• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.365-372
• /
• 1997

이 연구의 목적은 밀도측정 및 수분함량측정용 RI 계기의 개발에 있다. 방사성동위원소를 이용하여 성토시공의 현장다짐 밀도 및 수분함량 측정에 이용되곤 있는 RI 계기는 중성자 검출부분, 감마선 검출부분, 고전압 공급부분, 마이크로 컴퓨터 부분으로 크게 나눌 수 있다. 감마선을 검출하는 G-M 검출기는 그 특징으로 인해 방사선검출 전기회로가 간단하다. 그러나 열중성자를 검출하는 He-3 검출기는 검출기에서 발생하는 신호원이 매우 작아서 검출회로의 상호 간섭으로 인한 전기적 잡음이 발생한다 이 잡음을 제거하는 것이 He-3 중성자 검출기로 열중성자를 검출하는데 중요한 문제이다. 본 연구에서 제작하는 RI 계기는 원자력법에서 제한하는 방사능 이하를 (100$\mu$Ci 의 밀봉선원) 사용하므로 종래의 RI 계기에 비해 방사선의 검출수가 줄어든다. 이에 따라 검출기의 개수를 늘려서 방사선을 검출해야 한다. 또한 본 연구에서는 He-3검출기의 검출 스펙트럼을 분석하여 적정한 방사선 검출 측정영역을 결정하였다.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.11a
• /
• pp.248.2-248.2
• /
• 2004

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.2
• /
• pp.60.4-61
• /
• 2021

차세대 중력파 검출기들이 1.5 ㎛ 이상의 장파장에서의 양자광원을 필요로 함에 따라, 이에 대한 기술 개발의 중요성이 대두되고 있다. 차세대 검출기들은 기존의 검출기에 사용되는 test mass를 fused silica에서 silicon으로 변경하면서 열팽창 현상으로 인해 생기는 정밀도의 한계를 뛰어넘으려한다. 하지만 1064 nm 파장의 경우 silicon에서 흡수율이 매우 높으므로 사용할 수 없기에, 흡수율이 상대적으로 낮은 1.5 ㎛ 이상의 영역의 양자광원이 필요하다. 본 발표에서는 1550 nm 파장에서 압축광 개발에 필요한 기술들을 소개하고, 현재까지 진행된 실험 및 실험결과 들을 보고하고자 한다. 압축광의 pump빔을 만드는 SHG, 압축광이 생성되는 OPO, 생성된 압축광의 quadrature를 측정하기 위한 호모다인 측정기, 빛의 분광 잡음을 줄이고, 원하는 spatial mode로 여과시켜주는 mode cleaning cavity에 대한 내용을 설명한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.11a
• /
• pp.741-744
• /
• 2023

장면 전환 검출에서 단일 특성을 사용하는 경우 발생 가능한 정확도 감소의 문제를 해결하기 위해 색상 히스토그램 분포 차 분석과 특징점 추출 알고리즘을 활용한 방법을 제안한다.

• Journal of Satellite, Information and Communications
• /
• v.11 no.3
• /
• pp.119-122
• /
• 2016

Feature detection is recognized as an accurate spectrum sensing approach when the information of the desired signal is partly known at the receiver. This type of detection was proposed to overcome large noise environment. Cyclostationary detection is an example of feature detection in spectrum sensing technique in cognitive radio. However, the cyclostationary process calculation requires a lot of processing time and information about the designed signals. On the other hand, energy detection spectrum sensing is widely known as a simple and compact spectrum sensing technique. However, energy detection is highly affected by large noise and lead to high detection error probability. In this paper, the combination of energy detection and cyclostationary is proposed in order to increase the accuracy and decrease the calculation and processing time. The two-layer threshold is utilized in order to reduce the complexity of computation and processing time in cyclostationary which can lead to the improved throughput of the system. The simulation result shows that the implementation of energy-based cyclostationary detector can help to improve the performance of the system while it can considerably reduce the required time for signal detection.

• Journal of KIISE:Software and Applications
• /
• v.36 no.11
• /
• pp.912-919
• /
• 2009

A novel algorithm using 2D tensor voting and edge-based approach is proposed for text detection in natural scene images. The tensor voting is used based on the fact that characters in a text line are usually close together on a smooth curve and therefore the tokens corresponding to centers of these characters have high curve saliency values. First, a suitable edge-based method is used to find all possible text regions. Since the false positive rate of text detection result generated from the edge-based method is high, 2D tensor voting is applied to remove false positives and find only text regions. The experimental results show that our method successfully detects text regions in many complex natural scene images.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.5
• /
• pp.460-468
• /
• 2023

Developmental Dysplasia of the Hip (DDH) is a pathological condition commonly occurring during the growth phase of infants. It acts as one of the factors that can disrupt an infant's growth and trigger potential complications. Therefore, it is critically important to detect and treat this condition early. The traditional diagnostic methods for DDH involve palpation techniques and diagnosis methods based on the detection of keypoints in the hip joint using X-ray or ultrasound imaging. However, there exist limitations in objectivity and productivity during keypoint detection in the hip joint. This study proposes a deep learning model-based keypoint detection method using X-ray and ultrasound imaging and analyzes the performance of keypoint detection using various deep learning models. Additionally, the study introduces and evaluates various data augmentation techniques to compensate the lack of medical data. This research demonstrated the highest keypoint detection performance when applying the residual network 152 (ResNet152) model with simple & complex augmentation techniques, with average Object Keypoint Similarity (OKS) of approximately 95.33 % and 81.21 % in X-ray and ultrasound images, respectively. These results demonstrate that the application of deep learning models to ultrasound and X-ray images to detect the keypoints in the hip joint could enhance the objectivity and productivity in DDH diagnosis.

• Tunnel and Underground Space
• /
• v.26 no.1
• /
• pp.46-58
• /
• 2016

In this study, a LIDAR laser scanner was used to scan a rock slope around Mt. Gwanak and to produce point cloud from which directional information of rock joint surfaces shall be extracted. It was analyzed using two different algorithms, i.e. Ball Pivoting and Wrap algorithm, and four sampling intervals, i.e. raw, 2, 5, and 10 cm. The results of Fuzzy K-mean clustering were analyzed on the stereonet. As a result, the Ball Pivoting and Wrap algorithms were considered suitable for extraction of rock surface orientation. In the case of 5 cm sampling interval, both triangulation algorithms extracted the most number of the patch and patched area.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.5
• /
• pp.98-107
• /
• 2021

During the sea trial test for the aerovane in AOE-II, a malfunction occurred in the wind detector movement around 40 to 90° on the starboard side and around 270 to 320° on the port side. The purpose of this study was to analyze and improve the cause of the above phenomenon. The wind detector was covered with a mast structure and was not affected directly by the blowing wind, and a vortex air current was formed behind the mast structure, causing the motion malfunction. The above problem was solved by moving and installing the wind detector on the newly installed mast yard. After conducting vibration analysis and reviewing the effects of vibration, the wind detector was installed in the new mast yard and verified by a sea trial test. Since the improvement plan was slightly effective, the position of the wind detector moved away from the mast on the new mast yard and was re-verified through a sea trial test. The movement malfunction of the wind detector did not occur, confirming that it is an appropriate improvement plan.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.149-152
• /
• 2000

음성신호처리분야에서 피치시점 검출은 음성 합성시에 여기원의 특성을 나타내어 음질의 자연성을 결정한다. 이에 본 논문에서는 음색 변경시에 운율조절에 필요한 피치시점 검출법을 제안한다. 제안한 방법은 시간영역에서 직접 처리하기 때문에 피치동기분석이 용이하고 다른 영역으로의 변환과정이 불필요하다. 또한 기존의 피치시점검출 방법에서는 결정논리를 실험적인 문턱 값이나 무게치를 적용하여 처리하는 반면에 제안한 방법은 분석구간별로 얻어지는 주기적인 성문특성을 적용하여서 정확한 피치시점을 검출할 수 있었다