• Journal of computational fluids engineering
• /
• v.18 no.4
• /
• pp.74-81
• /
• 2013

A numerical design analysis is conducted to search for an optimal shape of outlet in a rotating-disk CVD reactor. The goal is to suppress flow recirculation that has been found in a reactor having a sudden expansion of flow passage outside of the rotating disk. In order to streamline gas flow, the sidewall at which the flow in the Ekman layer is impinged, is tilted. The axisymmetric laminar flow and heat transfer in the reactor are simulated using the incompressible ideal gas model. For the conventional vertical sidewall, the flow recirculation forming in the corner region could be expanded into the interior to distort the upstream flow. The numerical results show that this unfavorable phenomenon inducing back flow could be dramatically suppressed by tilting the sidewall at a certain range of angle. The assessment of deviation in deposition rate based on the characteristic isotherm illustrates that the sidewall tilting may expand the domain of stable plug-like flow regime toward higher pressure. A physical interpretation is attempted to explain the mechanism to suppress flow recirculation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.86-86
• /
• 2011

첨단 공정이 필요한 반도체와 LCD, PDP, LED 등의 디스플레이 및 IT 부품을 제조하는데 필요한 장비의 고성능화와 작업환경의 고청정화에 따른 초고진공펌프의 수요 확대와 앞으로 전개될 한-미 FTA에 따른 시장 확대로 인해 크라이오펌프의 국산화가 시급한 실정이다. 고성능 크라이오펌프를 만들기 위해서는 냉각판을 극저온으로 냉각하기 위한 극저온 냉동기 개발도 중요하지만 냉각판(cryoarray)에 최대한 많은 분자를 포획시키는 것 또한 최우선적으로 고려되어야 할 사항 중 하나이다. 이에 본 논문은 크라이오펌프용 냉각판의 기체분자 포획능력에 대하여 연구하였다. 냉각판의 분자포획능력의 해석은 형상계수법(view factor method)을 이용해 수행하였다. 해석에 이용한 냉각판은 현재 상용화된 모델들 중 원형 중앙판에 45$^{\circ}$ 하향 skirt가 달린 형태이며 8장의 냉각판이 일정한 간격을 두고 아래쪽으로 적층되어있고 이를 기본 모델로 하여 skirt의 형상이 다른 3장의 냉각판을 가진 네 가지 모델을 해석하였다. 해석에 이용한 냉각판의 기체분자 포획능력이 구속된 형상에서 얼마나 우수한가를 알아보기 위해 크라이오펌프의 입구 직경과 냉각판 중앙 원판의 직경비, 냉각판 사이의 거리, 그리고 skirt의 길이를 변화시켜가며 극저온 냉각판에 직접 응축되는 typeII가스와 흡착제가 도포된 부분에 의해 흡착되는 typeIII가스로 분류하여 해석을 수행하고 그 결과를 비교, 분석하였다. 크라이오펌프의 입구 직경과 냉각판 중앙 원판의 직경비가 증가함에 따라 typeII가스와 typeIII가스 모두 기체분자 포획능력이 증가하며 극저온 냉각판 사이 거리의 변화에 따른 기체분자 포획능력은 typeII가스의 경우 극저온 냉각판 사이의 거리가 증가할수록 증가한다. 하지만 typeIII가스는 모델 A, C의 경우 증가하고 모델 B, D의 경우 증가하다가 다시 약간 감소한다. skirt 길이 변화에 따른 기체분자 포획능력은 두 가스 모두 skirt 길이가 증가함에 따라 점점 급격하게 증가하고 모델 B, D는 나머지 두 모델에 비해 큰 값을 갖는다. 기체분자 포획능력을 해석한 결과를 실제 배기속도와 비교할 경우 절대적 수치로써의 비교는 어려우나 각 모델의 형상의 차이에 의한 상대적인 비교는 가능하다.

• Imaging Science in Dentistry
• /
• v.31 no.2
• /
• pp.93-99
• /
• 2001

Purpose: To analyze the possible association between magnetic resonance imaging signal intensity of temporomandibular joint disk and posterior attachment, and the type and extent of disk displacement, disk configuration, effusion and clinical signs in patients with internal derangement. Materials and Methods: Magnetic resonance images of the 132 temporomandibular joints of 66 patients with temporomandibular joint displacement were analyzed. The clinical findings were obtained by retrospective review of the patients' records. The type and extent of disk displacement, disk configuration and effusion were evaluated on the proton density MR images. The signal intensity from the anterior band, posterior band and posterior attachment were measured on MR images. The associations between the type and extent of disk displacement, disk configuration, effusion and clinical signs and the MR signal intensity of disk and posterior attachment were statistically analyzed by student's t-test. Results: Of 132 joints, 87 (65.9%) showed anterior disk displacement with reduction (ADR) and 45 (34.1%) showed anterior disk displacement without reduction (ADnR). The signals from posterior attachments were lower in joints with ADnR than those of ADR (p<0.05). The results showed statistically significant (p<0.05) association between the type and extent of disk displacement and disk configuration, and decreased signal intensity of posterior attachment. There were no statistical associations between pain, noise and limited mouth opening, and signal intensity of disk and posterior attachment. Conclusions: The average signal from posterior attachment was lower in joints with ADnR than that of ADR. The type and extent of disk displacement and disk configuration appeared to be correlated with the signal intensity from posterior attachment.

• Solar Energy
• /
• v.17 no.4
• /
• pp.13-22
• /
• 1997

Drag reduction produced by the dilute solution of polymer under turbulent flow in a rotating disk apparatus(RDA) was investigated in this study for the purpose of potential application to the Ocean Thermal Energy Conversion(OTEC) system. Four different molecular weights of poly(ethylene oxide)(PEO) were used as drag reducing additives, and synthetic seawater was adopted as a solvent. Experiments were undertaken to observe the dependence of drag reduction on various factors such as polymer molecular weight, polymer concentration and the rotating speed of the disk. The concentration dependence on the drag reduction of this polymer system was shown to obey an empirical drag reduction equation of the Virk's universal correlation.

• Journal of the Korean Institute of Gas
• /
• v.19 no.4
• /
• pp.55-61
• /
• 2015

In this paper, the displacement behavior characteristic of hollow rollers with various cross sectional area profiles and circular plate for load supporting capacity increment has been presented using a finite element method. The FEM results present that the hollow roller with X-shaped or Y-shaped columns between outer tube, middle tube and inner tube reduces a maximum displacement at the middle length of hollow rollers. And the circular plate, which is inserted at the middle of the hollow roller, is very useful to reduce the maximum displacement of hollow rollers with the plate thickness of 30~40mm. This paper presents the weight vs the maximum displacement ratio in which is represented for the optimized design as a function of a hollow roller total weight. The FEM analyzed results recommend the design model 4, 5 and 6 of hollow rollers for decreasing the ratio of maximum displacement and total weight of hollow rollers.

• Journal of Energy Engineering
• /
• v.23 no.2
• /
• pp.217-222
• /
• 2014

In order to improve the heat efficiency of the general residential boiler, we performed an experiment of condensation heat transfer to air pre-heating exchanger adhered to the condensing boiler. In this study, surface roughness was imposed on the surface of stainless steel by etching. And in order to evaluate the heat transfer performance on each plate, the counter flow heat exchanger fabricated with polycarbonate in used. As a result, on etching treated plate's overall heat transfer coefficient is higher than the original plate. And etching treated plate during 60 seconds with etchant is the to average 15% compared to bare stainless steel. And we studied the heat transfer enhancement factor through the analysis of surface characteristics using AFM.

• Journal of KIISE:Software and Applications
• /
• v.29 no.1_2
• /
• pp.20-29
• /
• 2002

The composite stock cutting problem is to allocate rectangular and/or irregular patterns onto a large composite stock sheet of finite dimensions in such a way that the resulting scrap will be minimized. In this paper, the distributed simulated annealing with the new cost error tolerant spatial decomposition is applied to the composite stock cutting problem in MPI environments. The cost error tolerant scheme relaxes synchronization and chooses small perturbations on states asynchronously in a dynamically changed stream length to keep the convergence property of the sequential annealing. This paper proposes the efficient data structures for representation of patterns and their affinity relations and also shows how to determine move generations, annealing parameters, and a cost function. The spatial decomposition method is addressed in detail. This paper identifies that the final quality is not degraded with almost linear speedup. Composite stock shapes are not constrained to convex polygons or even regular shapes, but the rotations are only allowed to 2 or 4 due to its composite nature.

• Journal of agriculture & life science
• /
• v.43 no.4
• /
• pp.9-14
• /
• 2009

The purpose of this study was to estimate height growth pattern and to derive site index equation for Pinus densiflora grown at Mt. Osu region, Chungnam. A total of 21 repre - sentative trees from the established temporary plots around Boryeng and Cheongyang regions were destructively sampled to measure diameter, height, volume growth per 1-year interval by using of DTRS- 2000 measurement instrument. The Schnute growth function was select ed for height growth prediction using 181 height-age paired observations and derived anamorphic base age invariant site index curves (base index age 30 years). The fitted index and the asymptotic value of Schnute model indicated both 0.96 and 10.8 meter, respectively. The results suggested in this study could be very useful to understand the height growth pattern and productivity of the site quality on Pinus densiflora grown at Mt. Osu region, Chungnam.

• Journal of TMJ Balancing Medicine
• /
• v.12 no.1
• /
• pp.28-31
• /
• 2022

위에서 살펴본 바와 같이 나는 급성 턱관절장애의 경우, 첫번째 유형은 주로 턱관절 디스크공간의 문제와 하악의 위치를 바로잡아주는 근육의 문제가 주 원인일 것으로 추정하고 있다. 만약 턱관절 디스크공간이 정상공간이라면 턱의 지그재그 움직임이나 턱관절잡음, 턱통증, 턱탈구, 그리고 개구장애 등이 발생할 수 없기 때문이다. 그리고 근육의 문제 중에서는 턱관절 디스크원판을 양측에서 잡아주는 내외측 익돌근의 문제가 가장 많은 영향을 미치고 있다. 특히 내측 익돌근의 긴장 및 수축이 디스크 원판을 내측으로 빠져나가게 함으로써 하악의 좌우 지그재그 움직임을 야기시키고 턱관절잡음이나 턱통증 및 개구장애를 유발하기 때문이다. 나머지는 저작에 관여하는 근육들이 그 다음으로 영향을 미치는 것으로 예측하고 있다. 그러나 제2형 급성 턱관절장애의 경우는 제1형 급성 턱관절장애가 한단계 더 발전하여 이와 연관된 근육이나 인대의 긴장수축이 오랜 시간 진행되어, 이들이 다시 상부 경추의 아탈구와 두개골의 비정상적 움직임에까지 영향을 미쳐 나타나는 것으로 생각된다. 그렇게 되면 뇌에서 필요 충분한 뇌혈액공급이나 뇌척수액순환의 문제를 일으킬 수 있기 때문이다. 그리고 제1형 만성 턱관절장애의 경우는 제2형 급성 턱관절장애가 좀 더 진행되면서 척추 및 근골격계의 구조변화, 교합 및 턱의 구조변화 그리고 안면구조의 변화에 이르기까지 점점 진행되어 나타나는 것으로 보인다. 따라서 각종 척추 디스크질환, 관절질환을 비롯해서 두개천골계의 순환문제, 부정교합 및 턱 비대칭, 안면 비대칭의 문제를 유발하게 된다고 추정된다. 그러나 두번째 유형의 만성 턱관절장애는, 턱에서 지속적이고 반복적인 그리고 과다한 부정적 자극들이 오랜 기간 누적되면서 턱에 분포된 C 섬유를 비롯한 3차신경의 가소성변화를 유발하면서 결국 중추신경계를 포함하여 전체신경계의 회로망에까지 파급되어 다양한 만성질환 또는 난치성 질환들이 양산되는 것으로 추정하고 있다. 아마도 지금까지 서양의학에서 아직 밝혀내지 못한 대부분의 질병들이 여기에 포함되지 않을까 하는 것이 나의 생각이다.

• Journal of the Korean Arthroscopy Society
• /
• v.7 no.2
• /
• pp.153-159
• /
• 2003

Purpose : The purpose of this study was to compare the pattern of displaced bucket-handle tear of lateral and medial menisci and the treatment modality and results from accompanying injury. Materials and Methods : Patients who were diagnosed for displaced bucket-handle tear of medial meniscus (group I: 52patients, 52cases) and lateral meniscus (group II: 31patients, 32cases) from September 1998 to December 2002. The mean ages were 25years $(16\~66)$ for Group I and 29years $(18\~63)$ for Group II, and the average follow-up period were 18months $(12\~44)$ and 13months $(6\~46)$, respectively. The zone of meniscus tear and the existence of accompanying injury were verified through intraoperative arthroscopy and discoid type meniscus was additionally examined for group II. The assessment was made according to the physical examination and clinical pattern at the postoperative last follow-up, and the 2nd look arthroscopy was performed in 19cases $(23\%)$ for the cases accompanying anterior cruciate ligament (ACL) injury in both groups. Results : There were 38cases $(73\%)$ in group I, 5cases $(16\%)$ in group II for associating ACL injury. We observed discoid type meniscus (19cases, $59\%$) in group II. At last follow-up clinical success in repair cases of group I and II are 22cases $(85\%)$, 2cases $(67\%)$, in resection cases are 26cases $(100\%)$, 26cases $(93\%)$ respectively. Reoperation is performed 2cases in repair cases of group I. One case is re-rupture, the other case is newly developed tear in white-white zone. Reoperation is performed 2cases due to remnant meniscal tear in resection cases of group II. All of 2cases are discoid type menisci. Conclusion : Displaced bucket-handle tear of medial & lateral menisci would be substantially different an aspect, considering on difference would help to select proper treatment modality.