• Solar Energy
• /
• v.19 no.4
• /
• pp.45-53
• /
• 1999

This report Introduces a total heat exchanger in a solar air-conditioning system using Lithium Chloride(LiCl) solution. The hot and humid outside air is cooled and dehumidified by LiCl solution that is sprayed on the packed layer of the total heat exchanger. LiCl solution once diluted is concentrated again in a regenerator using solar energy. Three types as the packed materials were used in this experiment and the dehumidification performance was evaluated by the value of $k_xa(kg/h{\cdot}m^3{\cdot}{\Delta}x)$, overall mass transfer coefficient based on a humidity ratio potential difference, the influence of inlet LiCl solution flow rate, air flow rate, packed layer height on $k_xa$ was investigated. It was found that air flow rate, LiCl solution flow rate, packed layer height for all types had a great influnce on the value of $k_xa$.

• Journal of Korea Water Resources Association
• /
• v.48 no.2
• /
• pp.91-103
• /
• 2015

This paper presents the systematic approach to positively skewed shape of instantaneous unit hydrograph (IUH), that is one of the universal features of hydrologic response function. To this end an analytical expression of statistical moments for IUH is derived within the framework of geomorphologic instantaneous unit hydrograph (GIUH) theory and quantified according to the concept of hydrodynamic, geomorphologic and kinematic heterogeneity. There is a big scale difference between hillslope and channel flow path system. Although the former has the much smaller level of scale its variation coefficient tends to be higher and coefficient of skewness has the different trend than the latter. The shape of IUH is likely to be much more affected by kinematic heterogeneity rather than hydrodynamic heterogeneity and its combined effect with geomorphologic heterogeneity is the major cause of skewing hydrologic response function. Statistical features of hillslope and channel flow path can be transferred into hydrologic response function in the form of dimensionless statistics and their relative importance forms the general shape of hydrologic response function.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.4 s.77
• /
• pp.499-509
• /
• 2005

The excessive wind-induced motion of tall buildings most frequently result from vortex-shedding-induced across-wind oscillations. This form of excitation is most pronounced for relatively flexible, lightweight, and lightly damped high-rise buildings with constant cross-sections. This paper discusses the aerodynamic means ofmitigating the across-wind vortex shedding induced in such situations. Openings are added in both the drag and lift directions in the buildings to provide pressure equalization. Theytend to reduce the effectiveness of across-wind forces by reducing their magnitudes and disrupting their spatial correlation. The effects of buildings with several geometries of openings on aerodynamic excitations and displacement responses have been studied for high-rise buildings with square cross-sections and an aspect ratio of 8:1 in a wind tunnel. High-frequency force balance testshave been carried out at the Kumoh National University of Technology using rigid models with 24 kinds of opening shapes. The measured model's aerodynamic excitations and displacement were compared withthose of a square cylinder with no openings to estimate the effectiveness of openings for wind-induced oscillations. From these results, theopening shape, size, and location of buildings to reduce wind-induced vortex shedding and responses were pointed out.

• Journal of Korean Society of Forest Science
• /
• v.78 no.4
• /
• pp.381-395
• /
• 1989

The main purpose of this research is to provide scientific informations about standard wage and performance tariffs in forest management with special reference to working time for thinning. To identify relationships between net working time and tree characteristics, three geographically different sample plots were established at Yangsan, Bongpyung and Jinan and 460 oaks, 372 Japanese larches, 232 red pine and 240 pitch pine mere selected at each sample plots. The results of statistical analysis using multiple regression are as follows ; 1. Five independent variables of breast height diameter(DBH), mid-diameter(MD) large end diameter(LD), log-length(L), No. of branches(NOB) were stable independent of worker and tree species. 2. Comparing correlation coefficient of five independent variables, the best predictive variables, breast height diameter and No. of branches, were selected. Breast height diameter and No. of branches were identified as the most important independent variables in terms of effect on the dependent variable of the working time. 3. Comparing coefficient of determination (Rp) and residual mean square (MSEp), the best Linear regression equation for each tree species was selected as follower : $WT=a+b1{\times}NOB+b2{\times}DBF$ 4. Proportion of hang-up time to total working time in thinning were 66% in oak stand, 74%, in Japanese larch stand, 55%, in red pine stand and 52% in pitch pine stand, respectively. 5. Based on the best regression equation, a table of working time was made by strata of number of branches and breast height diameter. 6. Total working time using the best regression equation in Table 5 can be predicted in terms of felling time, limbing time, hang-up time, i.e., total working time increases by 11 to 13 seconds with every 1 centimeter increase in breast height diameter from 7 to 16 centimeter.

• Journal of Korean Philosophical Society
• /
• v.129
• /
• pp.291-313
• /
• 2014

The aim of this paper is to clarify the Aristotle's conception of change(kinesis). Aristotle defines the change as a process which actualize a potentiality. From Aristotle's definition of the change, a number of consequences flow directly about how to conceptualize it. First, the change is fundamentally directional. Second, if we do not know what the change is directed toward, we do not understand what the change is. Third, everything that changes is caused to change by a distinct cause of change, a changer. Fourth, there is a single actualization of cause and subject of the change. All change, for Aristotle, is the change of an enduring subject. And all change occur in the infinite(to apeiron) which is time, space, matter. It would be absurd to equate the whole and the infinite, for that would be to say that the unlimited had a limit. The infinite does not contain, but in so far as it is infinite, is contained. And due at least in part to its potentiality, the infinite is unknowable. Because it lacks a form. The infinite traditionally derived its dignity from being thought of as a whole in which everything is contained. But Aristotle removes the infinite from its position of majesty. Aristotle's this idea was a revolution in philosophical perspective.

• Journal of Adhesion and Interface
• /
• v.20 no.1
• /
• pp.23-28
• /
• 2019

In this study, the micro- and nano-particles were used and their shapes were transferred into the polydimethylsiloxane (PDMS) film to fabricate the dry adhesives and their properties were investigated. The Cu nanoparticles of the sizes of 20 nm, 40 nm and 70 nm and the polymethylmethacrylate (PMMA) beads of the size of $5{\mu}m$ were used to transfer their images and the resultant properties of the dry adhesives were compared. The effects of particle size and materials on the mechanical property, tensile adhesion strength, light transmittance, surface morphology, water contact angle were studied. The dry adhesives obtained from the transfer process of Cu nanoparticles with the size of 20 nm resulted in the enhancement of tensile adhesion strength more than 300% compared to that of the bare PDMS. The formation of nanostructure of large surface area on the surface of the PDMS film by the Cu nanoparticles may responsible for the improvement. This study suggests that the use of nanoparticles during the fabrication of PDMS dry adhesives is easy and effective and could be applied to the fabrication of the medical patch.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.4
• /
• pp.45-53
• /
• 2023

In this study, to analyze the correlation of surface chloride and corrosion amount level according to the installation location of steel members exposed to the marine environment, the surface chloride and mean corrosion depth were evaluated by member units for box girder members of the offshore steel bridge and box specimens. The surface chloride was measured monthly using the Bresle method for one year. The corrosion amount was evaluated by converting the weight loss due to corrosion products generated in the monitoring steel plate into mean corrosion depth. As a measurement result of the surface chloride and corrosion amount, relative differences in surface chloride and mean corrosion depth were appeared depending on the shape or installation location of the steel members. Moreover, even if members of the same shape were installed in the same bridge, it was confirmed that the corrosion amount was increased locally and rapidly. The tendency of corrosion amount depending on the surface chloride was evaluated to analyze the correlation between surface chloride and corrosion amount, and the relation equations that can asseses the corrosion amount depending on the surface chloride were analyzed. From the results of the correlation between surface chloride and corrosion amount, it was found that the corrosion amount of the steel member affected by the surface chloride was varied up to about 1.15 times depending on the structural detail.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.2
• /
• pp.106-113
• /
• 2018

The Intense acoustic wave generated by the jet flame at the lift-off causes the vehicle to vibrate in the form of acoustic loads. The DSM-II(Distributing Source Method-II), which is a representative empirical acoustic loads prediction method, is a method of distributing a noise source along a jet flame axis and has advantages in calculation cost and accuracy. However, due to the limitation of the distributing method, there is a limit to accurately reflect the various launch pad configurations. In this study, acoustic loads prediction method which can freely distribute noise sources is studied. by introducing NURBS(Non-Uniform Rational B-Spline) modeling into empirical prediction method. For the verification of the newly introduced analytical technique of the NURBS, the acoustic loads prediction for the Epsilon rocket's low-noise launch pad shape was performed and the results of the analysis were compared with the existing prediction methods and experimental results.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.5
• /
• pp.37-42
• /
• 2014

The objective of this study is the frequency of the noise source 170 dB level of impulsive sound attenuation performance by earplugs to identify, to analyze the frequency characteristics of a shape and pattern. The attenuation performance of the impulsive noise by the frequency levels on the Combat Arm and 3M Form types 1100 Earplugs were evaluated. In order to check the sound attenuation performance of the B&K head and torso simulator and sound attenuation performance of the ear simulator data was verified. Previous studies have most impact, even in the noise source and the impulse noise level is 140 dB, but this study is higher than that of the impulsive noise source features. The results of the impulse noise attenuation effect is frequency-dependent mean 28.58 dB.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.9
• /
• pp.735-741
• /
• 2018

In this paper, the surface recession of ablative materials was quantitatively analyzed using a high-speed camera and a three-dimensional profilometer. The ablation tests of the graphite and carbon/phenolic composite samples were performed using a 0.4 MW arc-heated wind tunnel for simulating the atmospheric re-entry environment. The real-time images during the ablation test were captured by the high-speed camera, and analyzed to calculate the surface recession and recession rate. Also, the surface data of samples were obtained using a three-dimensional profilometer, and the surface recession was precisely calculated from the difference of height between the surface data before and after the test. It is effective to complement the two measurement results in the comprehensive analysis of surface recession phenomena.