• 대한기계학회논문집B
• /
• 제25권7호
• /
• pp.915-922
• /
• 2001

A new phase-average technique using instantaneous velocity fields obtained by a PIV method has been developed. The technique tracks vorticity centers and estimates the value of circulation for a chosen domain. The locations of vortex-centers and the magnitudes of circulation are matched together then showing a sine wave feature due to the periodic vortex shedding from the circular cylinder. Ensemble averaged and phase averaged velocity fields are successfully measured for the circular cylinder wake where Reynolds number is 3900 based on free stream velocity and cylinder diameter. The convection velocities of the vortices center and the vortex shedding frequency were measured by a single hot-wire probe.

• 한국가시화정보학회지
• /
• 제6권2호
• /
• pp.3-8
• /
• 2008

A new 3D-PTV algorithm(a Volume PTV) based upon a hybrid fitness function has been constructed. A coherency fitness function is introduced using the information of space and time to sort out the correct particle pairs between the two camera images. The measurement system consists of two-high-definition-cameras($1k{\times}1k$), a Nd-Yag laser and a host computer. The developed algorithm has been employed to investigate the flow features of the cylinder wake. The Reynolds numbers with the cylinder diameter(d=10 mm) are 360, 540, 720, 900, 1080 and 1260. Two-dimensional displacements of the particles of each camera's image and neighbouring constraints were introduced to reduce the calculation loads. More than 10,000 instantaneous 3D vectors have been obtained by the constructed algorithm. The constructed algorithm could recover more than $80{\sim}90%$ of the particle numbers in the image condition.

• 대한기계학회논문집B
• /
• 제20권6호
• /
• pp.2014-2022
• /
• 1996

Flow characteristics of the wake behind a finite circular cylinder(FC) mounted on a flat plate was experimentally investigated. Three finite cylinder models having aspect ratio (length to diameter ratio, L/D) of 6,10 and 13 were tested in this study. Wake velocity was measured by a hot-wire anemometry at Reynolds number of 20,000, and the results were compared with those of two-dimensional circular cylinder. As a result, the free-end effect on the wake structure becomes more dominant with decreasing the aspect ratio(L/D) of the finite cylinder. Invisid flow entrained into the wake region decreases the turbulence intensity and periodicity of the vortex shedding due to existence of the free end. From spectral analysis and cross correlation of the velocity signals, vortices having 24Hz frequency characteristics are found in the down wash flow just behind the free end. There exists very complicated flow near the free end due to interaction between the entrained flow and streamwise vortices. Vortex formation region is destroyed significantly in the near wake and shows quite different wake structures from those of 2-D cylinder.

• 한국항공우주학회지
• /
• 제30권3호
• /
• pp.87-95
• /
• 2002

원주의 항력 감소와 원주 주위 유동의 제어에 대하여 실험적으로 연구하였다. 원주 주위 유동을 제어하기 위하여 작은 제어봉을 원주 전방에 설치하였다. 실험시 원주 직경(D=30mm)에 기초한 레이놀즈수는 $Re=2 {/times} 10^4$이었다. 제어봉의 직경(d)은 4mm, 5mm, 6mm, 7mm로 변화시켰으며, 원주와 제어봉 사이의 거리(L)를 조절하면서 원주의 표면압력분포와 후류속도를 측정하였다. 제어봉으로부터의 와 유출이 사라지는 임계거리 (critical distance) $ L_C$는 $ L_C$ /D=1.5+0.83d이었는데, $ L_C$를 전후로 유동특성과 항력값이 크게 바뀌었다. 특히 원주와 제어봉 사이의 거리가 임계거리보다 짧은 경우에는 항력이 감소하다가 $ L_C$보다 크게 되면 증가하는 경향을 보였다. 제어봉의 직경이 d/D=0.233인 경우, L/D=2.013의 조건에서 원주는 약 29%의 항력 감소를 보였고, 전체 항력은 L/D=1.833조건에서 약 25% 항력이 감소하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권3호
• /
• pp.58-69
• /
• 2000

An experimental study was conducted to investigate the influence of the spinning control cylinders which was set on the surface of a fixed circular cylinder in uniform flow, $Re=1.24\times10^4$. The measurements of velocity vectors and pressure distributions are carried out in various spin parameters and angles of spinning control cylinder. The results show that velocity profiles and pressure distributions are different with angles of control cylinder and spin parameters. When the control cylinder angle is $100^{\circ}$, there is more effect in increasing the velocity and the pressure distribution than other cases. In this case, the vortex shedding frequency was increased as increasing spin parameter.

• 대한기계학회논문집B
• /
• 제40권6호
• /
• pp.373-381
• /
• 2016

본 연구는 고 레이놀즈 영역에서 후류측에 분리된 분할판(Detached splitter plate)을 가진 원주의 유동장 특성을 양 항력측정 실험과 PIV를 이용한 가시화 실험으로 파악한 것이다. 실험파라메터는 원주 한변의 길이에 대한 분할판의 폭비(H/B=0.5~1.5) 및 원주 후면에서부터 분할판의 앞전까지의 거리(G/B=0~2)로 했다. 분할판의 폭비를 고정시킨 경우 원주의 항력감소율은 간격비가 증가할수록 증가한 후 감소하는 특성을 보였다. 또한 같은 간격비에서는 분할판의 폭비가 클수록 원주의 항력감소율이 컸다. 분리된 분할판의 설치에 의해 분할판의 상, 하부에는 서로 반대방향의 볼테스가 발생되었고, 이 볼텍스가 원주 후류측에 역류를 발생시켜, 원주에 작용하는 항력을 감소시켰다.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2001년도 춘계학술대회 논문집
• /
• pp.52-57
• /
• 2001

Laminar two-dimensional time-dependent flow past a circular cylinder is numerically investigated using direct numerical simulation for the low Reynolds number (Re=164∼280). The higher-order finite difference scheme is employed for the spatial distributions along with the second order Adams-Bashforth and the first order backward-Euler time integration. The convection term is applied by the 7th order up wind scheme and the pressure and viscosity terms are applied by the 4th order central difference. The grid system makes use of the regular grid system and it is generated by an equation. The calculated results of drag coefficients, lift coefficients, pressure distributions, and vorticity contours and other information are compared with experimental and numerical ones. These results obtained by the present DNS show good agreement with the previous studies.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권4호
• /
• pp.857-868
• /
• 2001

The aerodynamic forces and wake structures of the non-rotating downstream cylinder which is located behind the spinning upstream cylinder in tandem and staggered arrangement have been investigated by experimental method at Re= $1.32{\times}10^4$. The measurements of wake flow and pressure distributions of downstream cylinder are carried out in various spin parameters by combination of both longitudinal spacing rations L/d=1.5, 3.0, 4.5 and transverse spacing ratios T/d =0.0, -0.5, 0.5. For the present experiment, it has been found that the spin parameter of spinning upstream cylinder affect more easily the downstream cylinder in tandem arrangement than that in staggered arrangement.

• 대한기계학회논문집B
• /
• 제30권4호
• /
• pp.298-305
• /
• 2006

The flow around a circular cylinder which oscillates rotationally with a relatively high forcing frequency has been investigated experimentally using flow visualization and hot-wire measurements. Dominant parameters are Reynolds number (Re), oscillation amplitude $({\theta}_A)$, and frequency ratio $F_R=f_f/f_n$, where $f_f$ is the forcing frequency and $f_n$ is the natural frequency of vortex shedding. Experiments were carried out under the conditions of $Re=4.14{\times}10^3,\;{\theta}_A={\pi}/6$, and $0{\leq}F_R{\leq}2$. The effect of frequency ratio $F_R$ on the flow structure of wake was evaluated by measuring wake velocity profile and spectral analysis of hot-wire signal. Depending on the frequency ratio $F_R$, the cylinder wake has 5 different flow regimes. The vortex formation length and vortex shedding frequency are changed significantly before and after the lock-on regime. The drag coefficient was reduced under the condition of $F_R<1.0$ and the maximum drag reduction is about 33% at $F_R=0.8$. However, the drag is increased as $F_R$ increases beyond $F_R=1.0$. This active flow control method can be effective in aerodynamic applications, if the forcing parameters are selected optimally.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권2호
• /
• pp.264-270
• /
• 2011

본 연구는 직렬배열 상태에 놓인 3원주 주위의 유동장 특성을 PIV를 이용하여 파악한 것이다. 실험은 레이놀즈수 Re=$3.0{\times}10^3{\sim}5.0{\times}10^3$ 범위 내에서 수평간격비(P/D)를 P/D=1.25~3.75로 변화시켜가며 행하였다. 각각의 실험 파라메터에서 Strouhal 수, 와도변화, 순간 및 평균 속도벡터 및 속도분포를 측정하였으며 그 결과를 요약하면 다음과 같다. 3번째 원주 후방에서 측정한 Strouhal 수는 수평간격비 P/D에 따라 크게 3가지 영역으로 구분되며, 각 원주의 후류에서의 흐름 패턴은 이들 영역에 따라 달랐다. 각 원주 후방에서 시간평균 흐름은 거의 정체상태에 있었으며, 그 정체영역의 크기는 1번째, 2번째, 3번째 원주 순으로 작았다. 2번째 원주 전, 후방 영역에서는 받음각 미소 (${\alpha}= {\pm}5^{\circ}$)에 따라 서로 반대방향의 볼텍스가 형성했다.