• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.7
• /
• pp.930-938
• /
• 2018

Underwater noise radiated from submarines is directly related to the probability of being detected by the sonar of an enemy vessel. Therefore, minimizing the noise of a submarine is essential for improving survival outcomes. For modern submarines, as the speed and size of a submarine increase and noise reduction technology is developed, interest in flow noise around the hull has been increasing. In this study, a noise analysis technique was developed to predict flow noise generated around a submarine shape considering the free surface effect. When a submarine is operated near a free surface, turbulence-induced noise due to the turbulence of the flow and bubble noise from breaking waves arise. First, to analyze the flow around a submarine, VOF-based incompressible two-phase flow analysis was performed to derive flow field data and the shape of the free surface around the submarine. Turbulence-induced noise was analyzed by applying permeable FW-H, which is an acoustic analogy technique. Bubble noise was derived through a noise model for breaking waves based on the turbulent kinetic energy distribution results obtained from the CFD results. The analysis method developed was verified by comparison with experimental results for a submarine model measured in a Large Cavitation Tunnel (LCT).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.203-210
• /
• 2019

A recent earthquake on the Korean Peninsula caused much damage to masonry buildings, and research on performance evaluation has been underway. A masonry building is generally constructed using wet construction and is affected by temperature, which reduces the efficiency of the construction. In this study, we propose a dry construction technique for assembling concrete blocks without using mortar and evaluated its performance through experimental and analytical research. To evaluate the performance, experiments were carried out for the prismatic compressive strength, direct terminal strength, and diagonal tensile strength of the dry construction wall. The adequacy of the cross section shape was also reviewed through FEM analysis. The results show that the compressive strength and diagonal tensile strength could exert a certain intensity or higher. Furthermore, the H-type module of a key block acted as a shear key for the entire concrete block, which resulted in excellent shear strength performance. In addition, the shape and thickness of the main block have a major effect on the strength performance of each block. Therefore, an optimal shape and the proposed dry construction method could be applied to replace the wet method by studying the construction or seismic performance of the proposed method.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.6
• /
• pp.67-76
• /
• 2020

This paper reports an experimental study to evaluate the flexural behavior of concrete beams reinforced using Fe based shape memory alloy (Fe-SMA) bars. For the experiment, a concrete beam of 200mm×300mm×2,200mm was produced, and a 4% pre-strained Fe-SMA bar was used as a tensile reinforcement. As experimental variables, type of tensile reinforcement (SD400, Fe-SMA), reinforcement ratio (0.2, 0.39, 0.59, 0.78), activation of Fe-SMA (activation, non-activation), and joint method of Fe-SMA bar (Continuous, welding, coupler) were considered. The electric resistance heating method was used to activate the Fe-SMA bar, and a current of 5A/㎟ was supplied until the specimen reached 160℃. After the upward displacement of the specimen due to the camber effect was stabilized, a three-point flexural loading experiment was performed using an actuator of 2,000 kN capacity. As a result of the experiment, it was found that the upward displacement occurred due to the camber effect as the Fe-SMA bar was activated. The specimen that activated the Fe-SMA bar had an initial crack at a higher load than the specimen that did not activate it. However, as with general prestressed concrete, the effect of the prestress by Fe-SMA activation on the ultimate state of the beam was insignificant.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.3
• /
• pp.5-13
• /
• 2023

In this study, a comparative study is conducted on the synthesis methods for silica nanoparticle employing the silicon sludge waste generated from the semiconductor manufacturing processes. Specifically, acid-washed silicon sludge wastes with no impurities are employed as the precursors of sol-gel and hydrothermal methods for silica nanoparticles preparation. The morphologies and properties of silica nanoparticles synthesized via two synthetic methods are examined by various analysis methods. As a result, silica nanoparticles from the sol-gel method are fabricated with high purity and uniform shape, while the hydrothermal method exhibits advantages in yield and ease of synthetic process. This comparative study offers detailed experimental results on the two synthetic methods for silica nanoparticle synthesis, which may contribute to the establishment of manufacturing high-value materials using the by-products generated in the semiconductor process.

• Composites Research
• /
• v.18 no.6
• /
• pp.9-18
• /
• 2005

With the wide applications of fiber-reinforced composite material in aero-structures and mechanical parts, the design of composite joints have become a very important research area because the joints are often the weakest areas in composite structures. This paper presents an analytical study of the stress distributions in mechanically single-fastened and multi-fastened composite laminates. The finite element models which treat the pin and hole contact problem using a contact stress analysis are described. A dimensionless stress concentration factor is used to compare the stress distributions in composite laminates quantitatively In the case of single-pin loaded composite laminate, the effects of stacking sequence, the ratio of a hole diameter and the width of a laminate (W/D ratio), the ratio of hole diameter and distance from edge to hole (E/D ratio), friction coefficient and clamping force are considered. In the case of multi-pin loaded composite laminate, the influence of the number of pins, pitch distance, number of rows, row spacing and hole pattern are considered. The results show that P/D ratio and E/D ratio affect more on stress distributions near the hole boundary than the other factors. In the case of multi-pin loaded composite laminate, the stress concentration in the double column case is better than the other cases of multi-pin loaded composite laminate.

• Journal of Korea Water Resources Association
• /
• v.43 no.7
• /
• pp.657-666
• /
• 2010

The adjustment processes of mining pits in the disturbed channels by sand or gravel mining were investigated by laboratory experiments in this study. The pit migrated with speed when the river bed was steep. The pit migrated slow and steady when the pit was filling with sand, but the pit migrated with speed after the filling processes was finished. The submerged angle of repose in the pit was nearly constant during the pit was filling. The pit was filled with sand with speed as the channel slope was increased. It took time for the pit to be filled with sand as the pit dimension was increased. This meant that the disturbed channels by sand or gravel mining to adjust the new environment was dependent on the slope of the channels and the dimension of the pits. The dimensionless pit length was short and the dimensionless pit depth was shallow as the time was increased. The dimensionless pit depth was shallow, but the dimensionless pit migration speed was increased as the dimensionless shear velocity and the migration speed of the pit were increased. The dimensionless pit depth was increased with the dimensionless bar migration speed. The shape of the pit was deformed and migrated downstream in accordance with the location and shape of the biased bar front which was developed upstream.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.331-337
• /
• 2021

Owing to the limited development period and budget of the weapon system, many problems have arisen in the operation stage after mass production. Therefore, engineering changes are also increasing. On the other hand, an analysis of the cause of problems and improvement of the system equipment performed in engineering changes cannot be managed synthetically. Hence, important actual data can only be used once. In particular, unlike hardware where the shape of the equipment is changed or the part number is changed, the contents of software engineering changes are only partially included in the proposal. Moreover, only the extent to which the version of the source package and the executable file has been changed can be identified. Therefore, this paper proposes a method to build and utilize a database for cause analysis and improvement plan data of weapon-system software engineering changes and software technical support. The above utilization measure can contribute to the quality assurance of weapon-system software developed in the future by preemptively applying real-world data when developing similar weapon systems.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.2
• /
• pp.121-127
• /
• 2024

In this study, the applicability of replacing DG(Desulfurized Gypsum) from oil refinery with CCCMs(Carbon dioxide Conversion Capture Materials) as an ALC(Auto-claved LIghtweight Concrete) raw material was examined, and basic properties of ALC was measured. The main chemical components of DG and CCCMs were CaO and SO₃, and an increase in LOI(Loss of ignition) due to mineral carbonation reaction was verified. The crystalline phases of CCCMs were CaCO₃, CaSO₄, Ca(OH)₂, and CaSO₄·2H₂O. When DG, a raw material for ALC production, was replaced with CCCMs, foaming height, pore shape, absolute dry gravity, and compressive strength results measured similar for all binders. In addition, the formation of tobermorite which is main crystalline phase of ALC was shown for all specimens in microstructural analysis.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.404-404
• /
• 2012

저차원계 탄소 동소체는 특유의 구조에서 기인하는 우수한 물리적 성질로 인해 각광받고 있는 물질이다. 탄소원자가 육각형 격자 모양을 지닌 2차원계 물질인 그래핀(graphene)은 뛰어난 전기적, 물리적, 광학적 성질로 인해 전계효과 트랜지스터(field effect transistors), 투명전극(transparent electrodes), 에너지 저장체, 복합체, 화학/바이오 센서 등 다양한 분야에서 활용을 위한 연구가 진행되고 있다. 또한 그래핀이 튜브형태로 말려있는 1차원계 물질인 탄소나노튜브(carbon nanotube)의 전기적, 열적, 기계적 성질은 이를 전계방출 디스플레이(field emission display), 전도성 플라스틱, 가스 저장체, 슈퍼 커패시터 등에 적용가능하게 한다. 최근 2차원계 물질인 그래핀과 1차원계 물질인 탄소나노튜브의 장점을 극대화하기 위한 복합 나노 구조에 대한 다양한 연구가 진행되고 있는 추세이다[1-5]. 본 연구에서 그래핀-탄소나노튜브 혼성 구조의 제작은 다음과 같이 진행되었다. 우선 열 화학기상증착법(thermal chemical vapor deposition)을 이용하여 그래핀을 합성하였다. 합성된 그래핀은 메타크릴산메탈 수지(polymetylmethacrylate; PMMA)를 이용한 전사(transfer)방법을 이용하여 원하는 기판에 위치시키고, 직류 마그네트론 스퍼터링(DC magnetron sputtering)을 이용하여 탄소나노튜브의 합성을 위한 촉매층을 증착하였다. 이후 열 화학기상증착법을 이용하여 그래핀 위에 탄소나노튜브를 합성함으로써 그래핀-탄소나노튜브 혼성 구조를 제작하였다. 합성된 그래핀-탄소나노튜브의 구조적 특징은 주사 전자 현미경(scanning electron microscopy)을 통해 확인하였고, 촉매의 표면 형상 및 화학적 상태는 원자힘 현미경(atomic force microscopy)과 X선 광전자 분광법(X-ray photoelectron spectroscopy)을 통해 확인하였다. 또한 제작된 그래핀-탄소나노튜브의 전기적 특성 측정을 통해 나노전자소자로의 응용가능성을 조사하였다.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.219-224
• /
• 2006

3 차원 입력 장치는 키보드나 마우스 같은 일반적인 입력 장치로는 받아 들이기 어려운 3 차원 입력을 사용자로부터 간편하고 직관적인 방법으로 받아들일 수 있다는 측면에서 활발히 연구 및 사용되고 있다. 또한 햅틱 장치는 가상 물체의 조작에 따른 시각적인 피드백 외에 가상 물체의 느낌을 피드백 힘을 통해 사용자에게 전달해 줌으로써 컴퓨터와 사용자간의 상호 작용에 큰 도움을 준다. 본 논문은 햅틱 피드백이 적용된 실시간 가변형 모델과 효과적인 3 차원 입력에 대한 기반 연구를 하고자 한다. 그리고 이에 대한 한 가지 사례로써 햅틱 장치를 이용한 가상 판화 시스템을 제작 한다. 가상 판화 시스템은 시각 처리 부분과 촉각 처리 부분, 그리고 사용자의 3 차원 입력을 돕는 인터페이스 부분으로 구성되어 있다. 시각 처리 부분은 3 차원 공간 상에서 사용자의 조각에 따른 판화 표면의 변형을 처리하며 촉각 처리 부분은 실제 판화를 제작할 때 느끼는 촉각을 햅틱 인터페이스를 이용하여 사용자에게 전달한다. 이를 위해 먼저 시각 처리 부분에서는 NURBS 기반의 자유 형상 변형 (FFD)기법을 이용하였는데 가상 조각도에 의한 물체 표면의 지역적인 변형을 구현하기 위해 조각도가 닿는 부분에 대해 기조 격자점 (control point)을 증가시켜 원하는 부분에 대한 지역적인 변화를 용이하도록 하였고 다음으로 촉각 처리 부분에서는 S-chain 모델을 이용하였는데 S-chain 모델을 객체 전체에 적용하지 않고 접촉이 일어날 경우 그 접촉점을 기준으로 S-chain 모델을 지역적으로 적용하는 방법을 고안하여 실제 구현에 이용하였다. 인터페이스 적인 측면에서 사용자의 3 차원 입력장치를 통한 인터렉션은 사용자로 하여금 보다 자유로운 입력을 허용하지만 이에 따른 깊이 지각 문제를 발생시킨다. 이러한 문제를 최소화 시키고 사용자의 깊이 지각을 강화시키기 위해 사용자에게 제공되는 시각적 자극을 변형시키고 다양한 정보를 제공하도록 하였다. 가상 판화 시스템은 가상 환경에서 사용자의 조작에 따른 다양한 결과물을 제작 및 출력해 볼 수 있도록 해준다. 또한 가상 환경에서 이러한 기반을 제공함으로써 가상 환경의 장점인 복사, 이동 및 영구 보존 특성을 동시에 얻을 수 있다. 본 논문은 이러한 작업을 위한 기반 기술로써 햅틱 및 가변형 모델, 3 차원 입력 장치에 대한 시각적 인터페이스에 대해 다루고 이 기반 기술을 바탕으로한 가상 판화 시스템의 구현에 대하여 논하고자 한다.