• Korean Journal of Poultry Science
• /
• v.51 no.2
• /
• pp.65-71
• /
• 2024

The feather-sexing method is widely used commercially for chick sex identification. However, for feather-sexing to be industrially practical, the early-feathering (EF) and late-feathering (LF) genes must existed within the foundation stock, a suitable feather-sexing lines must be established, and the accuracy of sex identification by feather-sexing must be ensured. Therefore, this study introduces the method of constructing the Korean native chickens (KNC) feather-sexing lines using EF and LF genes and evaluates the effectiveness of feather sex determination on commercial chicks produced from the constructed KNC lines. The results showed that both EF and LF chickens existed within the foundation stock, with the frequency of LF genes ranging from 0 to 0.205. In feather-sexing line establishment, the paternal strain of the grandparent stock (GPS) was fixed as EF (kk) for both sexes, while the maternal strain was composed of males with LF homozygotes (Z^KZ^K) and females with EF (Z^kW). Thus, in the parent stock (PS), male breeder had EF (Z^kZ^k) and female breeder had LF (Z^KW), resulting in chicks produced from their crosses having LF (Z^KZ^k) for males and EF (Z^kW) for females, allowing sex determination based on feather development. Additionally, to evaluate the effectiveness of feather-sexing for the produced commercial chicks, a study was conducted on 1,000 samples of the produced chicks to investigate the concordance between vent-sexing and feather-sexing, showing a matching rate of 93.1%.

• Ecology and Resilient Infrastructure
• /
• v.4 no.1
• /
• pp.34-43
• /
• 2017

The Naeseong Stream as a tributary of Nakdong River has conserved the unique structure and function of a typical sand-bed stream ecosystem. However, it is expected to change the stream bed environments and then the fish fauna in the downstream of the dam after the operation of the Yeongju Dam from 2016. We collected fishes and investigated their habitat environments from 2014 to 2016 in the downstream of the Yeongju Dam under construction in order to monitor changes in habitat environment, fauna and community structure of fishes in the Naeseong Stream. The size of the bed materials increased immediately downstream of the Yeongju Dam under construction. Before the operation of the Yeongju Dam, Zacco platypus was dominated and Opsarichthys uncirostris amurensis, Coreoleuciscus splendidus, Hemibarbus longirostris and Pseudogobio esocinus were sub-dominated according to the different sampling sites. Hemibarbus labeo, H. longirostris, Pseudogobio esocinus, Gobiobotia nakdongensis, Cobitis hankugensis and Leiocassis ussuriensis were found as a psammophilous fish specific to sand stream in the Naeseong Stream. At the downstream of the dam, the fish community was classified into a group of gravel-bed fishes such as Microphysogobio yaluensis, Coreoleuciscus splendidus and Coreoperca herzi and a group of sand-bed fishes such as Hemibarbus labeo, Cobitis hankugensis and Gobiobotia nakdongensis. These fish communities gradually tended to change from sand-bed fish community to gravel-bed fish community during the construction of the Yeongju Dam. Therefore, it is necessary to collect the baseline data for the stream ecosystem conservation in the sandy stream by continuously monitoring changes in the environment and fish in the downstream of the Youngju Dam.

• Analytical Science and Technology
• /
• v.6 no.5
• /
• pp.417-424
• /
• 1993

Eight-coordinate tetrakis molybdenum(IV) complexes containing 5,7-dichloro-8-hydroxyquinolinol(Hdcq) and 2-mercaptopyrimidine(Hmpd) has been prepared. $Mo(mpd)_4$, $Mo(dcq)(mpd)_3$, $Mo(dcq)_2(mpd)_2$, $Mo(dcq)_3(mpd)$ and $Mo(dcq)_4$ complexes have been isolated by thin-layer chromatography on silicagel plates. These complexes have been charaterized by $^1H-nmr$ spectrum and UV-Vis. spectrum. The chemical shift values of the protons ${\alpha}$ to the nitrogen in the ligands are shifted to down field. The relative intensities of the peaks which are positioned at the same proton of $Mo(dcq)(mpd)_3$ and $Mo(dcq)_3(mpd)$ are observed in 2:1 ratio, in case of $Mo(dcq)_2(mpd)_2$ appears in approximately a 1:1 ratio. The stereochemistry of the complexes in discussed in terms of their nmr spectrum and Orgel's rule. By vertue of the intensities (${\varepsilon}$>10,000~25,000) the low energy($16,600{\sim}19,800cm^{-1}$) bands are observed for the electronic spectra of the complexes are assigned as charge transfer bands.

• Archives of design research
• /
• v.19 no.5 s.67
• /
• pp.95-104
• /
• 2006

The advertisement is an informative product in which a company or an organization has made a substantial capital investment in order to achieve their goals based on their carefully thought-out plans. David Ogilvy maintaned that making a headline of an advertisement is worth 80 percent completion of the advertisement. As he insisted, a headline is also the most important element in the printing advertisement. Therefore, the importance of selecting headline's font style is increased because, while creating a headline, it is necessary to consider the emotional aspects of the advertising object that attract the attention of people. Many researchers call 'typography' as 'frozen sound' or 'written sound' because typography not only works as a letter but also provide people with an emotional pleasure. An appropriate selection of headline's font style in the advertisement production makes both the client and the audience for the advertisement satisfied because it reduces the communication risk and makes design results more reasonable. It is difficult to find many decision-making methods for selecting headline's font style. Therefore, the author of this paper investigated the trend of the use of headline's font style in order to help the designer understand headline's font style as one of design factors. As a result of the research, it is possible to conclude that, while selecting the headline's font style, the attributes of a font consist of limited style, and more objective and systematic font selection methods are necessary.

• Polymer(Korea)
• /
• v.30 no.2
• /
• pp.140-145
• /
• 2006

The mort commonly available substrate material is glass in the display fibrication process. However, glass is not desirable due to its heaviness and fragility. Recently, plastics such polysulfone (PSF), polyethesulfone (PES), polycarbonate (PC), polyethylene terephthalate (PET) and cyclic olefin polymers (COP) have been investigated to replace glass as a substrate material for display fibrication. Plastic substrates are advantageous in that they are lightweight, huh impart resistance, flexibility, and ability for roll to roll manufacturing process. But many plastics have poor chemical resistance in organic solvent. The chemica resistance is also lequired because they are exposed to solvents for various chemical treatments din the manufacturing process. So, we have an interest in the chemical modification of PSF to improve chemical resistance. We introduced crosslinkable imide moieties using chloromethylation method for the modification of PSF which could be overcome above shortcomings for display substrate based on plastic film. We prepared the cross-linked polysulfone films which were represented chemical resistance in HeOH, THF, DMSO and NMP. The thermal properties were measured by TGA, DSC and TMA. As the results, we have confirmed to enhance of the thermal property. They had low coefficient of thermal expansion (CTE) which decreased to 15% and had increased $T_g\;from\;180^{\circ}C\;to\;252^{\circ}C$. Cross-linked polysulfone films with imide side-chain had good optical properties and chemical resistance so that they could be used as flexible display substrate.

• Polymer(Korea)
• /
• v.36 no.6
• /
• pp.712-720
• /
• 2012

Thermal degradation for glass fiber-reinforced polyamide 66 composite (PA 66) with respect of thermal exposure time has been investigated using optical microscopy, scanning electron microscopy and Fourier transform infrared spectroscopy. As the thermal exposure time was prolonged, a slight increase in tensile strength for only initial stage and afterward, a proportional decrease of tensile strength was observed. These results can be explained by the increase of crystallinity, followed by the increase of crosslinking density, chain scission and the decrease in chain mobility, due to thermal oxidation with the exposure time. Fourier transform infrared spectroscopy results showed the increase of ketone peak and silica peak on the surface of thermally exposed PA 66. In addition, the thermal decomposition kinetics of PA 66 was analyzed using thermogravimetric analysis at three different heating rates. The relationship between activation energy and lifetime-prediction of PA 66 was investigated by several methodologies, such as statistical tool, UL 746B, Ozawa and Kissinger. The activation energy determined by thermogravimetric analysis had a relatively large value compared with that from the accelerated test. This may result in over-estimating the lifetime of PA 66. In this study, a master curve of exponential fitting has been developed to extrapolate the activation energy at various service temperatures.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.20
• /
• pp.63-68
• /
• 1975

Several high protein mutant lines(M4 plant generation, 1974) obtained from X-ray irradiated Jinheung variety were examined at three different locations for their agronomic characters, protein and grain yields. On the other hand, high protein-short culmed-early maturity mutant line No. 398 (M$_{10}$ plant generation, 1974) induced from Hokwang was crossed back to its mother to investigate the gene(s) controlling protein and its pleiotropic relation to other mutated characters. Although variation of protein percent of mutant lines from Jinheung was comparatively large depending on year and location, most of the high protein mutant lines had higher protein yield per unit area than the mother variety and their grain yields were equal to or better than the mother, being resistant to both leaf and neck blast. They were several days earlier-maturing and had shorter-culm except one mutant line. The culm length and heading date of F$_1$ between high protein mutant 398 and its mother Hokwang were intermediate. Accurate assessment of segregation of culm length and heading date in F$_2$ generation and protein percent in F$_3$ seeds will be conducted in 1975.

• Polymer(Korea)
• /
• v.33 no.5
• /
• pp.446-451
• /
• 2009

Reliability evaluations of linear low density polyethylene (LLDPE) pipe with respect of thermal exposure time have been investigated in accordance with RS M 0042, which is a reliability standard for polymer pipe. As the thermal exposure time is prolonged, a progressive increase, until 250 days, in tensile strength and a slight increase in hardness are observed, while a proportional decrease in elongation at break is showed. These results can be explained by the increase of crystallinity, followed by the increase of crosslinking density, chain scission and the decrease in chain mobility, due to thermal oxidation as the exposure time increases. Long term hydrostatic pressure test result implies the existence of transition point from ductile to brittle fracture. Oxidation induction time (OIT) test is employed to monitor the thermo-oxidative degradation of LLDPE pipe. This result shows that after the exposure time is 250 days, the depletion of antioxidants added in LLDPE pipe occurs. An empirical equation as function of exposure time, under $100^{\circ}C$ thermal-degradation condition, is proposed to assess the remaining amount of antioxidants owing to thermo-oxidative degradation. Fourier transform infrared spectroscopy results show the increase of carbonyl (-C=O) and hydroxyl (O-H) function groups on the surface of thermally exposed LLDPE pipe. This result suggests that the hydrocarbon groups locally undergo the oxidation on the LLDPE surface due to thermal-degradation.

• Journal of Radiation Protection and Research
• /
• v.38 no.2
• /
• pp.100-105
• /
• 2013

With the export of commercial nuclear power plants to UAE and that of a research reactor to Jordan, as well as the additional construction of domestic nuclear power plants, the demand of nuclear manpower is expected to increase sharply. Accordingly, nuclear manpower development is recently becoming an important issue. Major institutes involved in nuclear programs are well equipped with education and training procedures and resources. However, small and medium sized businesses have difficulties to educate their employees due to their limited resources and capacity for the education. Addressing the difficulties, this study is intended to develop and education course in accordance with the "Systematic Approach to Training (SAT)". For this, a survey is conducted on the need of education in small and medium sized businesses, based on which a pilot course on the basics of radiation is developed and operated. An assessment on the development and operation using a survey regarding participants response has shown high grades of performance, i.e. above 4.0 points (full mark: 5.0 points) on each level of expectancy, satisfaction and lecturers' capacity. The experience from this study will be used to develop other programs of nuclear power and ASME code, which are also identified from the need analysis.

• Journal of the Korean Arthroscopy Society
• /
• v.7 no.2
• /
• pp.183-188
• /
• 2003

Purpose : The purpose of this study is to evaluate the results of revision surgery for failed anterior cruciate ligament (ACL) reconstruction using quadruple hamstring tendon autograft. Materials and Methods : From May 2000 to July 2002, six patients received ACL revision surgery using quadruple hamstring autograft for failed ACL reconstruction. Femoral tunnels were made 40 mm in depth and fixed with a cross pin and a bioabsorbable interference screw to fill the bone defect. In tibial tunnels, the grafts were fixed with Intrafix(Mitek, Norwood, MA). In case of tibial tunnel widening, additional screw-washer fixation was done. Follow up was at least 12 months postoperatively. Clinical assessments consisted of Lysholm knee scores, International Knee Documentation Committee(IKDC) evaluation form and manual maximal side to side difference using KT-2000 arthrometer. Results : The average Lysholm knee score improved from 77.2 preoperatively to 87.7 postoperatively. At the final IKDC evaluation, 1 case was graded as normal, 4 nearly normal, 1 abnormal. Mean side to side difference of manual maximum anterior displacement using the KT-2000 arthrometer was 1.8mm. The success rate was $83\%$. Conclusion : ACL revision surgery using quadruple hamstring autograft with double fixation is considered good procedure with successful results.