• Journal of the Korean Society for Railway
• /
• v.17 no.2
• /
• pp.94-99
• /
• 2014

Recently, trends in new transportation system development have been primarily focused on sustainable and ecofriendly mobility solutions. The personal rapid transit (PRT) system has been considered a promising candidate in this category; its competitiveness is being improved through convergence with cutting-edge electric vehicle (EV) technologies. However, battery-powered vehicles pose difficult technical challenges in attempts to achieve reliable and efficient operation. In this study, a design approach for a solar-power assisted PRT system is presented with small-scale demonstrations aimed at circumventing challenges facing its adoption, as well as helping speed the transition to electric-powered ground transportation. From the results, it is expected that flexible photovoltaic (PV) cells will be able to supply 11% of the power required by the service equipment installed in a prototype vehicle. In particular, flexible photovoltaic (PV) cells are advantageous in terms of cost, weight, and design considerations. Most importantly, the cells' flexibility and attach-ability are expected to give them great potential for extended application in various areas.

• The Journal of Society for e-Business Studies
• /
• v.21 no.3
• /
• pp.15-28
• /
• 2016

This paper proposes a system recommending spatial information what user wants with collecting and analyzing tweets around the user's location by using the GPS information acquired in mobile. This system has built an emotion dictionary and then derive the recommendation score of morphological analyzed tweets to provide not just simple information but recommendation through the emotion analysis information. The system also calculates distance between the recommended tweets and user's latitude-longitude coordinates and the results showed the close order. This paper evaluates the result of the emotion analysis in a total of 10 areas with two keyword 'Restaurants' and 'Performance.' In the result, the number of tweets containing the words positive or negative are 122 of the total 210. In addition, 65 tweets classified as positive or negative by analyzing emotions after a morphological analysis and only 46 tweets contained the meaning of the positive or negative actually. This result shows the system detected tweets containing the emotional element with recall of 38% and performed emotion analysis with precision of 71%.

• Korean Journal of Optics and Photonics
• /
• v.17 no.3
• /
• pp.231-239
• /
• 2006

In recent years, a hierarchical security architecture has been widely studied because it can efficiently protect information by allowing an authorized user access to the level of information. However, the conventional hierarchical decryption methods require several decryption keys for the high level information. In this paper, we propose a hierarchical image encryption using random phase masks and Walsh code having orthogonal characteristics. To decrypt the hierarchical level images by only one decryption key, we combine Walsh code into the hierarchical level system. For encryption process, we first perform a Fourier transform for the multiplication results of the original image and the random phase mask, and then expand the transformed pattern to be the same size and shape of Walsh code. The expanded pattern is finally encrypted by multiplying with the Walsh code image and the binary phase mask. We generate several encryption images as the same encryption process. The reconstruction image is detected on a CCD plane by a despread process and Fourier transform for the multiplication result of encryption image and hierarchical decryption keys which are generated by Walsh code and binary random phase image. Computer simulations demonstrate that the proposed technique can decrypt hierarchical information by using only one level decryption key image and it has a good robustness to the data loss such as random cropping.

• The Journal of Engineering Research
• /
• v.2 no.1
• /
• pp.113-123
• /
• 1997

The purpose of this paper is an optimum design of the shaped Cassegrainian antenna system for the base station. The process of the shaped Cassegrainian antenna design is as follows : 1) the aperture field distribution is determined so as to meet design specifications, 2) a proper design parameter is selected, 3) extracting of the dimension data for the main and sub-reflector antenna To do these, Hansen's distribution is chosen as the aperture field, and the far-field pattern from the aperture is predicted by the angular spectrum. Firstly, the aperture field distribution is designed to satisfy the specification for design frequency, it is confirmed if this distribution meet the specification for another frequency band. The main- and the sub-reflectors are synthesized so as for the given beamwaveguide feed pattern to be transformed into the prescribed aperture distribution. The designed system has circular aperture, left-right symmetry and no tilted structure. The continuous surface functions of reflectors are obtained by adopting the global interpolation technique to the discrete reflector profiles. Jacobi polynomial-sinusoidal is used as the basis function. A Ka-band Cassegrainian antenna operates over 17.7 – 20.2 GHz for down-link band and 27.5 – 30 GHz for up-link band is designed.

• Journal of Korea Water Resources Association
• /
• v.48 no.10
• /
• pp.831-843
• /
• 2015

This study estimates MODIS-derived evapotranspiration data quality by revised RS-PM algorithm in Seolmacheon test basin. We used latent flux with eddy covariance method to evaluate MODIS-derived spatial evapotranspiration and gap-filled these data by three methods (FAO-PM, MDV and Kalman Filter) and to quantify daily evapotranspiration. Gap-filled daily evapotranspiration data was used to evaluate evapotranspiration computed by revised RS-PM algorithm derived MODIS satellite images. For the water budget analysis, we used soil moisture content that is quantified to average individual soil moisture rate observed by TDR (Time Domain Reflectometry) sensor at soil depth. The soil moisture variation is calculated in consideration from initial to final soil moisture content. According to the result of this study, evapotranspiration computed by revised RS-PM algorithm is very larger than eddy covariance data gap-filled by three methods. Also, water budget characteristics is not closed. We could analysis that MODIS-derived spatial evapotranspiration does not represent actual evapotranspiration in Seolmacheon.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.5
• /
• pp.527-534
• /
• 2006

The purpose of this study is the development of more effective filter-type polymer adsorbent for removal of anionic pollutants from wastewater. In order to synthesize the polymer adsorbent that possesses anionic exchangeable function, carboxyl(-COOH) group of PP-g-AA nonwoven fabric was converted into amine($-NH_2$) group by the chemical modification using diethylene triamine(DETA). FT-IR data indicate that amine group was introduced into PP-g-AA through amidation of grafted acrylic acid by reaction with DETA. The degree of amination increased with increase in the reaction time and temperature of the chemical modification process, and was significantly improved by the pre-swelling treatment of PP-g-AA with solvent and addition of metal chlorides as a catalyst in following order as $NH_4OH>MeOH{\geq}HCl{\geq}H_2O\;and\;AlCl_3>FeCl_3{\geq}SnCl_2{\gg}ZnCl_2{\geq}FeCl_2$, respectively. However, the addition of catalyst limited the reusability of DETA, hence was less useful from the viewpoint of cost effectiveness and waste management. The anion exchange capacity of the aminated PP-g-AA(PP-g-AA-Am) increased with increase in the degree of amination, but it reached maximum value at the degree of amination as about $50{\sim}60%$. The anion exchange capacity of PP-g-AA-Am was higher than those of commercial anion resins.

• Korean Journal of Food Science and Technology
• /
• v.28 no.2
• /
• pp.324-329
• /
• 1996

In order to develop a novel dewatering process for soybean milk residue, hydraulic press with ohmic heating was built and its expression conditions were examined. The electric conductivity of raw soybean milk residue was 0.128 S/m and increased linearly with increasing temperature. Water content of the residue could be reduced to 74% with the conventional hydraulic press, but to less than 70% by applying ohmic heating to the hydraulic press. The most effective dewatering was achieved by applying alternative current with 5 kHz frequency at 60 V during expression. The solid content of the expressed liauid was markedly reduced from 10% to 3.3% by ohmic heating during expression. Temperature of the cake rose to above $95^{\circ}C$ during the dewatering due to ohmic heating.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.2
• /
• pp.509-514
• /
• 2020

The conventional TTS system consists of several modules, including text preprocessing, parsing analysis, grapheme-to-phoneme conversion, boundary analysis, prosody control, acoustic feature generation by acoustic model, and synthesized speech generation. But TTS system with deep learning is composed of Text2Mel process that generates spectrogram from text, and vocoder that synthesizes speech signals from spectrogram. In this paper, for the optimal Korean TTS system construction we apply Tacotron2 to Tex2Mel process, and as a vocoder we introduce the methods such as WaveNet, WaveRNN, and WaveGlow, and implement them to verify and compare their performance. Experimental results show that WaveNet has the highest MOS and the trained model is hundreds of megabytes in size, but the synthesis time is about 50 times the real time. WaveRNN shows MOS performance similar to that of WaveNet and the model size is several tens of megabytes, but this method also cannot be processed in real time. WaveGlow can handle real-time processing, but the model is several GB in size and MOS is the worst of the three vocoders. From the results of this study, the reference criteria for selecting the appropriate method according to the hardware environment in the field of applying the TTS system are presented in this paper.

• Journal of the Microelectronics and Packaging Society
• /
• v.14 no.1
• /
• pp.49-53
• /
• 2007

The direct methanol fuel cell (DMFC) is a promising power source for portable applications due to many advantages such as simple construction, compact design, high energy density, and relatively high energy-conversion efficiency. In this work, an electrochemical methanol sensor for monitoring the methanol concentration in direct methanol fuel cells was fabricated using a thin composite nafion membrane as the electrolyte. We have analyzed the I-V characteristic of the fabricated methanol sensor as a function of methanol concentration, catalyst electrode and platinum(Pt) thickness. The fabricated sensor was analyzed by I-V measurement with various methanol concentration. When we measured the sensor characteristics with 10nm Pt and at 1V, the current value was $1.30{\times}10^{-6}A,\;1.96{\times}10^{-6}A\;and\;2.80{\times}10^{-6} A$ for three methanol concentration of 1M, 2M and 3M, respectively. When the methanol concentration was fixed at 2M, the current value of the fabricated device with Pt layers of 5, 10 and 15 nm thickness was $3.06{\times}10^{-6}A,\;1.96{\times}10^{-6}A\;and\;1.00{\times}10^{-6}A$, respectively. These results lead us to the conclusion that when the methanol concentration increases, the output current increases and when the catalyst electrode become thinner, the current increase more. It showed that, the thinner the catalyst electrode, the more electrochemistry become activation.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.4
• /
• pp.24-35
• /
• 2011

This paper demonstrates a methodology of integrated operation and management system for intermodal connectivity center (ICC), which is planning to be build up as a large scale public transit facilities for green growth strategy by the national government. The ICC needs to be capable of providing the integrated location based information for the public transit users in terms of collaborating a variety of transit modes and complex facility in a large scale center. Recently, the upcoming information and communication technologies enable to come up with real time information provision on nomadic and portable devices, i.e. smart phones and/or tablet PCs, as what the users actually need to get on demand. In order to provide the public transit users in ICC with the integrated information on their smart phones for example, the integrated operation and management system plays a key role to collect the data utilizing the wireless communication with real time location tracking and to manage them to be effective and operational sources for applicable personalized services. Thus, this paper defines a type of services, subsystems, and relevant technologies for the system integration so called a "Smart Garatagi Service" and shows a filed test demonstration case in the existing airport terminal, Gimpo Domestic.