• Journal of the Korea Convergence Society
• /
• v.10 no.8
• /
• pp.145-151
• /
• 2019

In this study, the effects were analyzed by applying the vibration absorption liner into the guide rail bracket as a part of method to reduce the vibration and noise on the high-rise apartment. As the result of vibration absorption liner performance, it was checked that the level of vibration and noise was reduced around 65.49% in the car side and around 90.05% in the counterweight side. Therefore, the vibration absorption effect by the vibration absorption liner of elevator guide rail bracket became fairly good. In case of the vibration absorption liner application, there was an effect on the reduction of 7.26 to 22.22% at hoistway section area, 3,840,000 to 9,780000 KRW at the cost of material and installation by comparing with the damping beam application. Also, in case of the vibration absorption liner application with light weight instead of damping beam with heavy weight, it was thought to become significant effect at preventing the safety from the accidents on installation site.

• Journal of Platform Technology
• /
• v.9 no.4
• /
• pp.90-96
• /
• 2021

Most of the vehicles currently under development and in operation are equipped with various IoT sensors, but some of the factors that cause car accidents are relatively difficult to detect. One of the major risk factors among these factors is black ice. Black ice is one of the factors most likely to cause major accidents, as it can affect all vehicles passing through areas covered with black ice. Therefore, black ice detection technique is essential to prevent major accidents. For this purpose, some studies have been carried out in the past, but unrealistic factors have been reflected in some parts, so research to supplement this is needed. In this paper, we tried to detect black ice by analyzing color images using the CNN technique, and we succeeded in detecting black ice to a certain level. However, there were differences from previous studies, and the reason was analyzed.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.4
• /
• pp.367-373
• /
• 2022

VANET (Vehicular Ad hoc NETwork) is one of the special cases of the ad hoc networks in which car nodes communicate with each other and/or with RSUs (Road Side Unit) in order for the drivers to receive nearby road traffic information as well as for the passengers to retrieve nearby gas price or hotel information. In case of constructing VANET over CCN, users do not need to specify a destination server address rather to input a key word such as nearby congestion in order to gather surrounding traffic congestion information. Furthermore, each car node caches its retrieved data for forwarding other nodes when requested. In addition, the data transmission is inherently multicast, which implies fast data propagation to the participating car nodes. This paper measures and evaluates the data transmission performance of the VCCN (VANET over CCN) in which nodes are equipped with diverse wireless communication channels. The simulation result indicates that 802.11a shows the best performance of the data transmission against other wireless channels. Moreover, it indicates that VCCN improves overall data transmission and provides benefit to the nodes that request the same traffic information by exploiting inherent multicast communication.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.6
• /
• pp.571-577
• /
• 2021

This study is a study on System On Chip (SOC) that implements virtual engine sound in electric vehicles without engines, and realizes vivid engine sound by combining Adaptive Difference PCM (ADPCM) method and frequency modulation method for satisfaction of driver's needs and safety of pedestrians. In addition, by proposing an electronic sound synthesis algorithm applying Musical Instrument Didital Interface (MIDI), an engine sound synthesis method and a constitutive model of an engine sound generation system are presented. In order to satisfy both drivers and pedestrians, this study uses Controller Area Network (CAN) communication to receive information such as Revolution Per Minute (RPM), vehicle speed, accelerator pedal depressed amount, torque, etc., transmitted according to the driver's driving habits, and then modulates the frequency according to the appropriate preset parameters We implemented an interaction algorithm that accurately reflects the intention of the system and driver by using interpolation for the system, ADPCM algorithm for reducing the amount of information, and MIDI format information for making engine sound easier.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.1
• /
• pp.291-310
• /
• 2023

This study explores the factors which affect user acceptance for Robo Taxi, an electricity-based Autonomous Vehicles based on a Value based Adoption Model. The three main factors of benefit (usefulness and enjoyment), sacrifice (technicality and perceived fee level), and user experience about mobility services such as car sharing, taxi, and autonomous vehicles, were finally selected as independent variables as a influential factors on perceived values and adoption intention of Robo taxi. The study found that usefulness, enjoyment, and perceived fee had a significant effects on adoption intention, and some user experiences had a significant effect on benefit factors. This study has important implications for incorporating the Value-based Adoption Model results into the service design for the activation of Robo taxi, and furthermore, they can provide a theoretical basis for effective use of the research findings.

• Proceedings of the KOR-KST Conference
• /
• 1996.02a
• /
• pp.29-58
• /
• 1996

현재 서울은 교통사고문제, 교통혼잡문제와 자동차로부터 배출되는 유해가스에 의한 대기환경오염문제를 갖고 있다. 본 논문의 목적은 대기환경오염을 악화시키는 자동차의 주된 배출오염가스인 일산화탄소, 탄화수소 및 질소화합물량을 교차로 교통량을 중심으로 어떻게 계산하는가에 있다. 연구의 대상지역은 서울시의 송파구 교차로들과 도심지역의 링크들을 선택하였다. 그리고 교통량, 지체시간, 링크길이, 정지회수, 운행속도, 주행속도 등을 고려하여, 제작차 배출가스 허용기준, 총량기준, 불량차 기준, 속도기준 등에 의한 계수산정 및 TRAF-NETSIM에 의한 시뮬레이션을 통하여 일정 도로상의 제한된 범위내의 배출량 산출을 시도하였다. 본 연구의 결과에 의하면 첫째, 어느 방법이든 실제배출량의 정확한 값을 표현 할 수는 없는 것이고, 단지 상대적인 비교에 의하면 배출가스량의 수준을 추정 할 수 있었다. 또한, 시뮬레이션 배출율표를 우리 현실에 맞는 자료에 의해 수정할 수 있다면, 그 결과는 실제량에 보다 근접할 수 있을 것이다. 둘째, 서울도로의 현재 혼잡상태에서 속도의 저감에 배출량이 민감한 반응을 보이고 있다는 사실이다. 셋째, 교통량변화에 따른 배출량의 변화가 일산화탄소에서 가장 심하게 나타남을 알 수 있었고, 신호운영상의 옵셋값이 잘못 설정되면 탄화수소는 35%, 일산화탄소는 40%, 질소산화물은 75%까지 초과발생할 수 있으며, 유해배출가스량을 최소화시키는 측면에서의 신호최적화를 위해서는 현재의 Stop Penalty는 상향 조정되어야 함이 밝혀졌다. 앞으로는 자동차로 인한 대기환경오염 농도의 저감을 위해서는 도로별 자동차 유해가스 배출 총량규제 방안도 고려해 볼 가치가 있으며, 이를 위해 환경공학과 교통공학의 다학제적 공동연구가 지속적으로 필요하며 교통정책에 반영되어야 할 것이다.분석, 리용수 학모형대이십일세기상해항공운량진행예측, 제출발전상해항공운수적전 략목표급발전중점. 예측2020년 상해항공항총객운탄토량4300만인/년, 화운량달120만돈; 2050년객운량장달18150만인차/년, 화운량518만돈. 사, 발전상해민항기출경제정책, 제출위료$\ll$진흥상해, 개발포동, 복무전국, 면향세계$\gg$ 화도이십일세기중기국민경제달도중등발달국가수 평굉관전략목표적실현, 제료필수재지도사상상파교통운수진정방도전략 산업지위, 환응재관리체제상채취과단유효적개혁조시, 재기출경제정책 상급여대력부지. 오, 전략목표, 위파상해건설성위태평양서안최대적경제, 김융, 무역적중심, 요구상해항공항성위화동지구통향세계각지항선망출발참, 구성대외개방선면축심, 실현국제항선적함접화국내항반적전항, 형성다축심복사식항선망; 가강기장건설, 개피포동제이국제기장건설, 괄응포동개발경제발전적수요. 부화개시일은 각 5월 26일과 5월 22일이었다. 11. 6월 중순에 애벌레를 대상으로 처리한 Phenthoate EC가 96.38%의 방제가로 약효가 가장 우수하였고 3월중순 및 4월중순 월동후 암컷을 대상으로 처리한 Machine oil, Phenthoate EC 및 Trichlorfon WP는 비교적 약효가 낮았다.>$^{\circ}$E/$\leq$30$^{\circ}$NW 단열군이 연구지역 내에서 지하수 유동성이 가장 높은 단열군으로 추정된다. 이러한 사실은 3개 시추공을 대상으로 실시한 시추공 내 물리검층과 정압주입시험에서도 확인된다.. It was resulted from increase of weight of single cocoon. "Manta"2.5ppm produced 22.2kg of cocoon. It is equal to 9% increase i

• Journal of the Korean Institute of Gas
• /
• v.19 no.1
• /
• pp.6-11
• /
• 2015

This paper is to study the examples for rubber damage and weaken reliability of timing belt, constant velocity joint boot and weather strip in vehicle. The first example, when the service man replaced the new timing-belt of rubber material, he assembled the belt that was weaken it's contact surface because of material transform. He knew the abnormally tearing failure by friction action between belt and sprocket. The second example, it certified the fact that the grease is leaked out boot protecting of constant velocity joint by split of rubber surface because of durability badness. The third example, the weather stripe took the minutely tearing because of damage produced the material transform by crack of chemistry change. It certified the production phenomenon of a tiny noise by coming with outside air because of overlapped the rubber of weather stripe when driving after closing the door. Therefore, the driver must always manage the rubber system part of vehicle.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.3
• /
• pp.417-425
• /
• 2022

Interest in micro cars is growing around the world, and policy support for micro cars has been increasing in Korea. It is important to meet minimum safety standards for the operation of micro cars on roads due to concerns around micro car safety and the limited driving range of micro cars. In this study, visibility experiments that included safety identification of micro cars were conducted to try and prevent a decrease in driver reaction time. Safety identification lights were installed to the rear of a micro car, and the visibility and discomfort of the vehicle were evaluated to determine whether the micro car was safe to drive on an expressway. As a result, the installation effect of Micro car which install safety identification lamp was found when joining the point at an acceleration lane of the grade separation intersection, and that light on/off could be effective when entering an expressway. If the micro car operation plan proposed in this study is applied, the safety of micro cars on expressways can be increased by improving the visibility of micro car.

• Journal of Appropriate Technology
• /
• v.7 no.2
• /
• pp.127-135
• /
• 2021

To respond to the threat of global warming, countries around the world are promoting the spread of renewable energy and reduction of carbon emissions. In accordance with the United Nation's Sustainable Development Goal to combat climate change and its impacts, global automakers are pushing for a full transition to electric vehicles within the next 10 years. Electric vehicles can be a useful means for reducing carbon emissions, but in order to reduce carbon generated in the stage of producing electricity for charging, a power generation system using eco-friendly renewable energy is required. In this study, we propose a smart electric mobility operating system integrated with off-grid solar power plants established in Tanzania, Africa. By applying smart monitoring and communication functions based on Arduino-based computing devices, information such as remaining battery capacity, battery status, location, speed, altitude, and road conditions of an electric vehicle or electric motorcycle is monitored. In addition, we present a scenario that communicates with the surrounding independent solar power plant infrastructure to predict the drivable distance and optimize the charging schedule and route to the destination. The feasibility of the proposed system was verified through test runs of electric motorcycles. In considering local environmental characteristics in Tanzania for the operation of the electric mobility system, factors such as eco-friendliness, economic feasibility, ease of operation, and compatibility should be weighed. The smart electric mobility operating system proposed in this study can be an important basis for implementing the SDGs' climate change response.

• Journal of the Korean Professional Engineers Association
• /
• v.28 no.4
• /
• pp.54-75
• /
• 1995

This synthesis has been prepared from a review of literature on Truck Escape Ramps technology and a survey of current practice by state department of transportation. Their locations have been determined usually from a combination of accident experience and en-gineering judgement, but new tools are emerging that can identify needs and sites without waiting for catastrophic accidents to happen. The Grade Severity Rating Systems holds promise in this regard. Design Procedures for truck excape ramps continue to evolve. Gravel arrester beds are clearly the preferred choice across the country Rounded aggregate, uniformly graded in the approximate size range of 13 to 18mm. Tech-nical publications typically have dassified TER types as paved gravity, sandpile, and ar-rester bed ramps. The design speed for vehicle entry into the ramp in critical to the deter-mination of ramp length. An escape ramp should be designed for a minimum entry speed of 130km/hr, a 145km/hr design being preferred. The ramps should be straight and their angle to the roadway align-ment should be as possible. The grade of truck escape ramps show the adjustment of ramp design to local topography, such as the tradeoff of ramp length against earthwork requirements. A width of 9 to 12m would more safety acommodate two or more outof con-trol vehicles. Reguarding comments on the most effective material, most respondents cited their own specification or referred to single graded, rounded pea gravel. The consensus essentially Is that single graded, well -rounded gravel is the most desirable material for use in arrester beds. The arrester beds should be constructed with a minimum aggregate depth of 30cm. Successful ramps have used depths between 30 and 90cm.