• Journal of Korea Soil Environment Society
• /
• v.2 no.1
• /
• pp.51-61
• /
• 1997

The objective of this study is to evaluate the feasibility of Pumping-and-Treatment system (PTS) for remediation of the saturated zones contaminated with NAPLs. A simulation is carried out for the removal of DNAPLs (denser-than-water non-aqueous phase liquids) and LNAPLS (lighter-than-water non-aqueous phase liquids) distributing at and below the water table. In the study, LNAPL and DNAPL are assumed to be n-hexane and 1,1-dichloroacetone, respectively. The model system studied consists of four heterogeneous soil layers with different permeabilities. Groundwater flows through the bottom layer and a pumping well is located under the initial water table. The time-driven deformation of the water table and removal efficiency of contaminants are estimated after vacuum application to the inlet of the well. In the calculation, FVM (Finite Volumetric Method) with SIMPLEC algorithm is applied. Results show that removal efficiencies of both DNAPL and LNAPL are negligible for the first 5 days after the PTS operation. However, when the cone-shape water table is formed around the inlet of the pumping well, the rapid removal rate is obtained since NAPLs migrate rapidly through the curvature of the water table. The removal efficiency of DNAPL is estimated to be higher than that of LNAPL due to the gravity. The results also show that the fluctuation or cone-shaped depression of the water table enhances the removal efficiency of NAPLs in saturated zones. The simulation results could provide a basis of the PTS design for the removal of NAPLs in saturated zones.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.43 no.3
• /
• pp.313-319
• /
• 2016

Wolf-Hirschhorn syndrome (WHS), associated with the deletion of the short arm of chromosome 4, causes multiple congenital malformations. Patients suffer from various deformities, including mental and growth disorders, epilepsy, hypotonia, congenital heart defects, and atypical craniofacial features. The "Greek warrior helmet appearance" is the most characteristic feature, with a prominent glabella, high arched eyebrow, broad nasal bridge, and hypertelorism. Cleft lip with or without cleft palate is observed in 30% of patients. Dental structure anomalies also exist including multiple tooth agenesis and over-retained primary molars caused by MSX1 gene impairment, and cone-shaped and taurodontic teeth. This case, a 9-year-old girl with WHS, showed intellectual disability, delayed growth development, previous occurrence of seizures, otitis media, and the typical facial features of WHS. Dental findings included multiple congenital missing teeth, over-retained primary teeth, and severe caries on the primary molars. Dental treatments were performed under general anesthesia. This report documents the characteristics of WHS, including general and oral features, and discusses the importance of oral hygiene and preventive dental management.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.6
• /
• pp.1417-1425
• /
• 1990

In this paper, when the glass plate of fragile material is subjected to impact load, the fracture pattern and the generation phenomenon of cone crack were theoretically clarified by using the analysis method of impulsive stress in the first paper. The numerical analysis results of strain distribution at a distance of 0.1cm, from the impact loading point to 5cm, were compared with experimental results. The main conclusions obtained are as follows; (1) The generation phenomenon of cone crack at the impact fracture of the glass plate can be analytically confirmed by using the three dimensional dynamic theory of elasticity. And the numerical analysis results of strain distribution using this theory are relatively in close agreement with the crack size obtained from the impact fracture experiment. (2) After the stress wave generated at the impact point propagated to the spherical compressive wave, this stress wave reflected from the back surface and reached again at the surface of the plate to the spherical stress wave. Then the generation of cone crack can be confirmed along the stress wave surface. (3) The plate is the thicker, the more is the generation phenomenon of cone crack at the lower impact velocity range (20m/s-35m/s). Because the fracture generate before the maximum tensile stress acting to the glass plate, cone crack was rarely ever generated.

• Journal of the Korean Society of Radiology
• /
• v.14 no.5
• /
• pp.635-642
• /
• 2020

The purpose of this study was to analysis the effects of shielding area of field configuration with changing of sensitivity and density on tube current (milliampere-seconds, mAs) and image quality in automatic exposure control (AEC) system. The equipment used a digital radiography device (Digital Diagnost, Philips, Netherlands), which has a integral type with an X-ray tube and an indirect digital detector. The AEC system conditions were consisted of 9 setting environments, that mode changing of the sensitivity (S200, S400, S800) and the density (+2.5, 0, -2.5). The tube current evaluated automatically exposed mAs under 81 combination conditions crossed by AEC conditions in fixed at 40 kVp. The image quality evaluated the radiographic images that selected valid images by visual assessment the radiographic images of the self-produced conical pyramid phantom and then measured their signal to noise ratio (SNR). As a result, the maximum tube current was 60.0 mAs that automatically exposed conditions were the 100% of shielding area and the sensitivity of S200 and the density of +2.5. The minimum tube current was 0.9 mAs with non-shielding area and the sensitivity of S800 and the density of -2.5. When the shielded area 0% with the sensitivity of S200 and the density of +2.5, the maximum SNR was the highest as 25.2. But when the shielded area 25% with the sensitivity of S800 and the density of -2.5, the minimum SNR was the lowest as 4.7.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.3
• /
• pp.51-60
• /
• 2013

The slime, deposited in the bored pile due to falling soil particle, reduces the bearing capacity of bored pile and thus the stability of construction also decreases. The weight pendulum and iron have been used for estimating the slime thickness based on the subjective judgment and thus the previous method has a limitation of reliability. The objective of this paper is to suggest the method for estimating the slime thickness by using characteristics of electrical resistivity as scientific method. The temperature-compensation resistivity probe (TRP), which has a conical shape and the diameter of 35.7mm, is applied to the measurement of the electrical resistivity in the borehole during penetration. The field tests are carried out for estimating the slime thickness in the application site of bored pile. The slime thickness is calculated through the difference between excavation depth of borehole and measured data. Furthermore, the laboratory tests are also conducted for investigating effects of casing, time elapsing and relative density by using the specimen of slime. The laboratory test supporting the suggested method is reasonable for determining the slime depth. The paper suggests that the electrical resistivity method may be a useful method for detecting slime thickness and the method is expected to be applicable to various sites of bored piles.

• Journal of the Korean Society of Radiology
• /
• v.14 no.4
• /
• pp.455-465
• /
• 2020

The purpose of this study is to evaluate the photoneutron characteristics generated by the linear accelerator target and collimator. The computer simulation design firstly, consisted of a target, a single material target and a composite material target. Secondly, it consisted of a cone beam and a fan beam depending on the type of the collimator. Finally, the material of the fan beam collimator is composed of a single material composed of only lead (Pb) and a composite material collimator composed of tungsten (W) and lead (Pb). The research method calculated the photoneutron production rate and energy spectrum using F2 tally from the surface of a virtual sphere at a distance of 100 cm from the target. As a result, firstly the photoneutron production rate was 20% difference, depending on the target. Secondly, depending on the type of the collimator, there was a 10% difference. Finally, depending on the collimator material, there was a 40% difference. In the photoneutron energy spectrum, the average photoneutron flux tended to be similar to the photoneutron production rate. As a result, it was confirmed that the 9 MeV linear accelerator photoneutron are production increased more by the collimator than by the target, and by the material, not the type of the collimator. Selecting and operating targets and collimator with low photoneutron production will be the most active radiation protection. Therefore, it is considered that this research can be a useful data for introducing and operating and radiation protection of a linear accelerator for container security inspection.

• Korean Journal of Medicinal Crop Science
• /
• v.12 no.1
• /
• pp.67-72
• /
• 2004

For discrimination the origins and the commercial herb medicines of three Angelicae Radixes (Danggui), anatomical characters of leaves, petioles, and root cross-section were investigated and those were compared each other. The key for discrimination of these herb medicines was made by below simple characters: development of periderm, absent and present of collenchyma under the periderm, and distribution of latex tube in cortex. The result of discrimination for the commercial herb medicines based on the discrimination key, Angelicae gjgantis Radix (Angelica Gigas Root), Angelicae Radix (Japanese Angelica Root), and Radix Angelicae Sinensis (Danggui) were correctly identified for Angelica gigas Nakai, A acutiloba Kitagawa, and Angelica sinensis (Oliv.) Diels., respectively. Consequently, anatomical characters could be utilized for useful method to discriminate three Angelicae Radixes (Danggui).

• Membrane Journal
• /
• v.30 no.3
• /
• pp.181-189
• /
• 2020

In the present study, a biomimetic alumina membrane was fabricated by using selenic acid as an electrolyte to overcome the asymmetry limit of the square pulse anodization process. The prepared membrane has conical channels with a minimum diameter of 10 nm, a maximum diameter of 50 nm, and a length of 5 ㎛. The rectification property was higher than membranes fabricated by sulfuric acid. It showed 2.9 times larger current at +1 V than -1 V. Also, the membrane, which sulfonic acid group was introduced by surface modification, showed 4.2 times larger rectification property at -1 V than +1 V. Theoretical verifications were supported by the numerical analyses of 2D models. The results of the present study present a convenient method to fabricate two type membranes with different rectification properties and are expected to be used to control ion transport.

• Journal of Elementary Mathematics Education in Korea
• /
• v.17 no.1
• /
• pp.1-17
• /
• 2013

In this paper, firstly, 'value', 'vertices', 'height' are discussed, which are used in the multiple contexts. Then 'sketch', 'mental math', 'zero point oneth place/zero point zero oneth place/zero point zereo zero oneth place', 'number of place', 'natural number part/decimal part' are discussed, which are not used consistently. Finally, middle school mathematics terms 'distance', 'number line', 'the value of the expression' are discussed which are used in elementary school mathematics textbooks/workbooks. From these discussions, the following four suggestions are proposed as conclusions. First, as a mathematical term 'value' and 'distance' should be emphasized. As 'distance' is a middle school term, there is a need to consider the 'height' as 'the length of the line segment' instead of 'distance'. Second, 'number of place' which can be replaced with other suitable term, 'the value of the expression' including 'value of $20{\times}4$', 'natural number part/decimal part', 'vertex of pyramid/vertex of cone', 'mental math' should not be used. Third, there is a need to consider the use of 'mixed decimal' and 'proper decimal'. In addition, there is a need to expand the use of 'sketch'. Fourth, there is a need to consider the confirmation of 'number line' as an elementary school mathematics term. In addition, there is a need to consider to specify that 'decimal first place', 'decimal second place', 'decimal third place' can be used equivalently with 'zero point oneth place', 'zero point zero oneth place', 'zero point zereo zero oneth place' respectively.

• Korean Journal of Food Science and Technology
• /
• v.47 no.3
• /
• pp.293-298
• /
• 2015

This study aimed at characterizing the rheological properties and molecular weight of tara gum fractionated with ammonium sulfate. Tara gum was separated into six fractions (F1-F6) at different concentrations of ammonium sulfate, ranging from 12.21 to 28.67% (w/w). The yield of the tara gum fractions ranged between 4.98 and 17.47%, and their intrinsic viscosity ranged from 9.38 to 12.44 dL/g. The highest values of Huggins coefficient (k') and viscosity-molecular mass were observed in fraction F3. The shear viscosity of the tara gum fractions was measured by a cone-plate viscometer, clearly showing shear thinning behavior. Size-exclusion chromatography results showed that the molecular weight ranged between 635.42 and 776.71 kg/mol, and the F3 fraction exhibited higher values of molecular weight.