• Korean Chemical Engineering Research
• /
• v.50 no.1
• /
• pp.149-154
• /
• 2012

The adsorption and desorption behavior of biofilter-medium was investigated on the performance of an adsorption column. Continuous flow-isothermal adsorption experiments were performed to treat waste air containing such a VOC as ethanol under the same condition of > 90% relative humidity as the condition of the feed to a biofilter process. In case of feeding waste air containing ethanol of 1,000 ppmv (or 2,050 mg ethanol/$m^3$) to the adsorption system at the rate of 2 L/min, the onsets of its breakthrough and reaching the state of dynamic equilibrium at the exit had been delayed 10 and 3 times, respectively, later than those at the 1st stage sampling port. Moreover, in case of 2,000 ppmv (or 4,100 mg ethanol/$m^3$), they had been delayed 9 and 3 times, respectively. Thus, regardless of feeding concentration, the ratios of delaying period were observed to be quite consistent each other at the exit of the adsorption column. With regard to the period of desorption, the ratios of delaying period were consistent each other to be 1.5 for both cases. In addition, the effect of microbial activity and sterilization-process was studied on adsorption equilibrium. The ethanol concentration in the vapor phase of vials packed with sterilized granular activated carbon (GAC) was quite consistent to that with unsterilized GAC. However, the ethanol concentrations in the vapor phase of vials packed with unsterilized compost and the unsterilized mixture of GAC and compost were higher than those with sterilized compost and the sterilized mixture of GAC and compost, respectively.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.3
• /
• pp.276-285
• /
• 2006

When polluted stream water was treated with biological aerated filter(BAF) in pilot plant, all operation with 90, 60, 45 and 30 min of EBCT at fixed $0.1m^3air/m^2min$ of aeration showed 80% or higher treatment efficiency of particle materials(SS, turbidity and Chl.-a) and 85% or higher efficiency of ammonia nitrogen removal. It was thought that, in case of BOD, biological stability may sufficiently be assured with BAF because grade III or IV inflow water was changed to grade I for outflow water. In case of $COD_{Mn}$, about 60% of removal efficiency was found. When the mechanism of the result was investigated, about 30% of COD materials was produced by algae clogged in the reactor. There was almost no biological decomposition because specific substrate utilization rate of algogenic organic materials were $0.0245mg{\cdot}COD_{Mn}/mg{\cdot}VSS{\cdot}day$, thus partial backwashing(washing the media in 1 m upper of the reactor once a day) was required. It is thought that elevation of removal rate about 10% of $COD_{Mn}$ and 5.5% of $BOD_5$ could be obtained with partial backwashing resulting in assurance of biologically more stable raw water and that saving backwashing water may be significant.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.9
• /
• pp.851-856
• /
• 2010

A sulfur utilizing nitrite denitrification process could be placed after the shortcut biological nitrogen removal (SBNR) process. In this study, removal of nitrite using sulfur oxidizing denitrifier was characterized in batch tests with granular elemental sulfur as an electron donor and nitrite as an electro acceptor. At sufficient alkalinity, initial nitrite nitrogen concentration of 100 mg/L was almost completely reduced in the batch reactor within a incubation time of 22 h. Sulfate production with nitrite was 4.8 g ${SO_4}^{2-}/g$ ${NO_2}^-$-N, while with nitrate 13.5 g ${SO_4}^{2-}/g$ ${NO_3}^-$-N. Under the conditions of low alkalinity, nitrite removal was over 95% but 15 h of a lag phase was shown. For nitrate with low alkalinity, no denitrification occurred. Sulfate production was 2.6 g ${SO_4}^{2-}/g$ ${NO_2}^-$-N and alkalinity consumption was 1.2 g $CaCO_3/g$ ${NO_2}^-$. The concentration range of organics used in this experiment did not inhibit autotrophic denitrification at both low and high alkalinity. This kind of method may solve the problems of autotrophic nitrate denitrification, i.e. high sulfate production and alkalinity deficiency, to some extent.

• Journal of the Korean Society for Railway
• /
• v.20 no.4
• /
• pp.458-465
• /
• 2017

The railway signaling system, which controls the course of trains and the distance between trains, is a safety critical system of the railway system because derailment or collision of trains can occur if unsafe failure is generated by any fault. The international standards of reliability, availability, maintainability, and safety of railway applications require that the safety of functions be guaranteed in safety critical systems; system reliability and safety are quantitatively estimated and demonstrated by the failure rates of devices. The development of technology has accelerated the development of railway signaling systems. Existing devices, which have already been verified as to their safety, are applied with special user requirements to reflect the new operation scenario. It is found that the reliability and safety of the devices are different depending on individual application. Therefore, the reliability of the railway signaling system must be considered while complying with the international standards; this requires that the initial failure rate be estimated and demonstrated using fault data gathered over several years. This paper shows a method for demonstrating the initial estimated failure rate and suggests a fault data collection method and an overall process that is based on probability.

• Journal of the KSME
• /
• v.29 no.6
• /
• pp.573-580
• /
• 1989

현재 한국의 자동차 공업은 80년대 초반부터 급격한 발전으로 세계의 다른 자동차 생산국으로부 터 경계의 대상이 되고 있다. 그러나 그 내면을 살펴보면 아직도 중요한 기술은 거의 대부분 일 본이나 독일, 미국 등 자동차 선진국의 기술에 의존하고 있으며 특히 엔진 분야는 대부분 외국 기술에 의존하고 있다고 해도 과언이 아니다. 엔진은 자동차 생산원가의 약 30%를 차지하며 자동차의 성능을 좌우하는 경우 기술료 지급은 물론이며 부품구매 선택의 여지가 없어진다. 또한 요즈음과 같이 상품의 수명주기가 짧게 되어 가는 추세 하에서는 시장의 요구에 대처해나가는 엔지니어링 적응력이 부족하게 되면 결국 경쟁성을 상실하게 된다. 그러나 이러한 문제점을 인 식하면서도 80년대 초까지 독자적인 엔진개발을 하지 못했던 원인은 크게 2가지로 분석할 수 있다. 첫째는 한국의 자동차 회사들의 기술 축적의 미약과 둘째는 독자개발의 낮은 투자효율성 이다. 즉 엔진과 변속기를 기술 도입할 때 기술료 지급은 자동차 생산댓수당 5-6만원에 달하지만 엔진과 변속기를 독자개발시의 투자비는 약 300-500억원에 달하므로 간단한 산술적 계산으로는 모델당 100만대를 생산하여야만 투자의 가치가 있는 것으로 보여진다. 물론 위에서 언급한 바와 같은 여러 가지 요인에 의하면 이 숫자보다 훨씬 적은 생산량으로도 경쟁성이 확보될 것으로 예상된다. 이제 한국의 자동차 생산량도 연간 백만 대를 상회하는 수준이며 앞으로도 급격한 양과 질적인 팽창이 기대되고 있는 시점에 자동차 메이커들은 각사 모두 독자적인 고유 엔진 개발을 착수하였으며 일부 회사는 이미 성공을 거두어 양산 준비를 하고 있는 것으로 알고 있다. 그러나 아직도 엔진의 설계부터 양산까지 걸리는 기간이 타 선진 메이커에 비하면 상당히 길며 이로 인해 신제품의 경쟁력 저하가 우려되고 있는 상태이다. 이러한 문제점 해결에 도움을 주기 위해서 학계는 기업체의 기술 개발방향과 전략을 이해하는 것이 필요하다.grightarrow$cn-semistratifiable over$\longrightarrow$semistratifiable over $\alpha$ 2, 어떤 공간이 cn-Semistratifiable over $\alpha$이기 위한 필요충분 조건은 그것이 linearly cushioned cn-pairnet를 갖는 것이다. 3. cn-semistratifiable over $\alpha$의 부분공간 역시 cn-semistratifiabie over $\alpha$ 하다. 4. on-semistratifiable over $\alpha$의 유한개의 적공간 역시 cn-semistratifiabie over $\alpha$한다. 5. 폐 cn-semistratifiable over $\alpha$ 부분공간들의 합공간 역시 on-semistrbtifiable over $\alpha$ 하다. 6. 폐연속 net-cevering 함수에 의하여 cn-semistratifiable over $\alpha$ 성질이 보존된다. 보잘것이 없었고, 현재에도 각 시도별 또는 대학주관의 경시대회가 있으나 거국적인 호응을 받지 못했다. 물론 국제 대회에 참석시키는 것은 엄두도 내지 않았다.로 나타났다. 4. 코코넛과 소나무수피의 경우 암모니아 가스에 대한 흡착 능력은 거의 비슷한 것으로 사료되며, 코코넛의 경우 전량을 수입에 의존하고 있다는 점에서 국내 조달이 용이하며, 구입 비용도 적게 소요되는 소나무수피를 사용하는 것이 경제적이라고 사료된다. 5. 마지막으로 악취제거 미생물균주를 접종한 소나무수피 50%와 펄라이트 30%의 혼합재료를 24시간 동안 장기간 운전 실험을 수행한 결과 암모니아 99.06%, 황화수소 96.61%의 제거

• Journal of Energy Engineering
• /
• v.16 no.4
• /
• pp.155-163
• /
• 2007

To insure nuclear reactor safety, the reactivity of control rods should be calculated by measuring the criticality of reactor core and it is regularly performed during the annual physics test period. Also, the core criticality should be monitored during the start-up operation to avoid reactivity induced accidents. Many research works on control rod reactivity measurement and subcriticality measurement have been accomplished throughout the world for decades and recently a new method named "Modified Neutron Source Multiplication Method (MNSM)" was proposed in Japan which is known to be improved overcoming limitations of traditional Neutron Source Multiplication Method (NSM). In this study, MNSM was tested in calculation of subcriticalities and in evaluation of application validity using the educational reactor in Kyung Hee University, AGN-201. For this study, a revised nuclear data library and a neutron transport code system TRANSX - PARTISN were established. Correction factors for various control rod positions were produced using the k-effective values and the corresponding flux distributions and adjoint flux distributions. Experimental values of the core criticality were obtained using the neutron count rates of the BF3 proportional counters. The results showed that the expected reactivity worth of control rods by MNSM agreed well with the theoretical values and the correction factors contributed much for this purpose.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.3
• /
• pp.193-202
• /
• 2009

This study was conducted to identify the magnitude of first flush in small city urban area and to provide the basic information on the criteria of stormwater runoff management. Monitoring site was surrounded by residential area in Gumi city near to national industrial complex and the monitoring period was three months. Total watershed area was 24.9 ha, where 80% of the area is impervious (asphalt of pavement type). Periodic monitoring of conventional water quality parameters were conducted with six times of rainfall period. Event mean and site mean concentrations for all the parameters were calculated based on the analytical results. Particle size distribution was 9.82 ${\mu}m$ for $D_{0.1}$, 38.99 ${\mu}m$ for $D_{0.5}$ and 159.61 ${\mu}m$ for $D_{0.9}$ respectively. First flush phenomenon was detected highly in particulate solids than dissolved ones. The first flush criteria results by mass first flush contained between 44.4% to 58.5% pollutant mass during the first 30% of runoff volume. Mass first flush ratio and particle size distribution obtained in this study are expected to provide the basic information for the design and operation of non-point source treatment facility.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.10
• /
• pp.730-736
• /
• 2013

This study was conducted to examine the effects of the salt concentration in seafood wastewater on the high-rate anaerobic digestion process. In the general high-rate anaerobic process test, the TCODcr removal efficiency at 6 hr or more HRT was 81.1~0.7%, and the optimal HRT for seafood wastewater process was found to be 6 hr or more. The methane content in the biogas was 70.1~76.8% during the operation, and was hardly affected by the change in the influent load. The results of the anaerobic digestion efficiency according to the salt concentration showed that the removal efficiency of TCODcr was 83.4~89.2% below a $4,000mgCl^-/L$ salt concentration, and mid-70% at a $5,000mgCl^-/L$ salt concentration. Therefore, the salt concentration had to be kept below $4,000mgCl^-/L$ to ensure stable treatment efficiency. Below a $3,000mgCl^-/L$ salt concentration, the methane generation was 0.2999~0.346$m^3CH_4/kgCODrem.$, which was similar to the theoretical methane gas generation in STP condition ($0.35m^3CH_4/gTCODrem.$). The methane content in the biogas was 64.7~73.3% below a $3,000mgCl^-/L$ salt concentration, but decreased with an increase in the salt concentration, to 50.1~56.9% at a $4,000mgCl^-/L$ concentration.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.4
• /
• pp.861-866
• /
• 2007

This study was conducted to investigate an aeration tank with RBC process attached Bacillus sp. known as a suitable microorganism for the removing of organic carbon, nitrogen and phosphorus. An aeration tank was based on tapered aeration because Bacillus sp. was well grown in this like environment conditions. The biofilm process with Bacillus sp. as an advanced treatment process could be a best technology for the prominent removal of organic carbon, nitrogen and phosphorus if the mechanism in the process is verified. The operation conditions of DO in the tapered aeration tank were maintained as $1.2{\sim}1.5mg/L$ in aeration tank1, as $0.3{\sim}0.5mg/L$ in aeration tank 2 and less than 0.2 mg/L in aeration tank 3, respectively. Lab-scale experiments were conducted, at room temperature, internal recycle rate was from 200% to 50% and returned sludge rate was from 100% to 50%. As a result, concentration of organic carbons, nitrogen and phosphorus in Period 1 (the time of Bacillus sp. adapted to environment) were decreased gradually. Ultimately, each removal rate in this biological experiment were TCODCr 94%, BOD 87%, T-N 85%, T-P 89% in Period 2. Hence, this process showed an excellent performance of the removal of organic carbon, nitrogen and phosphorus and this is an effective system fur treating of wastewater.

• Membrane Journal
• /
• v.8 no.2
• /
• pp.77-85
• /
• 1998

To treat effectively EDIR (electrodeposition ion removal) wastewater in terms of CO$_{Mn}$ 1,500~2,000 ppm generated from aluminum painting process, a RO (reverse osmosis) process was designed and installed to recover and reuse the concentrated solvent sent back to the electrocodeposition tank while the permeate reused as rinse water. A RO system in which three polyamide-spiral wound modules ($102\Phi \times 1,016L$ mm) connnected in series had been running to treat 20 m$^3$ in waste volume in 3 days batch operation at the condition of system recovery of 30 %, applied pressure 11.5 $kg_f/cm^2$ and room temperature. During 42 hours continuous operation leading to 5-fold decrease in waste volume, nearly constant permeation flux of 390 l/m$^2$-hr was maintained and the permeate with average CO$_{Mn}$, 300 ppm was obtained which could be used for washing the remaining paint solution in ion-exchange tower instead of demineralized water. Also COD$_{Mn}$ rejection as a function of running time was observed to be in the range of 78~87 % and the observed solvent rejections for ethyl cellusolve, buthyl cellusolve and n-butanol were 79 %, 87 % and 70 %, respectively.