety of acids and bases were used as promoters after TPAOH, $SiO_2$, $H_2O$ gel synthesis. To decrease synthesis time, a two step temperature change method was applied to the synthesis of TPA-silicalite-1 at a low temperature. TPA-silicalite-1 synthesized was analyzed with XRD, SEM, BET and TGA. As a result, TPA-silicalite-1 powders with a particle size of 100 nm and a specific surface area of $416m^2/g$ were obtained as optimum synthesis conditions when the two stage temperature change method was used with $NaH_2PO_4$ as promoter.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.3
• /
• pp.605-610
• /
• 2008

Through welding fabrication, user can feel unsatisfaction of surface quality because of welded defects, Generally speaking, these are called weld defects. For checking these defects effectively without time loss effectively, weldability estimation system setup is an urgent thing for detecting whole specimen quality. In this study, by laser vision camera, catching a rawdata on welded specimen profiles, treating vision processing with these data, qualitative defects are estimated from getting these information at first. At the same time, for detecting quantitative defects, whole specimen weldability estimation is pursued by multifeature pattern recognition, which is a kind of fuzzy pattern recognition. For user friendly, by weldability estimation results are shown each profiles, final reports and visual graphics method, user can easily determined weldability. By applying these system to welding fabrication, these technologies are contribution to on-line weldability estimation.

• Journal of the Geological Society of Korea
• /
• v.54 no.6
• /
• pp.605-614
• /
• 2018

For physical experiments like analogue modeling that designed for studying geological deformation, reproducibility of the deformation is important to guarantee the reliability of the experiment. In this study, the normal fault generated by extensional stress is benchmarked using a sand box model. The scaling factors for the modeling test are considered and the experiments are conducted by setting the appropriate material, extensional stress, and boundary condition in the same way as in a benchmark experiment. In addition, a large centrifuge facility is used to vary the centrifugal acceleration and extension rate in the same sized model to account for the scaling factors of the physical quantity during extensional behavior. At 1 g benchmark condition and a centrifugal field at 10 g, a constant rate of the extensional stress is implemented and the topographic evolution is reliably measured. In this study, the reliability and applicability of large centrifuge model tests are evaluated for formulating experiments designed to study geological deformation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.264-264
• /
• 2019

개수로 흐름 해석을 위해 수치모형을 적용할 때 반드시 거쳐야 하는 과정이 격자망을 구성하는 일이다. 불규칙한 형상의 자연수로를 모의할 때 격자망 생성은 쉬운 일이 아니며, 따라서 가시적으로 격자망 생성을 돕고, 격자망의 수정도 용이한 도구가 요구된다. 따라서 본 연구에서는 수심적분된 흐름방정식을 지배방정식으로 하여 개수로 흐름 해석을 용이하게 하고자 그래픽 사용자 인터페이스(GUI)를 개발하였으며, 이를 소개하고자 한다. 격자망은 기본적으로 사각형과 삼각형 요소로 구성될 수 있으며, 유한차분모형 등에서는 정형사각형 격자망을, 유한요소모형에서는 비정형 사각형 및 삼각형 격자망 또는 혼합망을 생성시킬 수 있다. 이산점(scatter points)이나 절점(node points)을 생성하거나 기존의 자료를 불러들여 삼각망 또는 사각망을 형성시킬 수 있으며, 연속선(polylines)을 작성하여 형성된 폐다각형(polygones)을 이용하여 정규 또는 비정규의 삼각망 또는 사각망을 형성시킬 수 있다. 또한 두 점사이를 선형 또는 반원 형태로 편향 정도(biased value)를 설정하여 원하는 개수만큼 나눌 수 있도록 하여, 보다 효율적인 격자형성이 가능토록 하였다. 기존 상용 프로그램에서 작성된 격자를 불러들여 활용 가능하며, 백그라운드 이미지로 지형도나 위성사진을 띄어놓고 이미지 상에서 격자를 형성할 수도 있다. 기본적으로 마우스를 이용하여 화면의 이동, 확대 및 축소와 점, 선, 요소의 생성 및 선택이 가능하다. 본 프로그램은 Qt와 modern OpenGL을 바탕으로 제작되었으며, 마이크로소프트사의 windows 뿐만 아니라 Mac OS, Linux 버전의 설치 파일 작성이 가능하다.

• Ecology and Resilient Infrastructure
• /
• v.8 no.4
• /
• pp.266-272
• /
• 2021

Water friendly space refers to a place designated to plan and manage spaces for residents Water friendly activities. Efficient management of river Water friendly parks requires automated GIS data and DB construction of the water friendly facilities. Object-based classification using drone images or aerial images is attracting attention as an efficient means to acquire 3D spatial information in the country. To remove the miscellaneous image included in the extracted outline, a linear simplification of the outline is required, and it is difficult to apply manually, so various automation methods have been developed to overcome this, and among them, the most widely studied and utilized is the linear simplification method. In this study, the suitability of linear simplification algorithms such as Douglas-Peucker, Visvalingam-Whyatt, and Bend-simplify algorithms for the geometric shape of hydrophilic facilities was determined.

• Journal of Conservation Science
• /
• v.34 no.6
• /
• pp.471-479
• /
• 2018

Seonunsa Temple is a site of Dancheong cultural significance in Daewoongjeon. Three-dimensional (3D) scanning can be used to create a simulation in 1:1 ratio without touching the Dancheong patterns directly. The traditional method of recreating Dancheong was paining with tracing paper using a fix pin. However, manual direct copy processes can cause and damage to the objects. This study shows the results of a simulation of a tranditional Dancheong patterns as an alternative; the simulation was able to reduce dimensional errors and prevent damage by using 3D scanning. As a result, objective and precise proportions of the simulation were acquired. The 3D scanning method may be applied for work such as the replication and restoration of the drawing, 3D fabrication of the original data, and printing of the additional drawing. In addition, with the production of 3D materials, a virtual museum is possible.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.140-140
• /
• 2018

다수의 자연 하천은 사행의 형태를 가지고 있으며 자연 상태에서의 직선 하천 형태는 비율이 20% 이하이다. 이러한 하천의 사행 형상으로 인하여 편수위 발달, 횡방향 압력의 불균형, 그리고 수심차에 의한 원심력이 발생하여 이차류 흐름이 발생된다. 정확한 이차류 구현을 위해서는 3차원 모형을 사용하는 것이 바람직하나, 3차원 모형의 격자 구성과 사용에서는 상당한 시간 및 노력이 요구되기 때문에 수심적분 2차원 모형을 사용하면서도 이차류의 영향을 구현하기 위한 연구들이 이루어졌다. 본 연구에서는 이러한 이차류의 영향을 2차원 모형으로 구현하고자 하였으며 이를 위해 이차류 연직 분포에 대한 기존 연구를 검토하여 새로운 이차류 공식을 개발하였다. 그리고 한국건설기술연구원 하천실험센터의 실규모 실험을 통해서 이차류 공식에 사용되는 계수를 보정하였다. 이처럼 개발된 식은 이차원 수리해석 모형인 HDM-2D에 적용되었다. HDM-2D는 수심 적분된 2차원 운동량 방정식을 지배방정식으로 사용하는 수리해석모형으로서, 이차류의 영향을 반영하기 위하여 개발한 황방향 유속의 연직분포식을 분산 응력항에 대입하여 이차류에 의한 전단 효과를 구현하였다. HDM-2D 흐름 모의 수행 결과와 하천실험센터 실험결과와 비교하여 이차류 효과가 주 흐름 유속의 분포에 미치는 영향을 확인하였다. 분석 결과, 모의 결과는 실험에서 발생하는 유속의 주 흐름 분포가 바깥쪽으로 편중되는 현상을 적절하게 재현함을 알 수 있었다. 모의 결과를 통해 HDM-2D 모형이 이러한 이차류 영향을 구현할 수 있음을 확인하였으며, 사행수로에서 주 흐름분포의 재분배는 하천 환경에서 유사 이동 및 오염물 이동에 큰 영향을 미칠 것으로 판단된다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.5
• /
• pp.267-275
• /
• 2022

Using a nonconforming mesh in enrichment methods results in several numerical issues induced by discontinuities and singularities found within the solution spaces, including the computational overhead during integration. In this study, we present a novel enrichment technique based on the selective expansion technique of moment fitting (Düster and Allix, 2020). In particular, two modifications are proposed to address the inefficiency during the integration process. First, a feedforward artificial neural network is introduced to correlate the implicit functions and integration moments. Through numerical examples, it is shown that the efficiency of the method is greatly improved when compared with existing expansion techniques, whereas the solution accuracy is maintained. Additionally, the finite element and domain representation grids are separated, which in turn improves the solution accuracy even for coarse mesh conditions.

• Progress in Superconductivity and Cryogenics
• /
• v.9 no.1
• /
• pp.5-8
• /
• 2007

We have investigated the superconducting properties and surface morphology of $Sm_xBa_yCu_3O_{6+z}$ thin films deposited on LMO/IBAD-MgO/Hastelloy which prepared with different composition ratio by co-evaporation method(EDDC, Evaporation using Drum in Dual Chambers). We observed the composition ratio of SmBCO thin films by EDS analysis. We fabricated SmBCO thin film with critical current density of $1.5{\times}10^6A/cm^2$ at composition ratio of SM:Ba:Cu=1.10:2.01:3(at 77 K self-field). And, we confirmed that substitution of Sm-Ba did not occur at Cu rich phase by EDS analysis.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.4
• /
• pp.47-58
• /
• 2007

The usage of Integral abutment bridges has been increased worldwide because of reducing bridge maintenance costs and resisting seismic loads. Although these attributes make the integral abutment bridge an increasingly popular choice, back-abutment interaction issues remain unresolved. Hence, the earth pressure behavior of an integral abutment bridge having 90 m long PSC beam bridge for the first time in Korea was analyzed by conducting long term monitoring in this study. Based on this study, the results were as follows; the ratio of maximum passive movement to the abutment height (H) of 0.0027 and the maximum passive earth pressure coefficient of 4.8 were developed at 0.82H from the bottom of the abutment during summer season. During winter season, the ratio of maximum active movement to H of 0.0011 and the maximum active earth pressure coefficient of 0.7 were developed at the same location as in summer season. The new earth pressure distributions having a trapezoid type were proposed based on this study.