• Journal of Korean Society of Transportation
• /
• v.28 no.5
• /
• pp.17-29
• /
• 2010

The main objective of this study is to consider the necessity of introducing owner expenses in estimating the cost of traffic accidents, as is done in some advanced countries. It is known as "owner cost" in the U.S, "enterprise project price" in Japan, and "human cost" in the U.K. To achieve this, the seriousness and present state of post-traumatic stress disorder (PTSD) of traffic accident offenders, which is generally not observed when traffic accidents occur, are evaluated; countermeasures reflecting personal characteristics are prepared according to degree of affliction. The results could be summarized as follows. First, the present condition and seriousness of PTSD from traffic accidents that has been estimated only within the accidents offenders are evaluated through a survey. Second, a distinction analysis model is developed. 'Insomnia caused by accidents' and 'mental daunting in accident situations or similar ones during driving' are chosen as the variables of the discriminant. Third, as a result of the construction of an Ordered Probit Model to comprehend the seriousness of PTSD, the variables turns out in the order of 'seriousness of the most damaged victim, 'nightmare about the accident', 'insomnia experience', 'mental daunting during driving', 'gender', and 'major driving area'. Finally, the cures reflecting characteristics of gender and region are suggested, which are preferred for degree of seriousness of PTSD. The analysis shows that the method to minimize the damage, such as decline of work efficiency, by moving ahead the rehabilitation of the offenders would be suggested and this could minimize the direct and indirect damages that could happen to business owners for whom the drivers work.

• Physical Therapy Korea
• /
• v.12 no.3
• /
• pp.84-93
• /
• 2005

The purpose of this study was to find prevalence and the relevant factors of low back pain among taxi-drivers. Information were obtained by a self-administered questionnaire during september, 2004, from 83 taxi-drivers in Gimhae, Kyung Nam province. The data were analyzed by chi-square test and Multiple Logistic Regression(if this is a proper noun, it needs to be capital, if not it needs lower case) by using SPSS 10.0 program. The result were as follows: 1) The prevalence rate of low back pain during lifetime was 81.9% among 83 taxi-drivers. 2) Statistically significant factors related to low back pain during lifetime were sleeping time(p<.05). 3) Through the multiple logistic regression, significantly relevant factors with low back pain were alcohol drinking (OR=.017, 95% CI=.001~.509), and sleeping time (OR=.111, 95% CI=.020~.636). It is necessary to study on a preventive measure of low back pain and systematic human engineering approach through objective clinical research.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.559-563
• /
• 1996

Total 215 magnet power supplies are under operation in Pohang Light Source(PLS). Current, voltage and peak power handling capabilities of DC power supply are in the range of 21 to 643V, 45 to 850A and 0.94 to 531KW, respectively. The DC power supplies can be categoriezed as uni-polar and bipolar power. Typical required stability and ripple of uni-polar power supplies are ${\pm}0.005%$ and ${\pm}0.05%$, respectively. The bipolar power supplies should be maintained within ${\pm}0.05%$ stability and ${\pm}0.5%$ ripple. Precise measurement results show that all power supplies meet or exceed the required specifications. The long term operation reliability to be sufficient for a stable operation of the Pohang Light Source.

• Fire Science and Engineering
• /
• v.27 no.6
• /
• pp.44-49
• /
• 2013

As the polyethylene of high strength and ductility stabilized chemically has been mass-produced, it is spreading widely as material of industrial piping and water service piping. Recently, High density polyethylene (HDPE) pipe has been used even in water supply system of plant as buried pipe instead of cast iron pipe in domestic, but HDPE pipe has a probability of occurrence of damage if plant design and operating conditions are not considered. As a result of reviewing with respect of system design engineering based on operating conditions and verification test results, the specific design criteria for the use of HDPE piping in fire water supply system need to be established because of the possibility of crack damage due to water hammer.

• Journal of the korean Society of Automotive Engineers
• /
• v.7 no.3
• /
• pp.1-10
• /
• 1985

한국의 자동차산업은 생산능력이 경제단위로 들어서고, 수출을 통해 선진국 자동차산체와 세계시 장에서 경합을 하지 않으면 안 될 성년기에 접어들고 있다. 따라서 경험적 강화를 위해서는 생 산단위의 증가 뿐만 아니라 자체기술개발능력도 향상해야 한다. 기술개발의 첫째 화제가 현재 외국으로부터 기술도입한 제품의 자체개발이 대상으로 된다는 것은 재론의 여지가 없다. 그러나, 앞으로 제품개발을 해 나가는데 수반되는 기술개발을 효과적으로 하기 위해서는, 선진자동차산 업의 기술개발동향과 Marketing차원에서 시장변활를 연밀히 분석, 검토함으로써 기술개발과제를 중점적으로 선택하고, 연구설비투자와 연구인력을 성별투입해야 할 것이다. 이런 관점에서 최 근의 자동차기술 개발동향을 개관하고 1980년대 후반의 개발동향을 전망해 보고자 한다. 자동차 제품기술은, 첫재 석유와 원재로, 부품, 노동력의 가격상승과 둘재 환경, 안전도, 연비면의 규제 강화, 셋째 사용자의 편이 안락한 문전의 추구라고 하는 세가지 주요인의 이호연관에 의해 그 개발방향이 결정된다고 할 수 있다. 현재, 미,일 자동차업체는, 가솔린 및 디젤 왕복내연기관 의 기존 동력원과 FF, FR 및 4WD의 기존구동방식을 유지하면서, 엔진 등 주요기능부품의 최적 제어와 운전자의 편이성향상 및 운전정보 제공을 위한 전자기술의 적용, 경량재질 및 세라믹스 등의 신소재 적용, 실용화, 그리고 유가상승에 대비한 대체연료의 개발연구를 주개발과제로 삼고 있으며, 이 주세는 80년대 후반까지 지속될 것으로 보여진다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.2
• /
• pp.455-460
• /
• 2010

The high-efficiency induction motor reduces the generation loss of conventional induction motors and saves energy with less electricity consumed, enabling the return of initial facilities investments on a shorter-term basis due to its low operation cost and allowing the extension of the life of the motor. Poscore has entered the phase of development of high-efficiency induction motor based on its experiences to date in cooperation with electricity researchers. This paper examines the development of the small motor die for the high-efficiency induction motor.

• Tunnel and Underground Space
• /
• v.17 no.5
• /
• pp.337-349
• /
• 2007

Yearly, it seems the fact that the numbers of tunnels with wide sections are on the rise as the length of tunnel and number of lanes continues increasing. According to these trends, well-schemed plans of design, construction and management related with tunnel safety has become to be crucial. It is a high possibility to be observed by the fact that the direct effects of casualties and property damages are caused by the situations of car collisions, bump to solid structures by careless driving and the outbreak on vehicles by mechanical fault. Therefore, in order to prevent these types of accidents, we would make issues md adopt appropriate mechanical and management plans of emergency exits and disaster prevention equipments inside of tunnel, based on up-to dated experiences and study of foreign cases, to structural design technology. The objectives of this study are to recognize related actual problems and suggest improvement plans.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.2 no.1
• /
• pp.23-34
• /
• 2004

To validate the previous conceptual design of cover system, construction of the engineered barrier test facility is completed and the performance tests of the disposal cover system are conducted. The disposal test facility is composed of the multi-purpose working space, the six test cells and the disposal information space for the PR center. The dedicated detection system measures the water content, the temperature, the matric potential of each cover layer and the accumulated water volume of lateral drainage. Short-term experiments on the disposal cover layer using the artificial rainfall system are implemented. The sand drainage layer shows the satisfactory performance as intended in the design stage. The artificial rainfall does not affect the temperature of cover layers. It is investigated that high water infiltration of the artificial rainfall changes the matric potential in each cover layer. This facility is expected to increase the public information about the national radioactive waste disposal program and the effort for the safety of the planned disposal facility.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.6
• /
• pp.668-676
• /
• 2016

The accelerated convergence of automobiles and ICT has led to an increase in in-vehicle electronic devices designed to enhance the safety and convenience of drivers. Consequently, the information presentation on in-vehicle display systems for drivers and passengers need to be taken into account in order to guarantee driving stability while satisfying the needs of UX-based design users. This study compared and evaluated requirements for information items shown on in-vehicle displays regarding driving safety and convenience by groups according to driving career. A total of 38 information items related to safety and convenience that can be displayed while driving and pulling over were collected. Their level of necessity was tested and evaluated by 234 drivers. Using the results, we conducted a comparative analysis on the requirements for information presentation on in-vehicle display systems by groups according to driving career.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.364-367
• /
• 2007

According to increase of construction projects which is accomplished in the town, diaphragm wall method was proposed. This method diminished noise and vibration. And it is able to excavate deeper than other methods. But excavation work is difficult to maintain vertical and requires much time to work. Also the work result depends on know-how, experience and intuition of excavating machine operator. We interviewed technical experts related with slurry wall method and find equipment's characteristics. We used cost-concern matrix to investigate the propriety for the introduction of trench cutter automation. Through the research, it is proper to apply trench cutter automation.