• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1567-1572
• /
• 2012

An IPC(instrument panel Cluster) is a useful device that provides driving information to the driver. The information includes the vehicle speed, RPM, mileage, etc. The traditional IPC has been mostly implemented with mechanical technique. According to increment of needs for the convenience of IPC by user, the IPC must provide graphical interface and efficient driving information. Also the user-friendly IPC is needed by drivers. Thus flexible and robust software structure and development methods are required in order to develop IPC. In this paper, we propose software architecture and design method for the IPC using modeling method. We use MVC model and UML to model software architecture because they have flexible and robust characteristics. We can develop the various forms of information screen by separating views from model by using state diagram and class diagram in UML. Through this, the cost saving and ease of maintenance can be expected. The development time and cost can be reduced by using proposed method.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1321-1326
• /
• 2012

An IPC(instrument panel Cluster) is a useful device that provides driving information to the driver. The information includes the vehicle speed, RPM, mileage, etc. The traditional IPC has been mostly implemented with mechanical technique. According to increment of needs for the convenience of IPC by user, the IPC must provide graphical interface and efficient driving information. Also the user-friendly IPC is needed by drivers. Thus flexible and robust software structure and development methods are required in order to develop IPC. In this paper, we propose software architecture and design method for the IPC using modeling method. We use MVC model and UML to model software architecture because they have flexible and robust characteristics. We can develop the various forms of information screen by separating views from model by using state diagram and class diagram in UML. Through this, the cost saving and ease of maintenance can be expected. The development time and cost can be reduced by using proposed method.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.4
• /
• pp.118-129
• /
• 2008

This paper describes an IEEE 802.15.4-based hierarchical sensor network model for a VAWS(Vehicle Approach Warning System) which provides the drivers of vehicles approaching a sharp turn with the information about vehicles approaching the same turn from the opposite end. In the proposed network model, a tree-structured topology, that can prolong the lifetime of network is formed in a self-organizing manner by a topology control protocol. A simple but efficient routing protocol, that creates and maintains routing tables based on the network topology organized by the topology control protocol, transports data packets generated from the sensor nodes to the base station which then forwards it to a display processor. These protocols are designed as a network layer extension to the IEEE 802.15.4 MAC. In the simulation, which models a scenario with a sharp turn, it is shown that the proposed network model achieves a high-level performance in terms of both energy efficiency and throughput simultaneously.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.1
• /
• pp.291-310
• /
• 2023

This study explores the factors which affect user acceptance for Robo Taxi, an electricity-based Autonomous Vehicles based on a Value based Adoption Model. The three main factors of benefit (usefulness and enjoyment), sacrifice (technicality and perceived fee level), and user experience about mobility services such as car sharing, taxi, and autonomous vehicles, were finally selected as independent variables as a influential factors on perceived values and adoption intention of Robo taxi. The study found that usefulness, enjoyment, and perceived fee had a significant effects on adoption intention, and some user experiences had a significant effect on benefit factors. This study has important implications for incorporating the Value-based Adoption Model results into the service design for the activation of Robo taxi, and furthermore, they can provide a theoretical basis for effective use of the research findings.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.511-514
• /
• 2005

This paper propose an advanced control strategy to improve vehicle handling and directional stability by integrating Active Front Steering(AFS) with Electronic Stability Program(ESP) . The effect of the integrated control system on the vehicle handling characteristics and directional stability is studied through a close loop computer simulation of and eight degree of freedom nonlinear vehicle model and driver model. Simulation results confirm the effectiveness of the proposed control system and the overall improvements in vehicle handling and directional stability

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.2
• /
• pp.135-141
• /
• 2001

차량 충돌시 자동차의 시트는 승객 및 운전자를 보호해야 한다. 따라서 자동차시트는 충분한 강도를 가져야 하며 이것은 여러 가지 법규에 의해서 제재되고 있다. 물리적 실험 결과가 법규에 정한 규정치를 만족시키기 위해 과대설계 될 수 있다. 그러나 이것은 연비를 줄이기 위한 경량화의 만족이라는 설계요구에 상충한다. 본 논문에서는 헤드레스트 강도시험을 시뮬레이션하고 과대 설계되어 있다고 판단되는 어퍼암을 최적화 모델로 최적설계를 수행하였다. 순차 이차 계획법인 PLBA 알고리즘과 민감도 해석을 위하여 직접근사해석법을 사용하였다.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.6 no.4
• /
• pp.249-254
• /
• 2013

In the area of computer vision, face recognition is being intensively researched. It is generally known that before a face is recognized it must be localized. Skin-color information is an important feature to segment skin-color regions. To extract skin-color regions the skin-color model based on multi-layer perceptron has been proposed. Extracted regions are analyzed to emphasize ellipsoidal regions. The results from this study show good accuracy for our vehicle driver face detection system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.6 s.249
• /
• pp.684-690
• /
• 2006

This study proposes and validates a new column type electric power steering system (EPS-TT). It is driven by a uni-directional motor and two electro-magnetic clutches. The assist motor produces assist torque in only one direction and two clutches transmit the torque to the column of steering system in either left or right direction with respect to the steering input. A full order and a reduced order models are developed to evaluate the EPS-TT. Models are also used to investigate the vehicle responses. A PID control logic is designed to control the torque of the assist motor. A driver model is applied to the system and the resulting performances are analyzed. The results show that the performances of the full order model are similar to those of reduced order model. The results also prove that the performances achieved by the EPS-TT are improved compared to those of a conventional EPS-TT across the frequency domain.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.04a
• /
• pp.516-517
• /
• 2013

Whole body vibration is very important for operators in construction equipment (CE) industry. There is ISO 2631 regulation to protect operators of CE. Recently WBV is one of critical performance parameters of CE to give operators much better comfortable working environment. And there are many kinds of numerically simplified human body model for the motor industry. We applied one human body model in ISO 5982 for the CE development at early stage. And we've checked the validity of this model to consider WBV by the operator comfort point of view.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.570-571
• /
• 2014

차량의 고속 주행 시 운전자가 인지하게 되는 공력소음은 대부분 차량 전방부의 A 필라 부근에서 발생하는 소음원에 의해 전달된다. A 필라 부근에는 다양한 모양의 돌출물들이 부착되어 있어서 차량 주변의 고속의 유동과의 상호 작용에 의해 다양한 공력 소음이 발생하게 된다. 이러한 차량 전방부의 대표적인 소음 인자인 A 필라 형상에 의한 와류 및 아웃사이드 미러에 의한 유동 구조 변화에 의한 실내 투과 소음에 대해 실험 및 소음원 분석을 수행하였다. 차량 내외부의 복잡한 구조와 재질에 의한 영향을 최소화 하고자 실차 형상 및 실내 조건을 간략화 시킨 차량 단순 모델을 이용해서 A 필라 주변부의 형상에 의한 주요 주요 공력 소음 인자에 대해 기여도를 분석했으며, 실험 결과는 다양한 CAE S/W 의 실내음 예측 결과의 정밀도를 분석하기 위해 사용되었다.